Having problems with your Whirlpool GU2400XTP Built-in Dishwasher ?

We have a Whirlpool GU980 Series Dishwasher. All the lights work. No matter what setting I use, it fills up, and then nothing happens. The "washing" light will be turned on, but nothing happens. I try to drain the machine, it will make a sound like it's going to begin a process, then it just stops. Do these things just "die" after some time? This machine is 7 years old.


Answers :

Sounds like something is caught in the pump impeller. you will need to take the pump apart inside the tub.
Repair Help & Product Troubleshooting for Whirlpool GU2400XTP Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

We have a Whirlpool GU980 Series Dishwasher. All the lights work. No matter what setting I use, it fills up, and then nothing happens. The "washing" light will be turned on, but nothing happens. I try to drain the machine, it will make a sound like it's going to begin a process, then it just stops. Do these things just "die" after some time? This machine is 7 years old.


Sounds like something is caught in the pump impeller. you will need to take the pump apart inside the tub. ... Whirlpool GU2400XTP Built-in Dishwasher

My kitchenaid KUDI01DL dishwasher began making a lot of noise while running, then subsequently decided not to circulate the water around to wash the dishes. It sounds like the motor is running (maybe) but there is no washing action going on. The machine will fill, drain and heat the water but nothing else. Is it likely that the pump/motor assembly has ceased to function properly? thanks...


The problem is very likely in the chopper and/or somewhat possible in the impeller. The chopper is replaceable from the front. Disassemble the pump, the chopper will be on its left side under a cover. That cover is kinda tricky to remove (remove all ... KitchenAid 24 in. KUDI01DL - Multiple Color Built-in Dishwasher

I have a Bosch SHU43C06UC/14. A few weeks ago it was making a loud terrible noise during the entire cycle. We figured it was on its last leg but it was still cleaning the dishes properly. Then with no explaination the noise stopped and the machine sounded normal again. Today when I started the machine it makes the normal sound when starting but it acts like it is stuck at the beginning and does not fill with water. The timer also does not count down.


... Bosch 24 in. SHU43 Built-in Dishwasher

I have a Bosch SHU43C06UC/14. A few weeks ago it was making a loud terrible noise during the entire cycle. We figured it was on its last leg but it was still cleaning the dishes properly. Then with no explaination the noise stopped and the machine sounded normal again. Today when I started the machine it makes the normal sound when starting, but it acts like it is stuck at the beginning and does not fill with water. The timer also does not count down.


... Bosch 24 in. SHU43 Built-in Dishwasher

Had my Maytag dishwasher for just over 2 years. Lately is has been making a loud grinding/vibrating noise - like something is stuck. I actually pulled out a piece of a plastic twist tie or something and thought I had solved the problem. Worked like a charm for a couple of days and suddenly the sound is back - and worse! I've read here that you should remove the bottom piece and make sure nothing is stuck before calling service. I'm the woman that's going to do this and could use some guidance ..


... Maytag 24 in. MDB4651A Built-in Dishwasher

I have a Kenmore Quietguard Standard that I purchased around 2005. It will begin the cycle, but 'sticks' and makes a loud screeching sound... like it sticks when it's to begin washing. Help! I'm lost without my dishwasher and know nothing about repair but I think I might be able to if I knew what was causing this and what to do.y


... Kenmore 24 in. 15142 Built-in Dishwasher

My dishwasher begins its cycle with a whirring noise, what sounds like the powder drawer then clicks open, but after that nothing happens. The water does not come in. The dial clicks round a couple more points, the machine 'whirrs' again, but still no water/washing action. The machine then just stops/cuts out. Is this a plumbing problem or an electrical problem?


My guess is that the inlet valve is not operating or there is no water supply to the dishwasher.If it is the inlet valve, replacement is not expensive and it is easy to get to (it is on the end of the cold water hose inside the dishwasher usually at ... Electrolux 23 in. ESI602 Free-standing Dishwasher

My Kenmore Elite suddenly stopped filling with water. I pushed start but when I checked it hours later the soap dispenser door had opened, the soap is just lying in a puddle, and nothing is clean but the clean light on the front panel is blinking. I tried again to no avail. Any ideas? I've had the machine since it first came on the market and have had other issues with it--it never drains completely, it makes sounds like someone revving a sports car engine when the drain pump is engaged, my dish


Https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a4 ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

I have a bosch dishwasher model number sgv46m03.when i turn it on it sounds like its running,there is water going to it but it wont wash.when the door is open it still makes the same noise,any idea what it could be. the machine was working perfect but was doing some work in the house so it was not in use for 3 months.


... Bosch Dishwashers

The electronic panel on the top of the door doesnt light up anymore and is unresponsive, when the power is turned on, the machine makes a sound like its running or draining or something, but nothing is happening. This all started after a potential electrical disruption following a power outage. Perhaps there is a fuse or some relatively easy way to fix this? or am I screwed and should just call a repair man. Thanks for your suggestions, Brodie


... Bosch 24 in. SHX56B05 Stainless Steel Built-in Dishwasher

Burning Smell It will sound normal and then after filling w/water it starts making a loud clicking sound from the dial and it has a terrible burning smell. If you leave it going it sounds like it is going through the cycles?


... Maytag PDB3600A Built-in Dishwasher

How to diagnose? My Kenmore won't run. First it was flashing the clean light 7 times, so I figured out how to reset ("High Temp Scrub"/"Air Dry"/"High Temp Scrub"/"Air Dry"), but when I try to run a wash, it sounds like it's not getting water into the tub. When I checked it several minutes later, it was in "Cancel" mode, making a sound like it was draining (or trying to drain), then the clean light started flashing 7 times again. Clearly, the machine has something wrong but I don't know where to


Once this code goes off, it is not going to run. The module has picked up ths issue as you said. I would check the sensor first. You can make sure it is getting current by testing the circuit. ... Kenmore Dishwashers

Dishwasher wont fill with water. just before it stopped filling i was turning the dial (a lot) between the wash cycles back and forth to attempt to get it to fill and drain (I didn't let it go through a cycle). We also removed the hose from the machine as it had split and replaced it and we had the machine tilted on it's side. the dial still clicks round but it sounds like the pump is going and it doesn't seem to be filling with water. Help


Hi. I suspect that the timer mechanism will be the culprit here, but i recommended to inspect and test the water inlet valve, before replacing the timer. The valve is a known problem area, as well. Follow the valve inspection procedure below, careful ... Fisher DS603W / DS603B / DS603I Dishwasher

Our frigidaire model FDR252RBS1 makes a noise like it is running but the spray arm does not sound like it is actually washing. It makes the humming noise clear thru the cycle and nothing happens, wat


... Dishwashers

My dishwasher reaches 79 minutes and then stops. It makes this pressure sound like it is going to start but then doesn't.


... Maytag 24 in. MDBH950AWS Built-in Dishwasher

My Fisher and paykel Nemo dishwasher makes a funning on off sound when put on any cycle. Sound like water going through solinoid in short busts then stops , then starts again, after some time it then


... Fisher and Paykel Dishwashers

My dishwasher is making a buzzing sound, sounds like its coming from the undersided of the machine. Maybe while pumping water? It is pretty much a constant noise, subsided briefly relatively early in the cycle. In the manual, on page 21, it says under noises that it could be in the wash module and will stop when the object is ground up. Is that possible on this unit?


... Dishwashers

I have a whirlpool du1100xtps sudenly stop working when I plug the machine, the stop/drain button comes on, and about 15 seconds later turns off and the normal button comes on but blinking and after about 15 seconds the stop/drain buttom comes on too also blinking and then just keeps going on like that and nothing else happens??????? how can I fix it, or what is wrong with the machine?


... Whirlpool 24 in. DU1100XTPS Built-in Dishwasher

I have a Maytag dishwasher that's 17 yr. old; Model WU202, Series 01. When it's going through the washing cycle, it makes a noise that sounds like water going through a small tube. It'll happen at random times. What could it be?


... Maytag Dishwashers

Maytage dishwasher Machine is just over a year old. Started making loud sounds as if it was working to hard.Vibrating humming sounds. There is nothing in the way or jammed. Any suggestions before i call for repair.


Hi Fix it mom,\015\012\015\012If your courageous, pull the trays out of the way and remove the screen in bottom of the dishwasher to see if something is getting into the pump. By something I mean undesired matter. Straw, Twist tie, knife, toothpick ... Maytag 24 in. MDB4651A Built-in Dishwasher

Whirlpool dishwasher model# GU2451, two years old. On any cycle, it counts down to 44 and won't go any lower. It sounds like a motor is constantly running when it hits 44. It will continue like this until I shut off the machine. What needs to be fixed?


Hi,Go to the house breaker box and find the breaker for the dishwasher.Turn the power off form the box for 10 minutes and this will reset the system.This should usually clear any electronic glitches and enable you to start. ... Whirlpool Dishwashers

Hi - My Electrolux ESL63010 dishwasher seems to be stuck mid programme. It was part way through a programme when we had a pipe burst. Pipe all sorted now but the dishwasher just makes a noise like it is asking for water but nothing happens. When you open the door, it makes three short beeps and the light flashes on the programme menu. Any ideas how to solve? It definitely is not the pipes as the washing machine feeds from the same pipe and is working fine. Help!


... Dishwashers

KENMORE DISHWASHER Hi, My husband just received a reset "code" for our dishwasher and the light went off and we thought it was going to work. But now no water is going in, we can hear it making like a humming sound and its warm inside when we open the door. Can you guide us?


You probably have a build up of food under the bottom heating element. The excess food falls to the bottom and then clogs up the space where water collects to be heated. The heater works but there is no water to heat, so washer will go on to next pha ... Kenmore 24 in. 16019 Built-in Dishwasher

Moved homes and took old dishwasher to new home (about 3yrs old), now seems the machine is loud (sounds like disposal is louder) all insullation is still on machine. we did go fom carpet floor to tile floor. It is quiet when water filling and draining but loud in washer or rinse


Make sure your unit is secured properly[screwed up into counter and leveled], to minimise vibration. other wise you may want to try putting some insulation behind the kick plate. ... Dishwashers

Maytag mdb9150 dishwasher stopped at some point last night--found it this morning with flashing lights--I think "clean" and "heated dry", not sure.  I used "drain/off" to make sure there was mechanical noise--there was, so I don't think the machine is dead.  Purchased on 2001 with 5 year warranty, so out of luck there.  I tried turning off the electricity to the unit for a few hours; nothing improved.  When you start it (or think you have!) it makes noises for about a minute that sound promising


Check pump and solonoids click/work, if no mechanical noise, could be the circuit board, but they can be expensive. :(\015\012if the solenoids click, and allows water in, then the pump might be jammed, with grit, clean and reinstall... good luc ... Maytag 24 in. MDB9150A Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1448 seconds