Having problems with your Whirlpool MDBH979AWS Builtin Dishwasher ?

We have to cut out a tile floor under cabinet to accomadate height of MDBH979AWS dishwasher. What are the exact dimension of bottom


Answers :

Repair Help & Product Troubleshooting for Whirlpool MDBH979AWS Builtin Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

We have to cut out a tile floor under cabinet to accomadate height of MDBH979AWS dishwasher. What are the exact dimension of bottom


... Whirlpool MDBH979AWS Builtin Dishwasher

What are the exact cabinet dimensions of a Roper dishwasher, model #RUD3000? Thank you!


Hi,\015\012\015\012The manufacturer specified cabinet dimensions for this model are:\015\012\015\012Total width: 23 7/8" / 606mm\015\012Total height: 33 7/8" / 860mm\015\012Total depth (front to back): 24" / 610mm ... Roper 24 in. RUD3000 Built-in Dishwasher

Whirlpool DU8770XY2 dishwasher exact dimensions


... Dishwashers

Need exact dimensions of Maytag Performa dishwasher model PDB1100 or PDB2430


... Maytag Dishwashers

Hey Everyone! Ok try this one! I have been working on a KUDS25 Kitchenaid Dishwasher. It was leaking like a siv from the bottom. I replaced both top and bottom plastic bearings and also tightend all the screws at the bottom. Leak Gone, I thought. It now has small leaks down both sides. I have since been told by the owner that he took the door apart himself. I pulled out the dishwasher from the cabinet and ran it. I could see the leaks at the top on both sides of the door latch. I cou


Hello davidgalb. You can install a new gasket to seal the door again. That old seal is not flexible any more. That said, for my time and money I recommend a replacement dishwasher, this one has definitely seen better days. Joe ... Dishwashers

LG Dishwasher I just purchase a new LG Dishwasher. The installer told me that the dishwasher can not be flush to the Kitchen cabinets because of the metal cases around the dishwasher and also it can not be aligned with the top and bottom of the cabinets because the door is too thick to give it clearance to open. I have had two other dishwashers in this spot and never had any issue. Thoughts? Thanks, Jen


I can't say for sure, but it is possible this unit is deeper than previous units. The only way to tell for sure is to measure the previous unit and compare to this one.I would be suspect there may be something simple preventing the dishwa ... LG LDF6810ST Stainless Steel Built-in Dishwasher

I have an older Bosch dishwasher I just hooked up in my condo. WHen a cycle is done there is no water is located at the bottom of the inside of the dishwasher, yet 2 days later water will drip on the floor (with the dishwasher door closed) and I'll open the dishwasher door and therewill be 2" of water at the bottom. The flexible water discharge hole located in the sink base is located at the top of the base cabinet, and the hose runs completly 100% downward from that hole to the garbage disposa


When you empty you sink, some of the water is going down the drain hose of the dishwasher. take the drain hose up as far as possible in a swan neck ... Dishwashers

We have BOSH DISHWASHAR SRS3009. The water electrical pump is working, but remains on the bottom of cabinet dirty water. I have clean filters in the cabinet and put all pieces of food that may harm to the pump. May be i have to clean some additional filters? I will appreciate your help Michael Yachnis [email protected]


To remove object from trap/cylinder assembly\015\0121. Remove bottom rack.\015\0122.Graspthe assembly and turn it a1/4 turnclockwise.\015\0123.Lift outthe assembly\015\0124. Carefully examinethe assembly.If you find debris in ... Dishwashers

Leaking dishlex global 300. was dripping along the bottom right edge of the machine. Moved it out of the cabinet and tipped it slightly and water has run out everywhere from the bottom on both sides. What could this be? Thank you.


... Electrolux Dishwashers

We purchased an expensive top of the line Fisher and Paykel 2 dryer dishwasher when we did a total Kitchen rehaul over 1 year ago. We have been noticing water sitting in the bottom of the bottom drawer that smells like sulfur dioxide and now see water is making its way through the maple cabinet to below the sink. None of the plumbing under the sink is leaking. We also purchased a Fisher Paykel gas oven/range at the same time. We notice the oven does not appear to close completely with a tigh


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. If you have water leaks around the base of your dishwasher,\015\012you may be using a detergent that is ... Fisher and Paykel Dishwashers

I urgently need the template for dishwasher PDW9700N panel(pub # 5-x063). I ordered one last week and I got the owner's manual instead. I have an appointment to place the order for my cabinets at 5:00 this afternoon and cannot watir another week for the template to arrive. Can you help me by supplying the dimensions? If I have the outside dimensions of the panel, I can order it. Thanks, Don McCann


I finally got a real live person at GE who gave the specs for the panel and I was able to order my cabnits.\015\012\015\012Thanks,\015\012\015\012Don McCann ... GE Dishwashers

I noticed water coming from underneath my dishwasher so I pulled it out from the wall and found that underneath the factory installed installation there was a screw missing that holds the top dishwasher rack. The hardwood floor and bottom of the cabinet is ruined. While finding this problem, I also found rust on the bottom of the rack. Who do I need to speak with about this problem?


Speak with who you purchased the dishwasher from. They will be able to point you in the direction to get a replacement and file a complaint. All of this is provided you bought the machine in the last year. ... Kenmore Dishwashers

My cabinet maker needs to know the minimum height needed to install it in the custom cabinets. A copy of the specs. would be appreciated. Thanks.


There is no spec which is 100% correct - you should pick the dishwasher you want and buy it and if need be let him go pick it up ... Dishwashers

My portable dishwasher hose that attaches to the faucet is to short for where I want my portable dishwasher to sit. I would like for it to sit in one spot. I am not allowed to alter or cut holes in the side of cabinets, I am renting. Is there an extension for the hose to the faucet? If not, what can I do to make the hose longer? If I really have to I will cut the two hoses that comes from the dishwasher to the faucet, but I would rather have an extension first.


You should be able to find extension or replacement hoses that you can use to extend the existing hoses at a hardware store. If you need to join two hoses that have female connectors, adaptors with two male connections are available. ... Dishwashers

Bosch compact Logixx dishwasher (8401) will not start after it did turn on to start a cycle. Pump made laboured draining noises then seemed to cut out. Water remains in the bottom after last cycle.


... Bosch Dishwashers

Karcher pressure washer model 2.90 keeps cutting out black substance coming from bottom


... Karcher K2.26 Electric Power Washer

Karcher power washer keeps cutting out also black substance coming out of bottom


... Karcher Pressure Washers

Dishwasher leaking Our dishwasher all of a sudden started leaking. I've taken the front panel off the door and can see exactly where. It's not a hole or anything...it's at the front, left edge of the basin, the bottom left corner at the front. It seems that right after it fills with water, it starts to leak once water is moving around inside and washing cycle starts. It is as if big waves are being pushed to the front left corner and over the lip of the basin. I don't think the water level is to


Just an idea...if i'm understanding you correctly,could the door seal be creased there or folded over by use and age to permit this to happen? cause you said nothing is missing ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

Hello, We have a combination oven and dishwasher. Last week I filled up the dishwasher and after about 5 minutes a blue spark came out at the bottom and it cut the electricity off. Once the electricity was restored we started it again and after a few minutes it just stopped after filling up with water. It blew a fuse again but only one fuse this time and now doesn't switch on anymore. We have emptied all the water from the dishwasher and checked the filter, etc and wonder what could have gone wr


Hi, I contacted the Rosieres web site in France and sent a message using the link Contact Us. Here is the reply;Dear xxxxx,we advice you to contact:TELE MENAGER VIDEO SERVICE21 rue georges Doublet0610 ... Dishwashers

Dishwasher tub/material,glue i am trying to build a bead blast cabinet out of a old dishwasher. I need to cut and glue the plastic.


... Kenmore 24 in. 17019 Built-in Dishwasher

I have a kenmore Ultra Wash Dishwasher, Model 15825691. We were recently hit by lighting. Once hit, the dishwasher started up. Since then, all cycles work, however, at the end of any cycle, the dishwasher continues to run and fill the bottom of the washer up to about two inches and then cuts off, so when we open the washer, there is approx 2 inches of water inside no matter what. I have pressed the "Cancel/Drain" button, in which drains the water after two minutes, but when that is finished, the


There must be a problem wit the fill valve. Check which valve the water enters. Check first the wiring to the valve of the water inlet or where the water comes out to fill the washer. Check for physical evidence of damage on the solenoid (or contr ... Kenmore 24 in. 16539 Built-in Dishwasher

I need the dimensions for a bosch shv4313gb/17 dishwasher, width, height and diameter. can anyone help


... Bosch Dishwashers

Miele dishwasher G2870 scm. There is an F14 fault. I have cleaned the arms removed the waste basket from the bottom of the dishwasher and removed the two parts one with the large metal ball to expose the plastic wheel clog. There does not appear to be a blockage. I also removed the top arm and cleaned that out. I don't know what other inlets to check as the guide does not tell me exactly what an F14 fault is but explains F11,12,13. Can you help?


F14 on your model of dishwasher is indicating a blockage, poor water\015\012pressure or could be a fault with the pump pressure level switch or\015\012circulation pump.Filter and non return valve is cleaned of any blockages and if the fau ... Dishwashers

Hi - bought this dishwasher 1 year ago yesterday (it figures). Discovered last night that it hadn't drained properly the last time I used it (maybe 5 days before). There was about 2" of soapy-feeling water in the bottom of the cabinet. I put it through another cycle and the same thing happened. I only run it maybe every couple weeks. Can you tell me how to fix it?


Hi,Let me offer you a solution in 2 parts. A generic one needs you to investigate each and every aspect from Point 1 till End :-\015\012\015\012\015\012\015\012\015\012Drain line/air gap\015\012\015\012A\015\012clog in ... Dishwashers

I want to replace the door spring in an old Kenmore dishwasher, but the screws to remove the bottom panel are flush with the kitchen cabinets. Can I move the dishwasher forward about an inch to expose the screws?


Hi and welcome to FixYa, Initially, pls check the piping works and the drainage connections by visually inspecting these. Normally cabinet works at the sides should allow you this. Additionally, pls make sure that the electrical connecti ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0963 seconds