Having problems with your Zanussi 18 in. DE4744 Free-standing Dishwasher ?

Zannussi de4744 switch on dishwasher but it just hums seems to have washed but not full cicle and ideas chaps cant switch off says ready but hums


Answers :

Aquastop on water inlet tripped. Turn off and slightly undo main inlet hose. find water inlet valve and remove thin pipe from nipple. Turn m/c on for a few seconds, turn off and replace all pipes m/c will now fill and continue
Repair Help & Product Troubleshooting for Zanussi 18 in. DE4744 Free-standing Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Zannussi de4744 switch on dishwasher but it just hums seems to have washed but not full cicle and ideas chaps cant switch off says ready but hums


Aquastop on water inlet tripped. Turn off and slightly undo main inlet hose. find water inlet valve and remove thin pipe from nipple. Turn m/c on for a few seconds, turn off and replace all pipes m/c will now fill and continue ... Zanussi 18 in. DE4744 Free-standing Dishwasher

I have a Bosch SHE43 or SHE45 not sure which. Label with model / serial # was removed. Now there is a faint burning smell coming from the latch / front panel area. Thoughts? Local Bosch 'expert' says he cant do anything (not even a diagnostic) without that info. Ideas?


... Bosch 24 in. SHE43C05UC Stainless Steel Free-Standing Dishwasher

I have a bosch sgs53c12 dishwasher and the water light keeps comming on after about 20 seconds into a programme. I have switched it off and on, reset it and checked the inlet hose where it connects to the external pipe. It just sits there humming to itself. any ideas? help!!


Hello- Bosch installed an anti-flood device in bottom of unit. If water gets into this area ( from a leak, usually). To get water out, tip backwards, then forward. Use a couple of towels- water should come out. Common problem with these units. Let me ... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

I have a GE quietpower 3 and I cant get the door to shut. There is a green light on that says clean. There are no dishes or anything in the way of the door. I have no idea what is going on and I really do not want to phone my landlord. Please help!


The door latch is probably in the shut position. you need to move it to the open postion. ... Dishwashers

Hi My dishwasher seems to get stuck in a cycle when you start it - it lets water in for around 20 secs - then pumps it out - then lets water in for say 20 secs then pumps it out - over and over and over... Model - says electronic on the front, has a rotary selector switch and a power switch on the panel along with three indicator lights. SGS43EO2ZA/16 Type S1501B Can you advise? Gerard


Hello Gerard,\015\012\015\012This is an overfill 'fault' generally caused by one of the following:\015\012\015\0121. Faulty or incorrectly installed flow-meter\015\0122. An airlock in the fill chamber ... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

I have an Asko Model 1473/1503 with the word excellence on the front door panel. It is approx 14 yrs old. I noticed that the main switch has been failing and that I have had to giggle it about to latch. It has now completely given up the ghost and there is zero power to the dishwasher. The CB is on . I believe I have to change the main switch but I have no idea how to get at it to remove and replace it. Any ideas?


Http://www.repairclinic.com/smartsearch.aspx?SearchText=`Basko&gclid=CLuI1p7BypcCFQwNGgodD3kkSw\015\012 Call these guys, ther may be a diagram on their site, but I have called them several times in the past and they knew almost immediatlly ... Asko Dishwashers

I put dish soap in my thermador dishwasher on accident. It is now saying e15. The thermador customer service says a safety switch turned on and a technician needs to come out. Can I just flip the switch?


... Dishwashers

When you switch the dishwasher on, where the programme time cones up it says F. we tried to switch it on n restart again but it still says F and makes noise


Says here the overflow pipe night be blocked and needs to be cleared. When it's cleared if you still get a code "F" and it is still trying to pump dispite no water then remove the side panel and you will more than likely see you have water in the bas ... Neff 24 in. S5453X1 Built-in Dishwasher

Have a Miele G1220SC dishwasher. It recently developed a strange problem: when switching it on ALL program lights come on and the machine starts taking water. after a while it stops taking water and starts to pump water, all the time all program indicators remain on. if you leave it on a while ( about 4 or 5 minutes) it is impossible to switch off the machine with the main switch, all you can do to stop it is unplug it. anyone experienced something like this and have any idea what part is malfun


Follow this steps and fix it. God bless you\012 \012 Heating Element\012 \012 \012 \012 \012 \012 \012 \012 \012 ... Miele Dishwashers

Hum in Kitchen Aid Dishwasher Model 8531529. Stated last night. No hum when filling or draining - only during the wash cycle. Can still hear the water spinning inside during the wash cycle, but hum is loud. The water does fill & drain completely/correctly. Any ideas? Might this be an easy fix? or a likely repair man call? Thanks!!


Hi\015\012\015\012The hum sound that you hear is from the motor that is not\015\012working or is about to go out, the motor should be replaced. Hope this\015\012helps...please post back for further assistance.\015\012\015\012Dani ... KitchenAid Dishwashers

Code F2 I just replaced the door switch on an inoperable DD-602. My top drawer was working fine, but my bottom one has been offline for a while (door switch failed and I never got around to fixing it since I had the top). Well, my top finally failed too so I replaced both switches. Looks like everything is good on the top, but my bottom is erroring with an F2 code now. Kindof makes a thumping noise as it starts the cycle -- maybe 3-5 short thumps and then a 10 second delay, repeats. Any ideas? C


F2= \015\012The motor has not\015\012been sensed rotating\015\012\003 Foreign object has jammed the rotor\015\012\003 The rotor has failed\015\012\003 The hall sensor has failed\015\012\003 The electronic controller has ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Neff 4456 water resevoir not filling. Checked float switch and all OK. Checked water supply and all OK. Filled resevoir manually from top of resevoir and program cycle starts but stops when rinse is required.Have stripped down and cleaned switch with float switches as I have had that problem before getting clogged. Any ideas


... Neff 24 in. S4456 Built-in Dishwasher

Miele g892 scu plus, about 5 years old. when on, all it does is run some motor (humming sound) and flash salt or intake/drain. No program lights on. Sometimes can be reset so rinse light comes on and nothing blinks, but humming motor still runs and salt eventually blinks. I removed toekick panel; there is water in pan. I disconnect drain hose, only a little water came out. Any ideas?


... Miele G892SC SS Dishwasher

Bosch KGV2620GB/03 Hi, I have a Bosch KGV2620GB/03 fridge freezer (bottom freezer, free-standing, the product listed below isn't right) and the light in the fridge won't switch off when the door closes. Any ideas? I assume it's something to do with the switch that registers the door has closed, but not sure how to fix. It's an electronic control, so there's no temperature wheel/switch inside, and we don't have the user guide (which I also can't find online!). Any help much appreciated. Dan


Hi,\015\012 If it is the one I am thinking of, then the whole light assembly is actually able to move and this also acts as the switch.\015\012\015\012Turn off the appliance and unplug.\015\012\015\012You should be able ... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

Karcher K2.36 Pressure Washer I've just fired up my Karcher for the first time since last year and the motor started running fine, I then switched on the tap to allow the water through and the motor cut out. Now it won't restart, any ideas? I'm wondering whether the water supply should have been on before I switched the motor on but it's too late now! Help!


The water must be switched on, and seen to be running freely from the nozzle for a few seconds before switching on the power - suggest you check the fuse in the plug, and then try the above. ... Karcher K2.26 Electric Power Washer

Coleman mobile home furnace...Model number DGAA077BDTB...The furnace about a month ago started going out ( flash code- Combustion Air switch stuck closed)We replaced the thermostat on the wall and it stopped doing it and ran fine then last night it stopped again ( Combustion air switch failed to close) and when i got up the furnace was working and now for the past few hours it refuses to do anything...I am on a very very tight budget...and need some idea of what is wrong and do i need a professi


I had the same errror code on my coleman furnace (3 flashes combustion air switch failed to close) but at first didnt realize there was even a light that gave codes..Anyways long story short, after searching many forums one guy mentioned about the fu ... Dishwashers

Neff built in dishwasher model no: S4453N0GB/07 When you switch the dishwasher on all the relevent lights swich on, indicating the dishwasher is ready to use. but when you switch the start button it clicks as if it is going to start but swiches off again.


We fixed the problem at home. The Start button had a loose connection.unscrewed the panel and pushed all the wires in and were able to restart the dishwasher. ... Neff 24 in. S4456 Built-in Dishwasher

I have an iberna 10-80. when i switch it on all the lights flash and bleeps in time with the flashing. the book says to switch off and call an engineer... any suggestions to fix it before paying out?


... Dishwashers

I have a similar problem to another person. The drain on the dish drawer was blocked. The unit now shows an F1 error code ( flood?) and the pump runs continuously even after I've unblocked everything. I've tried switching it off for ages and drying everything out. When I switch it on again it shows the wash programme but then reverts to F1 and the pump motor runs continuously. Any ideas to cancel the F1 code?


The flood sensor on this unit is a PC board in the base, so you would need to remove the lower drawer and dry it out under there. If the base is dry and you still have the error, you can take a look at that sensor and clean any corrosion/minerals off ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Indesit d41 dishwasher overfilling, pressure switch seems ok(checked with multimeter) ,when pressure switch is manually operated the electro fill valve remains open. only time fill vave shuts is when power is off or door is open. can someone please help as i cant find wiring diagram or service guide online


Possible faulty pressure switch or a faulty drain pump ... Indesit 18 in. D41 Slim-Line Free-standing Dishwasher

Gritty Dishes My dishwasher is an indesit D4200 and is leaving a gritty film on all my dishes - it cant be the tablets because i have to use Fairy. I have cleaned it from top to bottom and put a cleaner tablet through. I live in the highlands so it cant be a hard water problem. any ideas? im really stuck! Thanks


... KitchenAid 24 in. KUDS25SH Built-in Dishwasher

If i switch on my dishwasher, all lights flash on and off red,and it's makes the beeping noise when it does when the wash is finished... no water is coming in either... please help... it does nothing and you cannot press any of the buttons to use a cycle. it is making a humming noise. i have checked the filter in the bottom of it, and have switched it off at the wall and back on again. cheers,


Un plug it remove bottom drawer. look in back left corner of cabnet on bottom, is it wet dry it out and try again ... Fisher and Paykel Dishwashers

Belling IDW604 Hi, I have an error code E4 showing on this machine any ideas on how to fix it?? it seems the pump is wanting to start but then does not I cant see a block in the tubes and I want clean dishes!! Any ideas would be gratefully recieved Rebecca


I found the solution myself. On the bottom plate, there is a float and a microswitch, when the water leaks onto the bottom plate it raises the float and activates the microswith which shuts down the machine and shows E4 on display. To get rid of the ... Belling 24 in. IDW603 Built-in Dishwasher

I have a Beko DE 2541f slimline dishwasher and it seems to have got stuck draining - have switched it off and removed power completely but it just starts draining as soon as it's switched on again. Any ideas?


Hi there.......your problem can occur when the sump of your apliance becomes flodded....this activates the anti flood switch which causes the drain pump to run....soloution is to dry out the sump or remove machine from its location...tilt it back let ... Beko 24 in. D3731F Free-standing Dishwasher

Switches have dropped inside the dishwasher. My husband opened up the dishwasher and moved the switches up but they fell again. Any ideas of what to look for in order to fix it?


Should be some type of clip or retainer that holds them in. What brand and model number do you have and maybe I can find out for sure ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0592 seconds