Having problems with your Zanussi 23 in. ZDi6053SX Built-in Dishwasher ?

Cant get my zdt6053 dishwasher working. press the on/off switch and a green light will flash but will go off again and nothing happens. please help. Ray


Answers :

My Zanussi ZDT 6503 INTERGRATED DISHWAHER IS STUCK ON A PROGRAME HOW DO I RESET IT
Repair Help & Product Troubleshooting for Zanussi 23 in. ZDi6053SX Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Cant get my zdt6053 dishwasher working. press the on/off switch and a green light will flash but will go off again and nothing happens. please help. Ray


My Zanussi ZDT 6503 INTERGRATED DISHWAHER IS STUCK ON A PROGRAME HOW DO I RESET IT ... Zanussi 23 in. ZDi6053SX Built-in Dishwasher

My Bosch Exxcel Dishwasher has three warning lights flashing and the motor running but nothing is happening. I don't have a manual so can't look up the problem. Can anyone help please?


... Bosch Dishwashers

After selecting a program, the dishwasher beeps for a while and the 3 buttons on the left flash too. Program wont start, water wont fill and nothing happens. THe lights keep flashing but the beeps stop for about 30 secon ds then start again. Help me Please.


Basically the dishwasher is telling you there is a fault - Not so useful I know! Plug out the machine and leave it for five minutes and see will it reset. If that does not work, you will need to reset it manually. To do this consult the manual. If yo ... Hotpoint 18 in. DC28 Slim-Line Built-in Dishwasher

Hi!, my Ariston L64 dishwasger refuses to start. It seems to reset OK when the dial is turned fully to the left. After the beeps I select a cycle and nothing happens for some time, then eventually the first two lights begin flashing together.That is as far as it goes. Can you help me fix this problem please? Donna


... Dishwashers

I have a KitchenAid Dishwasher KUDIO1iLBS2 and none of the lights come on and if I press any of the buttons nothing happens. The unit is getting power to it as I shocked myself. I did ordered and replaced the control board and still nothing is happening. Any suggestions or ideas? Is there a reset button or is there a possible fuse that is out that would make the lights not come on? Please help.


... KitchenAid Dishwashers

Lights on Dishwasher light up but nothing happens. When I reset power it lights up the high temp and sanitize button light up and LED displays PF. After I open the door they stop flashing. the far left five buttons light up when I push them and a corresponding number displays on the LED screen. the only lights that do not come on are the Delay button and power button. Don't know if they are working or just don't light up. No matter what lights up the unit does not turn on....:( ? help can't fin


Pf is power failure\015\012 your loosing voltage to the unit \015\012it may just be the door switch or it could be in the control\015\012 try starting the unit but keep your hand on the unit pushing the door in place,, its not a g ... Electrolux 24 in. EDW5500DSS Stainless Steel Built-in Dishwasher

My Asko Dishwasher D1976 on the main panel all of the top lights are on and in the display window it flashes F2. The motor is on but nothing else is happening can you help. I have checked that drains are clear and I tried holding the start button on. Nothing I do is helping.


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Error F2 in asko\015\012dishwashers indicate high water level. This may happen due to plugged drain\015\012pump or due to faulty water ... Asko D1976CSTM Built-in Dishwasher

The dishwasher will not run. The Clean light keeps flashing with 7 light intervals. When you press Cancel/Drain, the timer has 2 minutes and runs for 2 minutes. Not sure if it is drain since there is nothing to drain. Please help.


Hi\015\012\015\012If clean light\015\012is blinking 7 times then it may be an issue with heater circuit, door switch or\015\012wash pump. If yes then please reset the power to the dishwasher. After, 5\015\012minutes check if ... Whirlpool 24 in. GU2500 XTP Built-in Dishwasher

I have haier dishwasher when you selet a programme the light *** on but nothing happens then the light starts flashing followed by 6 beeps and repeated 4 time what would cause this help kind regards tracey fletcher


This is an error code.... how many times does the light flash?? ... Haier ESD300 / ESD301 Built-in Dishwasher

We have a kenwood kdw12st3a dishwasher - ever since we have had it, it has been nothing but trouble. It constantly flashes e4 so we have tipped it and drained the water out of the bottom (as advised) and it works for a couple of days then happens again. Now it refuses to work at all - cant set a programme - nothing at all - please help!


To clear the fault you need to remove the two baskets from the dishwasher.Slide it out from under the worktop and lean it forward to about 45 degrees.If it is already full of water, turn on the power whilst pushing the program ... Dishwashers

I have a Beko DE2431FW Dishwasher which has stopped working. I select a cycle and then press start, the green light starts to flash and the cycle begins to start but after about 30 seconds it stops and the red 'end' light comes on. this happens no matter what cycle I chose. Can anybody help me with this please?


... Dishwashers

The flashing light blinks 7 times on the clean indicator area , but the dishwasher will not function and when you press cancel it starts running but nothing washes through any cycle at all. please help


Ok well usually it is not sensing a temperature change in the water or\015\012not getting hot enough. so you can reset the dishwasher and try running\015\012the hot water in the sink before starting the dishwasher. if it fails\015\012again there is a ... KitchenAid Dishwashers

I have a Whirlpool G2P DWI dishwasher and when I start the program the light comes on to say it's ready, but when I close the door nothing happens. I have tried turning it off and on again and also cleaned the filter but this hasn't done anything. Please help


HiThanks for using FixYa. To start with press and hold Air Dry for 5 seconds until the light turns off. If still the issue is not resolved then it means that the control has gone bad and needs to be replaced. Please do accept ... Dishwashers

If i switch on my dishwasher, all lights flash on and off red,and it's makes the beeping noise when it does when the wash is finished... no water is coming in either... please help... it does nothing and you cannot press any of the buttons to use a cycle. it is making a humming noise. i have checked the filter in the bottom of it, and have switched it off at the wall and back on again. cheers,


Un plug it remove bottom drawer. look in back left corner of cabnet on bottom, is it wet dry it out and try again ... Fisher and Paykel Dishwashers

I think my dishwasher is blocked, there is water in the bottom of it and when i turn it on the light comes on but when i press start nothing happens, ive cleaned the filter and also disconnected the hose and blew down it, still does not work, please help,


... Hotpoint 24 in. DF55 Free-standing Dishwasher

Hi - My Electrolux ESL63010 dishwasher seems to be stuck mid programme. It was part way through a programme when we had a pipe burst. Pipe all sorted now but the dishwasher just makes a noise like it is asking for water but nothing happens. When you open the door, it makes three short beeps and the light flashes on the programme menu. Any ideas how to solve? It definitely is not the pipes as the washing machine feeds from the same pipe and is working fine. Help!


... Dishwashers

My dishwasher whirlpool model GU1200XTLS3 wont start. When I push the nomal wash button, it will light up for a few seconds then off and nothing happen. Please help!


... Whirlpool GU1200XTLS Stainless Steel Dishwasher

I have a Tecnik TKD795/3 built in dishwasher. It is now making a gurgling noise as though it is draining water when I try to start the cycle, but the cycle does not start and no lights come on at all. I have tried pressing the outside two buttons to reset, but absolutely nothing happens and the gurgling noise continues until I release the power button. Can you help please?


... Tecnik 24 in. TKD795/3 Built-in Dishwasher

The green light indicator on my Bauknech dishwasher is blinking and the machine does not work. What can i do? Itried to switch off and restart but it does not stop blinking and nothing happens. Please, help!


Trip the breaker again. While power is off, dry all the water, if any from the bottom of the tub. Remove drain well from inside the tub and clean it.Access the back of the appliance and check inlet and drain hose for restriction or blocka ... Bauknecht Dishwashers

Whirlpool ADP5966 developed a leak at small rubber connection from circulation pump. Leak repaired, machine reconnected, programme selected, some sound for about 20 secs then shutdown. Display showed F6 once then nothing. L.E.D.programme indicator glows, display remains blank, start light flashing. Help please


... Whirlpool Dishwashers

HI TIMES TODAY I HAVE PUT ON MY HOOVER DISHWASHER , IT GOES THROUGH THE CYCLE RIGHT UP TILL THE DRYING THEN THE FLASHING LIGHT THAT SHOWS ITS WORKING JUST STOPS AND THEN NOTHING, PLEASE HELP


Normal\012 0\012 \012 \012 \012 \012 \012 \012 MicrosoftInternetExplorer4\012 \012\012\012\012\012\012 /* Style Definitions */\012 table.MsoNormalTable\012\011{mso-style-name:"Table Normal";\012\011mso-tstyle-rowband-size:0;\012\011mso-ts ... Hoover Dishwashers

My kenmore ultra wash quiet guard deluxe is having problems. The clean light flashes and the machine will not run, this did happen once before. Unfortunately, I can not find the code that was given to me. It is a sequence of buttons to push can someone please help me?


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. If the clean light flashes 7 times, pauses, and then repeats then\015\012it means the dishwasher doesn't ... Kenmore Dishwashers

Hi, I have a Tecnik TKD/795 dishwasher (not sure which version - its the one with the three black rubber buttons on top). The problem is that the 'ready' button's led light is continuously on green 'on' so I can't change the program select. Also when I close the door to automatically start the cycle - nothing happens ! Please can you help ? Thanks Mr. Arwel Jones


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. This issue can be either due to a\015\012faulty door latch or door lock switch which is not engaging itself. An ... Tecnik 24 in. TKD795/3 Built-in Dishwasher

Hi have a Dishlex Global 450 dishwasher which stops after about 15 minutes into the cycle. The is nothing flashing and no lights it just go off totally. There is water in the bottom of the dishwasher. help please


... Dishwashers

Danby DDW1802W - Dishwasher stopped dead in the middle of wash cycle. Lights are on, but absolutely nothing else is happening. Help, please.


... Danby DDW1802W Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1391 seconds