Having problems with your Zanussi 23 in. ZDT6252 Built-in Dishwasher ?

Zanussi ZDT 6152 Programme 2 LED flashes, and the machine stops.

\015 Hi... I've a ZDT 6525 which halts a minute or so into a wash cycle. The prgramme 2 LED flashed (70 degree) indicating that the filters are blocked. I have cleaned the filters thoroughly, but the fault is persistent. \012\012Does anyone have any other ideas please?\012\012Many thanks....\015

Answers :

Repair Help & Product Troubleshooting for Zanussi 23 in. ZDT6252 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Zanussi ZDT 6152 Programme 2 LED flashes, and the machine stops.


... Zanussi 23 in. ZDT6252 Built-in Dishwasher

I have a Zanussi DE6850 free-standing dishwasher. Have just put on a 65 degree programme. After approximately 1 minute the machine has stopped functioning and the top two lights are flashing and water remains in bottom of machine. There's also a bad dirty water smell from machine now


Hello,\015\012You seem to have a blockage,have you checked the filters lately.Also check the drain hose and the pipe that the drain hose goes into,if they are clear then the blockage is down in the bottom of the dishwasher in the pipes or the d ... Zanussi 24 in. DE6850 Free-standing Dishwasher

My Zanussi diswasher zdt 6053 built in has stopped working I have claened the filter turned it off and on and when the door is closed it clicks shut. The light to show the machine is on comes on but I can't change the programme from the normal one of 65. Please could you advise me on what I might do to fix it! Glenn


... Dishwashers

I have a zanussi tempoline dishwasher, I have loaded this as I usually do, turn the knob to the right and select the 2nd programme the light next to this comes on, I have pressed this to start the machine although it seems as if it is going to start this light flashes and the top arrow on the right of this flashes intermitanly, but the machine does not start the wash programme. The 3hr delay button if I had pressed this by mistake which I am sure I have not would light up. When I found it did no


Hi Ruth.The machine can be in error mode. In this case one or more lights in the control pad will stay on or flash and the cycle will not start.One of the most common fault in your situation, and at start of the cycle is no wa ... Zanussi Dishwashers

I have a Hotpoint Aquarius FDW 20 dishwasher. Prewash and Wash lights were flashing, machine had stopped and water was at the bottom of the machine. What does this indicate? After removing some debris from the water drainage pump, then reassembling the machine, I now get the pre-wash LED flashing and a motor operating, but no futher progress into the wash cycle. What does this mean?


Dishwasher always full of water at the end of cycle ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Hi. IKEA Whirlpool DWFA10 dishwasher.Firstly, when switching on the machine to befin the programme the machine does not pump residual water away.It then begins its cycle (in this case the pre-rinse cycle).After 12 or so minutes,when the cycle finishes and the water should be pumped away,the machine stops and the green warning light keeps flashing 4 times intermitantly.


... Dishwashers

Zanussi aquapulse de 4744 keeps stopping half way through the programme. The programme selection light, drying light and end of programme light are all flashing. Does anyone know what this means?


... Dishwashers

Programme & stop light flashing on Fagor dishwashers and machine bleeps constantly


... Dishwashers

Delonghi trend dishwasher you select programme and it starts and you hear the pump start and expell water and then u hear water going into machine for 10 seconds or so then it stops then programme selected light starts flashing and the dishwasher starts to heat as though it is in the drying part of the cycle


Please provide the full model number of the dishwasher.\015\012\015\012have you tried to turn the power to dishwasher off and back on.\015\012\015\012What program do you start with? Have you tried the rinse only cycle? does it ... Dishwashers

Hello My zanussi diva edw1500 stopped working half way through a wash and there is i30 flashing. According to the manual this is some protection against flooding. I thought it was my external drain was blocked and this was stopping the water from being pumped out of the machine. The drains have now been unblocked but when I tried to resume the dishwasher cycle ther same error appears. Please can you advise? Many thanks. Kind regards Jo


... Zanussi Dishwashers

My 1yo slimline hotpoint dishwasher LST216 has developed a fault when trying to run the 'normal wash': washing stops after a couple of mins, the lights start flashing and the alarm comes on as soon as the water is being drawn into the machine. When I open the door I can hear a whirling/grating motor noise coming from the bottom of the machine. I have cleaned all filters and have run other programmes to check overall functionality and they all work as expected most of the time. I cannot unders


... Hotpoint Dishwashers

I have some problems with a Whirlpool DWF 406 dishwasher: The other day, my wife complained about it not finishing a program (just stopped and started bleeping). I saw a post at this forum where it said to clean out the black grid down my the sump. I did that, and then the dishwasher worked fine a couple of times. Today when I got home from work, the machine just bleeped at me and and the green LED light by the start button flashed 9 times over and over again. Does anyone know what those 9 flash


We have the same problem. The dishwasher is 10 years old. In one of the German forums they said that usually it's because the sieve ahead of the membrane has a fine layer of sludge and the pump cannot pump out the dirty waste water. They said that yo ... Whirlpool Dishwashers

Hi, Zanussi dishwasher DE6344, when starting any program the machine start pumping (draining) for a while and then stops, lights start flashing saying that the draining is faulty. Checked the drainpipe and when adding some water the machine drains it perfectly, still the program won't start. Looks like it thinks there still water inside ? Suggestions ?


... Zanussi 24 in. DE6544 Built-in Dishwasher

Zanussi ZT695 programme starts but machine failing to fill with water. Machine then stops. Help!


... Zanussi ZT485 Built-in Dishwasher

I have a 4yr old Smeg freestanding dishwasher. Model is DF612SDX. The problem is that a wash cycle will start but about 15 mins in it stops and 2 of the programme option lights (on the left hand side of the programme options), start flashing. If you open the machine the soap dispenser has failed to open. This problem has been a bit of a slow deterioration as we've had a number of washed that have managed to finish and then noticed that although the dispenser has opened it must have been to


... Smeg 24 in. DWF612SS Free-standing Dishwasher

Hoover HFI 3015 dishwasher. All 5 Programme select LED's are flashing. Cannot select programme or reset. Machine will not start.


... Dishwashers

Hotpoint Aquarius FDW60 Machine stops halfway through its cycle & the "fast" & "delicate" cycle LED's are flashing - what is my problem?


This sounds like the heater is not energising usually means the heater has failedalthough a blocked or sticking pressure switch will cause the same problem ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Zanussi dishwasher, z t i 6865, 6 years old. when put on, normal beep and noise begins;machine pumps away water, stops too early, never finishes a chosen program ( so no end-beep is heard) and the first 2 lights are on, the first programlight(cold wash) flashes. i have checked main-watersupply, cleansed with soda.Nothing helps sofar, please give instructions soon. ellen.


... Zanussi 24 in. DE6544 Built-in Dishwasher

Fault codes Our machine looks and sounds like it's going to do a full wash then it stops after about a minute and flashes the 1st and 3rd green LED's on and off. Any idea's ??


Could be blocked filter according to instruction book for IDL 730 ... Indesit 24 in. IDL700 Built-In Dishwasher

My Zanussi DE6744 dishwasher won't run it's cycle since I ran a dishwasher cleaner through it. It powers up then stops and flashes 2 green lights alongside a symbol that looks like a bowl with steam rising from it and an arrow with an upright line to it's right. There is also some standing water in the base of the machine. What do these mean.


The first thing I would do is check the float to be sure it is not stuck in the over filled position. Then I would check the drain to be sure that there is nothing clogged in the drain line. Then I would check to make sure the fill valve is working a ... Zanussi 24 in. DE6744 Free-Standing Dishwasher

I have a problem with my Zanussi Aquasave ZT685 Built in, No matter what programme i choose the dishwasher starts off as normal but stops after a few minutes. When i open the door, the light above normal is flashing quickly and there is a pool of water at the bottom, Any Ideas?


Hi There - We have exactly the same problem which you describe, and wondered if you had managed to find a solution. ... Zanussi ZT485 Built-in Dishwasher

Zanussi zd501s machine works on cycle until gets to 20 minutes left and then stops and red light flashes


... Zanussi Dishwashers

Hi i have a Candy CDI 1012/B Intergrated dishwasher and 4 lights are flashing during the first programme then system drains and stops showing four lights lit. We have no instruction manual or service manual this would be good to get hold of as we have serveral of these machines. any idea what the problem is to save us time investigating it. Thanks Paul


Hi. The four leds flashing quickly at start of the cycle means that there is an inlet problem. Check that the inlet hose is not bent, blocked or kinked, ensure that water has sufficient pressure. The inlet valve can be tested reading Ohms at valve te ... Dishwashers

We have a Zanussi ZIDW 956 built in dishwasher. Problem is hat it gets a short way into the program and then stops and then a light at the top is flashing ''A''. Cant see any blockage. Machine is regularly cleaned. Can you help Ben


Hi\015\012 \015\012If you have checked the drain hose and there is no blockage, and assuming that you have also checked the water inlet valve for any blockages. The issue can be with the door switch that is bad or the c ... Dishwashers

I have a Zanussi Electrolux Jetsystem Progress ZSF 6161 Dishwasher which, no matter what programme I use, stops after 2 seconds and a -10 flashes.


I have a Zanussi Jetsystem Progress ZSF 6161 Dishwasher stops after a few seconds and flashes -30 Any ideas? thanks! ... Zanussi Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0987 seconds