Having problems with your Zanussi Dishwashers ?

Zanussi ZSF2450 has the pump running but the front panel has switched off - booklet says contact service centre anyone know what is wrong?

\015 Front panel not working but pump is still running\015

Answers :

The flood switch has tripped, this is either due to water in the base of the dishwasher or a faulty flood switch.
Repair Help & Product Troubleshooting for Zanussi Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Zanussi ZSF2450 has the pump running but the front panel has switched off - booklet says contact service centre anyone know what is wrong?


The flood switch has tripped, this is either due to water in the base of the dishwasher or a faulty flood switch. ... Zanussi Dishwashers

Hi, I have Dishlex DX 301 and it comes up with fault code 30 several seconds after starting. The manual says The anti flood device operates and to contact Customer care centre. I know something needs cleaning somewhere but where? I am handy with tools!


Hi,\015\012 \015\012Error code 30 means flood switch in base has activated due to water on lower tray. Find out where the water is leaking from, repair the leak. Dry off the lower tray & fault code will ... Dishwashers

AL3 Some way into the dishwashing programme the display indicates a programme identified as AL3. Does anyone know what the problem is? All the manual gives is a suggested solution - contacting a service agent.


... AEG 18 in. Favorit 64800 Free-standing Dishwasher

I actually don't know what type of Bosch I have. I know that is a problem, but maybe you can still help. It has a simple panel that says: Pot Scrubber, regular wash, quick wash, rinse and hold. When I turn on quick wash, sometimes it says 38 min. 45 min. 56 min. We want to keep it at 38 minutes and we don't know why it varies. If we have to open it mid-cycle, it switches to a higher cycle time. How do we set it for 38?


On a Bosch dw, it has a light sensor to sense soil in the water.. if the control feels that the water going through the sensor is not clean/ or clean it will add or minus time..one thing you can do is make sure that your drain line from dw to sink dr ... Bosch 24 in. SHU43 Built-in Dishwasher

I put dish soap in my thermador dishwasher on accident. It is now saying e15. The thermador customer service says a safety switch turned on and a technician needs to come out. Can I just flip the switch?


... Dishwashers

Whom should i contact for service? I need my hob and chimney to be serviced and sliding switch in chimney is not working. where do i get the spares? Need a solution very badly


... Baumatic 18 in. BHD45 Slim-Line Built-in Dishwasher

Hi I have an hinari dishwasher model HDW41SL its about 5 years old it kept blowing the trip switch when I used it. I contact a local maintenance engineer that I use and he said the heater has gone. He has been looking on line and contacting his supplies but no one can supply one. Please do you know where I could get one. Thanking you. Estelle


... Dishwashers

Have a Hobart am 14 ? Service guy sent in a magnet (pt.# 96552450) and a switch (pt# 436071) The switch does not match what is in the machine. What is wrong with this set up?


Call them back! \015\012I assume that he sent you the parts for the new version door switch assembly or He used the wrong ML# when looking up the parts. The ML# is the material list they used for each version of the machine over the years. When ... Hobart 42 in. AM14C-154 Free-standing Dishwasher

Flood switch This DW is a Kitchen Aid version of a Fisher & Paykel. Both drawer rinse lights stay on, the drain pump stays on. Book says the flood switch is activated. Is this somthing that a homeowner can fix or am I required to call for service?


I had the same problem and I fixed mine. It wasn't hard at all. First, make sure power is off either unplug or shut off breaker. Next, open the lower drawer and on the sides toward the bottom you will see a circular recessed pin with a flat slot. Wit ... KitchenAid 23 in. KUDD01DPPA Stainless Steel Dishwasher

Door switch Anyone know how to determine if a door switch on a dishwasher needs replacing?


Youd have to open the control panel and OHM out the switch with a mater to ck if it functions properly, however upon open panel its sometimes obvious that a switch would need replacing( for instance ... Maytag 24 in. MDBH950AWS Built-in Dishwasher

Burning smell from our Dishwasher. I opened it up and found a little square brown thing attached to the motor - It has a terminal at one end that a white with a coloured stripe cable attaches to via a slip on terminal and 2 terminals to slot the little unit directly into the motor. Anyway, this little unit has obviously burnt out and this is the problem. Except my problem is that I dont know what this little unit is, so dont know what to ask for at the spare parts centre. Can anyone identify


... Bosch 24 in. SGS45E02 / SGS45E08 Exxcel Free-standing Dishwasher

I have a Whirlpool Gold (Quite Partner) Dishwasher that is about 9 years old. I was using a liquid gel Dishwasher liquid and it has been working fine. After I switched to a Cascade Action Pads (solid powder pallets), its detergent dispenser did not open during the wash cycle. I cleaned the dispenser and switched back to liquid gel. Now the detergent dispenser (that looks clean and fine otherwise) has stopped opening during the wash cycle. What's wrong and what can be done? I can be contacted


As well as controlling cycle times, the \015\012timer on many dishwashers also functions as an actuator for the \015\012spring-loaded dispenser door. At a certain specific time during the \015\012cycle, the timer will activate a lever that in turn op ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

I am looking for an F&P DD60DCX6 service manual which covers the service codes in diagnostic mode, to enable ON/OFF switching of individual components. I already know how to safely enter diagnostic mode


Here the service manual. ... Dishwashers

My GE Potscrubber Dishwasher will turn on but when I rotate the dial to "start" it sounds like it is trying to run its cycle BUT nothing happens does anyone know whats wrong and how to fix this??


... GE 24 in. GSD2230Z Built-in Dishwasher

Just purchased a new Beko DFN1000X One Touch dishwasher. Plumbed in, switched on - starts up then says Call Service on LED panel? I have poured 1Ltr of water into salt dispenser as instructed.


... Dishwashers

"F1" Flashing on Control Panel on my Fisher Paykel Dish drawer DS603. User manual says Flood switch has been activated and to call Authorized Service. Can I fix it instead myself? If so, how?


Thanks - your expert pointed me in the right direction. Never found a leak, but I dried up the water in the tray, which may have been from condensation, and dishwasher seems to work fine now. ... Fisher and Paykel Dishwashers

Trips power when it is turned on at the on/off switch. There is a little bit of water on the baseplate so obviously a leak but i can't see it. Anyone know of common leak points on these machines ? Thanks Steve


Go to the Hotpoint website - there is a trouble shooting section. Failing that find the customer service number on the website and ask if there is anything you can do to solve the problem yourself before paying for a service call. I would alway opt ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

My Karcher (K2.26M) pressure washer is leaking water from the ON/OFF switch and the bottom. Does anyone know what could have broken, and what part I would need to fix it?


I have had a dozen of these units, My advice is not to bother trying to get parts or fix it. Its designed to be a throw away unit! ... Karcher K2.26 Electric Power Washer

We have a leak on the pump around the manafold and the gearbox. Has anyone had this problem that you know of? Could it be that the packing has gone out? The washer is 2 to 3 years old and runs great just need to repair this problem to put it back into service.


Usually when water is leaking from in between the manifold and the oil side of the pump, the high and low pressure seals (a.k.a. packings) are worn out. ... Northstar Pressure Washer 3000 PSI

My Whirlpool is only a couple of years old too and it does the same thing. It stays on the wash cycle and the timer stays at 79 minutes. I have to cancel the wash to get it to stop and drain. Anyone know what is wrong with it?


If the timer does not advance. It is most likely a timer motor. ... Whirlpool 24 in. DU1050SS Built-in Dishwasher

Help i have a smeg dishwasher, which until recently has been perfect,it seems to be stuck on its cycle and is making all the noises of working, but nothing is happening, then the panel says E 1. any ideas what is wrong and what can i do? thanks to anyone that can help


We have a Smeg SA8605W which has had a similar problem 3 times in its short 3 month life. The problem with ours is that the control panel on the front pushes against a very brittle plastic frame to activate the micro switches. Because of the brittle ... Smeg CSU2001 Built-in Dishwasher

Maytag MDBTT79AWW dishwasher fills and nothing else. Once filled you hear a click, followed by a humming sound for 3-5 seconds, then silence. This will happen two or three more times, and then unit will shut off. Motor doesn't start. Repairman says he thinks control board is bad, but he sounds like he is guessing. I performed a field service test , which indicated a fault in the high current motor circuit. Unit is seven years old. Don't know whether to attempt repair, or replace.


That sounds like the motor trying to start but being jammed it is shutting off via an internal breaker. Check for something in the bootom of dishwasher that might have gotten down there that could do this. You might have to take the sprayer off and s ... Dishwashers

My Whirlpool Dishwasher's clean light is blinking and it won't start. Is this a common problem? My book's troubleshooting guide says when this happens to contact a service tech to check the heat element. Is that a difficult repair best left to a tech? Thanks, Brian


... Dishwashers

Setting the water hardness system on Beko DWD 4310W. The handbook instructions seem to be wrong. There's no display panel on the machine as it states, and it tells you to press and hold Start/Stop button and switch the On/Off button, release the On/Off button, press and hold Start/Stop button for 10 seconds,( which you are still pressing anyway!) Then it says the last setting will be displayed on the panel for five seconds. But no panel.Totally confusing.


... Dishwashers

My asko d1876 is half way through it's cycle and is flashing f2. Manual says high water level, contact asko. I did but they want to charge and arm and a leg to come out and service it


My husband unclogged the drainage pipe so the water level could go back to normal. ... Asko D1876 Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1012 seconds