Having problems with your Zanussi Dishwashers ?
SMEG DD612SCA7 end of programme buttons flashing
\015 Its not a Zanussi but a smeg dd612sca. Tried to set off a wash programme but both end programme buttons are flashing. Door seems not to close properly although it latches and to open you need to press the handle in to unlatch it.\015
Repair Help & Product Troubleshooting for Zanussi Dishwashers
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
SMEG DD612SCA7 end of programme buttons flashing
... Zanussi Dishwashers
End programme buttons flashing & cannot select any other programme
... Zanussi 24 in. DE6744S Free-standing Dishwasher
Whirlpool Dishwasher ADP 2652 WH at the end of a clean cycle, the pre rinse button remanins on, the "end" light flashes constantly and the on/off button flashes 4 times in a repeating manner.
... Whirlpool Dishwashers
I have a DWI 612C Smeg dishwasher I have an error code of the 2 right hand LED's flashing Have tried to reset the programmer (turn off, on then press program 4 times in 2 secs, wait 15 secs and turn off) This enables me to select a programme, but when the programme starts, after five mins it beeps and carries on making the draining pump noise and the programme never starts When I turn it off and back on I get the far 2 red lights flashing again Have looked for signs of blockages and can
... Smeg 24 in. DWI612 Built-in Dishwasher
On my whirlpool ADP962 dishwasher the start light is flashing but nothing is working. I can change the programme type (ie rinse, wash etc) but the programme will not start. I can't select either half load or a time delay. By holding the start button it will start the pump but when this stops it goes back to a flashing start light. The programme progress lights are not lit. What is this telling me and how can I reset it?
... Whirlpool Dishwashers
The machine stops before the program has finished, with the start button flashing. Holding down the button restarts the motor but it stops after 5-6 mins with the same flashing button. Therefore I can never get to the end of the program.
Check levels of Salt and Rinse Aid. Make sure there is no "hold" button depressed.\015\012From the sound of it, this is a fault indicator that something major is wrong. Is it heating correctly ?. Does it pump out ok ?\015\012I suspect eit ... Dishwashers
Whirlpool dwh b10.yesterday had problem with water not going anywhere,had to bail it out.today cleaned all filters,now can hear pump working but doesnt appear to be taking water in.i press start button for two seconds,re-programme,and it does the above.then start button flashes and there is a continual beep the programme indicator changes from a wash to rinse during this process.any help ? thanks pete.
... Whirlpool 24 in. DU1148XTP Built-in Dishwasher
I have a zanussi tempoline dishwasher, I have loaded this as I usually do, turn the knob to the right and select the 2nd programme the light next to this comes on, I have pressed this to start the machine although it seems as if it is going to start this light flashes and the top arrow on the right of this flashes intermitanly, but the machine does not start the wash programme. The 3hr delay button if I had pressed this by mistake which I am sure I have not would light up. When I found it did no
Hi Ruth.The machine can be in error mode. In this case one or more lights in the control pad will stay on or flash and the cycle will not start.One of the most common fault in your situation, and at start of the cycle is no wa ... Zanussi Dishwashers
Pump is constantly running - trying to pump out water, although there is no water in the tank. This condition remains the same AT EITHER AND ANY reset positions of buttons ABC or programme buttons. Programme END indicator is NOT lit, LOW SALT indicator lamp is ON, LOW RINSE-AID indicator lamp is ON. No apparent blockages. Supply water water is on and free flow.
Hello, welcome to FixYa.\015\012\015\012Based on your description it sounds like the emergency overfill switch has been actuated.\015\012\015\012Here`s what to do and what to look for. ( unbeknownst to many this is built by B/ ... Neff 24 in. S5543X2 Built-in Dishwasher
Smeg Dishwasher Hello I have a smeg dishwasher - built in, push button. It has stopped working - the program start and you hear it drain but that's as far as it gets, no water appears to be getting in. A couple of times the last 2 program buttons flash or the rinse light is on when we open it. let me know if you have any thoughts on this - I'd really appreciate it. thanks Diane
Replace the timer/control board ... Dishwashers
Hi, We have a Smeg ST 663 dishwasher that does work. However, sometimes when you want to use it and turn the power button on it beeps twice with the red light flashing and you can't get it to work or change the settings. Sometimes if we leave it for a while and try it again later it will work, but it is annoying as sometimes it won't want to work for ages and we really want our dishes cleaned! The dishwasher doesn't have many buttons on it (a power button, cycle selection button and 1/2 load
Hi,\015\012\015\012Turn machine on and press and hold the programme select button till the light goes out about 5-7 seconds see if this resets it if it does start a cycle and see what happens.Otherwise the pcb as its not responding to an ... Smeg Dishwashers
Matsui MF160 integrated dishwasher: Had problems for a while now with the buttons on the control panel ie: on button needed to be pressed down hard for it to connect and sometimes the wash cycle programme buttons would just keep flashing between the three of them and then they would settle down, for the past few days the on button light has stayed on and wont go off and now all the lights on the control panel have gone off and the dishwasher wont work at all, we have tried dis-connecting it, che
I have the double drawer dishwasher. It is 3 years old. For about 1 year now one of the programmes - the second one along which is for quite dirty crockery and cutlery (programme is about 99 minutes) - STOPS after about 60 minutes. It bleeps and flashes and the pot wash programme and eco button are on when I open the drawer. Sometimes the programme works right through. No pattern or consistency. Also the dishwasher isn't cleaning terribly well. I've checked the filters as much as I can an
A few things you could do.\015\012\015\012Is this happening with both drawers.\015\012\015\012Take a clean damp cloth and wipe the switches and the inside panel.\015\012\015\012Get a couple of Finish dishwasher cle ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher
Zanussi aquapulse de 4744 keeps stopping half way through the programme. The programme selection light, drying light and end of programme light are all flashing. Does anyone know what this means?
My smeg dwi 710 dishwasher keeps flashing on the diplay panel and won't change to another wash selection. it wont close and wont start. the light is stuck on the heaviest wash selection and just keeps flashing on and off and on and off. i have tried turning it off, keeping buttons held down and nothing seems to work. there is nothing in the manual that says what the flashing means so i dont know how to fix it.
... Smeg Dishwashers
Nordmende dish washer model no. DWSN60WH . when power button is switched on machine gives a buzzing noise for about 10 seconds while the start button is still lighting. Noise stops and light goes off and then wash and end buttons start flashing continuely.
Hello, I have a Bosch SGS43A42UK dishwasher with a problem in that the cycle does not seem to end - it seems like the dishwasher is still trying to remove water long after it has been extracted. I pressed both buttons together and the *End* light flashed and then the cycle ended. Help, please?
... Bosch Dishwashers
I have a Kenmore dishwasher model 66574362K2. It has worked fine until tonight. I opened the door before the end of a cycle, closed the door, and pushed the cancel drain button. There was still water in the bottom but the dishes were basicly finished. Now I can not seem to get the dishwasher to come back on. The lock button seems to be on and it usually is not on. The manual says to push and hold the button for 4 seconds to turn it off. I did that. But now it is flashing between the Heate
Can you press the drain button to drain the water, then shut the unit off and restart??? I have exhausted all my resources to help, thought this may work. ... Kenmore Dishwashers
Smeg df612sdx dish washer - 'P' programme button not working
... Electrolux Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher
HI my brandt dishwater stopped working. It starts initially then beeps and stops and the control panel flashes and end button flashes too. Any ideas what to do? Thanks in advance for you help. kind regards, eileen :-)
Hi\015\012\015\012 \015\012\015\012Please check the drain hose for any clogs and clean the\015\012drain hose drain pump filter for any clogs obstructions. After this is done\015\012verify that the drain pump is working and there ... Dishwashers
KITCHENAID KUDSO3FTSSO DISHWASHER WILL NOT COMPLETE CYCLE. STOPS NEAR END OF CYCLE AND THE START/RESUME BUTTON FLASHES. YOU HAVE TO MANUALLY HIT THE START/RESUME BUTTON TO COMPLETE CYCLE.
Https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a4 ... KitchenAid Dishwashers
I have a KDW 243 A dishwsher. It was opened before the end of the cycle, and I cannot re-set it. Befor ethis, it was working fine. Whatever I do, the drain pump runs as soon as the power button is pressed, and the programme button does not operate.
Hi\015\012\015\012\015\012\015\012\015\012\015\012Thanks for using FixYa. This\015\012issue can be either due to a faulty door latch or door lock switch which is not\015\012engaging itself. And, if the door latch will not engage the ... Dishwashers
Hotpoint BC145 Dishwasher not cleaning starts to kick in but then just sticks on the "R" light flashing and cannot reset even after turning off. Itbeeps when pressing the select button sound weaker and shorter than they used to and the light does not move from the "R". On a couple of times I have tried it has reset and then the dishwasher starts but after about 3 minutes there is a low beep(not the usual beep when a programme finishes) and the washer stops and the light is flashing on the "R" ag
... Hotpoint 18 in. BCI45 Slim-Line Built-in Dishwasher
My brandt VF300 doesn't drain at the end of wash cycles. If you run the soak programme it drains fine. Some time ago the door was adjusted by an engineer, when he arrived he pressed some buttons which then drained the unit immediately, I have forgotten which buttons! Is there anything I can do to reset the thing, given it drains on soak I am doubtful the drain pump has broken ir is blocked?
Hey, I have an 18 inch free standing SMEG dishwasher that has stopped working. The power and water feeds are fine. None of the cycle buttons are lit up or responsive, however two buttons next to each other are. They are not flashing just permanantly on. Lauren