Having problems with your 301htm24kw ?

temperature guage is not working

the temprature gauge is not resigner indicating when dish washer is working

Answers :

Repair Help & Product Troubleshooting for 301htm24kw

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Ecomax chf40 will not work temperature guage flashing 55 left 85 right then 5 left Et right how do i reset


\015\012Hi, error 5 on a Hobart Ecomax CHF40 relates to a faulty thermostat, it isn't a common or generic problem with this model, i have found them to be very reliable, its possible the probe has scaled up which may have caused the problem. i can ... Hobart Dishwashers

Need help my oven is not working, the self cleaning works fine, the broiler also works, but the oven will not heat. what can i do? Our Kenmore gas range will not heat to the proper temp. The oven ready beeper goes off in about 3 minutes and displays 350 which the internal temperature is not. There also seems to be excess heat coming from the vents under the top of the stove, (under the timer, clock etc.). This could be something I just never noticed.


Hi, The ignitor is not working right and is going bad....have the repair man replace the ignitor, or DIY....Check out this tip about your problem...Oven not Working or ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

Hobart AM14/1 free standing dishwasher with booster. Booster will not heat up beyond 41C. All three heating elements check ok with Ohm meter. High limit not tripped. Temperature screw up at maximum, when you turn the screw, you can hear thermostat click at lower temperature on and off. When turning on main power for dishwasher, heater in dishwasher works fine, but no relays click in the booster tank area. Have not checked for power at booster, have checked all fuses with meter and are ok. Ple


... Hobart AM14-253 Free-standing Dishwasher

Kenmore Elite Stainless Steel 24 inch tall Model 66577963K701. The heating element works for "heated dry" but not for "Hi Temperature" wash. It used to do so and when I opened the door a nice blast of steam would come out. My hot water tank is a great distance from the washer so we usually run the hot water tap in the sink for a bit until hot water comes... but the heating coil no longer kicks in on any of the cycles (Smart Wash / Normal Wash ). The high limit switch works and as I said, th


... Kenmore Dishwashers

My dishwasher is only 2 years old. My small coffee shop is in an area where we have large quantities of lime. At this point in time the repair people have been out two times and this is not fixed. There appears to be no water being pumped into the dishwasher where it will be heated prior to washing. Also the temp gauge is not working all the time. With no water entering, the small amount of water in there is rising in temperature quickly if the gauge is working. The technician that have be


... Champion Dishwashers

Brandt dishwasher my dishwasher has stopped working AGAIN!!! everytime i call a repair man out they say the temperature re-set needs doing and they fiddle about under the machine, its a built in dishwasher so they take the plinth out underneath, have a fiddle and hey presto it works but i am sick of paying 65 quid for the privilege, i hv asked them what to do but they obviously wont tell me, can you help???


The lights on my dishwasher are working but It doesn't do anything when I hit start. ... Dishwashers

I am working with a Hobart C44A diswasher with a 15KW water basin heater and a Hobart bosster heater. What is the minimum water temperature I can supply to the dishwasher and maintain 160 rinse temperature required?


Hi,140F min water entering temp.http://www.instawares.com/Prod_PDF/HOB-C44A263.pdfheatman101 ... Hobart AM14-253 Free-standing Dishwasher

My lower rack will not clean bowls or cups and I have to be very careful how I place plates. The serviceman has been out twice and I have run vinegar through multiple times with no improvement. My top rack is working fine. I have tried running it on different settings and we have verified that the lower wash arm seems to be spinning. The temperature seems to be fine. Even glasses placed on the lower rack that weren't very dirty seem to have a scum in them when finished. Any ideas?


Hi, \012I have an older dishwasher also and recently my wife alsocomplained about it not cleaning right... so me being the man I am tried invain to clean the things... Bought new spray arms online and installed them inminutes...now the thing works li ... Dishwashers

Pressure Washer I have a Porter Cable pressure model no.PCH2401.It works fine for 5 minutes,then I can hear the motor loading down and then it stalls out. I tried to start it and it was very hard to pull on. disconnected the water supply and if was very easy to pull and started right up. I noticed the pump was very hot.This unit has a thermal relief valve on it,shouldn't it have released when it gets to a certain temperature .I was thinking maybe this is why it might be shutting the motor


Any leaks from connection at pump to gun and wand assembly if so the valve is detecting leakage and open up again without u squeezing trigger it builds up in the head.if your trigger gun is leaking internally then you will need to replace the gun thi ... Pressure Washers

I bought the unit almost a year ago -my warranty is not up yet- but i can't get it work properly. Dos not matter what i put in it or how it always comes out spotty or greasy or food particle dried on the dishes. I checked the water temperature, the soap , tried different make, quantity, texture nothing helps. I gave up using it but i would like to find out what to do before the warranty is up. !!?? Model: Maytag dishwasher MDB 5601 AWBO NW 4212949


The problem is hard water. There is a new product out called the dishwasher filtration system. It filters the water before it enters your dishwasher. It works amazing and has a money back guarantee. You will love the ... Maytag 24 in. MDB5651A Built-in Dishwasher

Temperature control does not work


... Whirlpool Dishwashers

Yes I have a whirlpool DU1345XTVB1 dishwasher. Just got in July. After each wash cycle the dishes are not dry. I have been using Finish gelpacs w/jetdry & also have a off brand drying agent in reservior to help dry dishes. The water temperature is set pretty hot & washer is draining good. I have tried checking wash cycle a few minutes into 1st cycle to see if water is in filling & heating. Didn't know if maybe heating element going out or thermostat not working? Thank you for your time.


<span style="FONT-FAMILY: 'Trebuchet MS'; FONT-SIZE: 10pt; mso-ansi-language: EN" lang="EN">Hi,<br />Check your heating element.. </span><br />\015\012<span style="FONT-FAMILY: 'Trebuchet MS'; FONT-SIZE: 10pt; mso-ansi-lang ... Whirlpool 24 in. DU1050SS Built-in Dishwasher

We bought the dishwasher about four years ago. It worked good until recently. It is now leaving a hard gray film on the glass ware. We tried increasing the water temperature without any change. What could be the problem?


... Kenmore 13869 / 13864 / 13862 Dishwasher

We have a new Electrolux EWDW6505GSO dishwasher. It is not cleaning properly. We have increased house water temperature, run hot water before use, made sure detergent was shaken and not old, and nothing has worked. Any other ideas?


Is it not cleaning properly from the day it was installed or is it just started doing that recently?\015\012\015\012Please provide some information on what things happen to the dishes. Does the dishwasher fully drain out at the end of the ... Electrolux EWDW6505GS Fully Integrated Dishwasher with 9 Wash Cycles, Nylon Racks, Wave-Touch Contro... 24 in. Built-in Dishwasher

I have an andi dishwasher that was working well but now won't heat the water to adequate temperature to clean dishes.


... Dishwashers

We have a very new kenmore dishwasher. Dishes on the top rack are not rinsing completely with some small granular deposits being left on glasses and bowls. The water temperature is very hot and the cycles seem to work very well. I can get the model number if you like - but don't have it at the moment.


... Kenmore Dishwashers

I have a KitchenAid KDS-17E dishwasher, which has worked well since I acquired it second-hand in 1984. Last night it ran continuously, stuck in the prewash part of fullcycle, with water being pumped through the system, and was fairly warm in the morning. It drained normally when I pressed the Cancel/drain button. I tried the machine again in full cycle. After 20 minutes it was still stuck in prewash, with the water temperature about 42 C, so I stopped it. Machine is connected to cold wate


Your problem is a bad timer.and you really got your moneys worth on this dishwasher.The timers useally go much soon than this one 7-8 years is the norm.The timer gets stuck in one position is a good sign its loseing its ability to fuction normally, ... Dishwashers

Oven and control panel not working - Jenn-Air Jenn Air D156, D156B Replacement Oven Temperature Sensor Kit


... Jenn-Air Jenn Air D156, D156B Replacement Oven Temperature Sensor Kit

Lamona HJA8630 Salt light and temperature options are lit but will not start. Programme switch has been pressed but still not working


... Dishwashers

The heating is not working at all on my fujitsu air conditioner


Should have an heating element inside...that one I think is broken or can be also the thermostat.. ... Dishwashers

I have a Triton Aspirante Topaz shower which I purchased 2 years ago. Just recently it has started to give me a problem. With the temperature control set normally to 43 the shower goes through its pre


... Dishwashers

My Hobart AM-14 is displaying a water temperature of 255 degrees but it is not heating the water. I believe the heating elements are good. I don't want to replace the circuit board if the problem


The thermistor in your float and probe assembly or it's associated wiring is shorted. ... Hobart 41 in. AM14-255 Free-standing Dishwasher

Viking professional dishwasher DFUD142 panel lights flashing, and cannot turn of pump, need to cut power, will not go on? worked perfectly 4 yrs. what to do? repair man did not fix.


... Viking DFUD142 Built-in Dishwasher

Bosch Classix SGS43C12 dishwasher programs not working & dispenser drawer not opening


The control board on this model is know to have issues with dry solder joints, If you are handy with a soldering iron you can fix it quite easily. ... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

Hobart lx 30 dish washer does not heat up to temperature


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0815 seconds