Having problems with your Dishwashers ?

Miele dishwasher G2870 scm. There is an F14 fault. I have cleaned the arms removed the waste basket from the bottom of the dishwasher and removed the two parts one with the large metal ball to expose the plastic wheel clog. There does not appear to be a blockage. I also removed the top arm and cleaned that out. I don't know what other inlets to check as the guide does not tell me exactly what an F14 fault is but explains F11,12,13. Can you help?


Answers :

F14 on your model of dishwasher is indicating a blockage, poor water\015\012pressure or could be a fault with the pump pressure level switch or\015\012circulation pump.

Filter and non return valve is cleaned of any blockages and if the fault persists have it service..

hope this help.
Please be advised that F14 on your model of dishwasher is indicating a\015\012blockage, poor water pressure or could be a fault with the pump\015\012pressure level switch or circulation pump.

Usually the pump is the thing that needs to be replaced. Since you think that it might have been clogged, if the water wasn't draining and there was no clog then the logical thing would be the pump.

If you replace the pump, then I think you will have solved your problem.

Good Luck with this

Please let me know if you have any further questions otherwise, Thank you for using Fixya

Please don't forget to rate my solution since this is one of the biggest aspects of this website, have a good day.
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Miele dishwasher G2870 scm. There is an F14 fault. I have cleaned the arms removed the waste basket from the bottom of the dishwasher and removed the two parts one with the large metal ball to expose the plastic wheel clog. There does not appear to be a blockage. I also removed the top arm and cleaned that out. I don't know what other inlets to check as the guide does not tell me exactly what an F14 fault is but explains F11,12,13. Can you help?


F14 on your model of dishwasher is indicating a blockage, poor water\015\012pressure or could be a fault with the pump pressure level switch or\015\012circulation pump.Filter and non return valve is cleaned of any blockages and if the fau ... Dishwashers

My tappan dishwasher is only 1 1/2 yr old and its not getting at least 1/2 of dishes clean. We have tried everything from changing to liquid soap, increasing water pressure at meter, not using while washing clothes. We used a dishwasher cleaner to remove calcium, and run hot water in sink before using. We know the wand, pump and drain are working. It is model TDB210RFB5 with 1.1A motor. Is the motor too small to clean dishes? I wish I could get my money back or exchange for an upgrade. Thanks!


... Electrolux Dishwashers

I have Frigidaire model FDB130RGS3. This seems like a pretty cheap dishwasher that is provided by my management company. This is third dishwasher I've had in this apartment. The others have all broken. Now this one, which is less than 6 months old, seems to have broken. It does not clean the dishes. I removed the round plastic cover in the base of the dishwasher and the bottom of the dishwasher (sorry don't know how else to describe this) is filled with dirty water. I drained the water and tried


Hi,\015\012\015\012the round plastic cover in the base should just push back on, but you need to make sure it is correctly rotated before doing so. It should look like this:\015\012\015\012\015\012 ... Frigidaire FDB130 Built-in Dishwasher

Dont know how to clean the dishwasher


Go to the dishwashers brand site,click help for your solution. ... Baumatic 23 in. BDW13 Built-in Dishwasher

Hotpoint Auqarius dishwasher. I have resentley moved house and reconnected the machine. it works through programme fine but is sometimes leaving dishes gritty and not quite clean. I have cleaned filters, arms etc dont know what else to do?


It sounds like there could be a gritty deposit in the bottom of the system. At the start of the cycle the unit takes in a set amount of water and recycles it around to the drying phase.\015\012\015\012Try and run the diswasher a few time ... Dishwashers

My dishwasher was not using the soap 100% and not cleaning as good as it shoud. I took the middle section apart and cleaned it from debri but now it does not shift to dry. I dont know if I put the pieces in correctly


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Frigidaire 24 in. FDB1050RE Built-in Dishwasher

Dishwasher fdw60g fault lights i have the eco and prewash light flashing. i know that this means the filter is blocked. i have cleaned the filters and checked the hoses for blockages and they are all clear and kink free. i have tipped the machine on its side and checked the pump , which is clear aswel. i dont know what to try next to get the machine working and the lights to stop. thanks


... Dishwashers

Smeg dishwasher leaking through the door ive removed the lower door seal but dont know how it should go on happened all of a sudden and there was a desert spoon in the bottom of the dishwasher . im hoping it leaked because it dislodged the seal the seal came out easily from the outside of the dishwaser. can any one tell me how to replace it and which way it is supposed to sit model number sa425 smeg


... Dishwashers

Constipation type adg 9434/3 My dishwasher is blocked, and I do not know how to unclog it. I have already cleaned the filter and remove large pieces underneath. then I do not know what to do. can you help me?


Can you check the exhaust water hose by looking straight down the drain in the sink where a dishwasher exhaust hose is normally attached, to see if you have any water leaving the dishwasher at all? Can you remove the exhaust hose, and put in a pan t ... Whirlpool Dishwashers

Top arm does not turn in most of gibson amana an frigidaire this is done by ball in bottom of pump .it is clean.spray arm are clean .bottom arm move all the time.timer works it hesitates every so often and so ball will move an water should go up to upper arm but doesnt.common problem on these units but dont know how to cure?change ball.didnt work..on one unit changed pump cure problem for 4 months then returned....also does anyone know were u can buy the plastic they used to sell for dishwashers


Can yo give me the make and model number sol I can look at the service manual for you? ... Dishwashers

Just looking for some advice on removing the drawer from my servis washing machine, sorry I dont know what model it is. I need to clean the powder drawer but cant find any way to remove it from the machine. There is no internal part marked push that i can see and im wondering if i need to unscrew the four screws around the drawer. Help please! Cheers


Send an email to this address asking for the user guide for your model \015\012\015\[email protected] ... Servis Dishwashers

I have a frigidaire dishwasher - model number PLDB998AC1. There are two spray arms in this dishwasher - lower and upper. The lower works fine but the upper spray arms are not spinning. There is what I think adequate water pressure coming in from the top but no movement on the upper spray arm. Here is what I know: 1) The water pressure and spray arms alternate between top and bottom. 2) The upper spray arm moves freely when I push it gently. 3) I have removed the pump and cleaned out an


... Frigidaire 24 in. GLD2162RDC Stainless Steel Built-in Dishwasher

Bosch dishwasher SHX46A05UC/40 is making noise when draining. I have cleaned the screen and hose back to the drain and removed all debris. So it seem to be the 'drain pump'. But replacing it - now that seem complex - is it? Looks like I would have to stand the DW on its head and remove the base and then replace the pump. Anyone know if I am on the right track? Could it be something else?


... Dishwashers

Spots! i have problems with spots drying onto all my clean dishes. is there a solution for this? its a brand new dishwasher, so i dont know why this problem is occuring. please help


The problem is hard water and jet dry may help but wont solve the problem. www.dishwasherfilter.com has a great product out that filters the water going into your dishwashe ... Dishwashers

Our Neff dishwasher is blocked, we have looked at the back of it and can see the blockage but dont know how to remove it


Time to get down and dirty get a WIRE HANGER unwrap that bad boy and watch him work use that to remove any blockages also works for those stubborn sink drains as well ... Neff 24 in. S5456 Built-in Dishwasher

Bosch SHE56C05UC dishwasher. My Bosch ON/OFF switch is very difficult to depress. I have to push it so hard I know I will eventually break it. I removed the control panel and tried to clean it but to no avail. I want to find out how to fix it. If I have to buy a new control panel just don't tell me and don't charge me. Fair enough?


I believe you can get the on/off switch separately for this model. \015\012Appears to be moderately priced. Hope ... Dishwashers

Its a whirlpool dishwasher washed dishes last night dishes were clean but rinse water was still in the tub now no lights come on the touch controls its like its dead, i checked power and got it to the circut board but dont know how to check any thing else


Hi.... you have a Bi-metal bad .. It has opened You can by-pass it by using one wire and I bet it lights up ... dont leave it by-pass..... The bi-metal is right on the main board ... Dishwashers

I have a Bosch dishwasher (SHE46C06UC/46) and this is the third time it has plugged up and flooded my floor. I don't clean the dishes before putting them into the washer, but I don't load it up with big garbage either. I need to know how to figure out where the clog is and fix it. I can't easily remove the washer from the cabinet.


... Bosch Dishwashers

During power scrub cycle which is the one we use most of the time the dishwasher stays at one minute fot a long time. the dishes come out clean and it finally does finish cycle just dont know why it takes so long on last minute of cycle for so long


It's just heating the water more ... Bosch 24 in. SHU43 Built-in Dishwasher

Dishwasher 5 years old and not cleaning dishes properly leaving food stains on plates and cups. No evidence of any mechanical problem. thoroughly cleansed using Finish Cleaner - dont know what else to do


Try clr in it worked for mine ... AEG 24 in. Favorit 40660i Built-in Dishwasher

Dishes are not being cleaned properly.More than normal amount of water in drain and I dont know how to remove the lower drain cover.


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. Check the water temperature inside the dishwasher to\015\012measure the water temp. It should be a ... Viking 24 in. Professional Series VUD141 (Ultra-Premium) Built-in Dishwasher

My dishwasher is not draining. i have inspected and cleaned what I can. the drain tube into my plumbing/and my plumbing is not restricted. i dont know if the psi pump is the same as the drain pump ,but I have lots of pressure while the washer is running.


Hello there:\015\012 The water doesn't drain from the machine \015\012\011 \015\012 ... Whirlpool GU2400XTP Built-in Dishwasher

Hi - I have tried all the usual tricks of running an empty load with vinegar, and the food particle filter seems to be the kind that isn't removable. Whenever I run a load, there is enough left over particles on the dishes - especially the top shelf, that I either have to wash all the glasses by hand, or run at least one more cycle. I have a standard size hotpoint built-in dishwasher. Please let me know if there is a way to clean the filter, or an alternative method so that the dishes are a


The best but not the fastest way is to remove the pump and motor assy and visuall inspect for fooreign items in the pump assy and also inspect for damage to the pump inpeller at the same time. Sorry not a fast fix but the best way ... Dishwashers

Dishwasher wont work - starts but then stops and the light flashes. Have tried cleaning it out but dont know what else to look for?


Hello, Try this Crack the door open and then hit the following botton combination high temp wash - heated dry - high temp wash - heated dry then close the door and hit the cancel button. wait for the pump to stop. Hope this helps! Mike ... Whirlpool Dishwashers

Want to know if my dishwasher has a removable food trap to clean? Hotpoint model # HDA150V 60BW


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1764 seconds