Having problems with your Dishwashers ?

Nelson speedwash glasswasher instruction manual/wiring diagram to work out controls etc.


Answers :

Nelson SC40A-11 long time to fill & drain, uses a lot of detergent
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Nelson speedwash glasswasher instruction manual/wiring diagram to work out controls etc.


Nelson SC40A-11 long time to fill & drain, uses a lot of detergent ... Dishwashers

Re:communication board I have an electrician doing repair work since there were two burnt out areas on the communication board or control unit. We have a replacement board and it came with some listed diodes that indicated which component it corresponded to but it does not list all of them. There are several diodes/relays,etc that are burnt out but do not know what component it corresponds to. Where can I get a diagram showing the entire communication board with a complete listing of the entire


We have the same problem, but we can't find the diagram on site\015\012http://www.samswebsite.com/ . Is any other links? Thanks in advance ... Asko 24 in. 1585 Built-in Dishwasher

My Maytag mdb5130aww dishwasher stopped working; the only function it does is DRAIN. The panel buttons light up. WASH, RINSE etc all do not work. How do I test if the control panel is sending out power to the water pump? What else can I check?


... Electrolux 24 in. EDW5500DSS Stainless Steel Built-in Dishwasher

My 2 year old dishwashers control panel does not lite up to allow any functions to work. We had been giggling it to make it work but that does not. I checked the power connect etc and all seems fine.


... GE 24 in. GLD5860LSS Stainless Still Built-in Dishwasher

The top drawer of my fisher paykel dishwasher stops during the cycle and shows an icon of a tap with a line threw it (assume that means no or low water pressure). the bottom works fine so I assume water pressure is not the issue; is there a sensor that could be bad? Also, I did switch the controllers between drawers (good instructions on the fisherpaykelparts.net website) but the problem stayed with the drawer, ruling out the controller.


Did it fill with water? could be 1 of your water valves is faulty, or the little filter for the inlet water is blocked. please reply 4 more help. i"m sure i can fix this problem for you. good luck. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

I have a Whirlpool Model DU943PWKQ0 dishwasher. Several of the controls on the front panel no longer work, ie normal wash, cnacel and drain, etc. Others like heavy duty wash work perfectly. It appears the most used are what is not functioning. My question is should I replace the Microcomputer assembly part number 8530929 or the Console (with overlay) part number 8274732. Can you help as I cannot really afford both!


... Dishwashers

Kitchen Aid Dishwasher model # KUDK03CTSS3 The control panel lights are blinking rapidly, several of them. Nothing works, even after powering off and on again. I see there are instructions to reset the control panel on these before calling for service. How do I reset the panel on this model?


... Dishwashers

Bought a nelson HS9 glasswasher 2nd hand need instructions


... Dishwashers

Bought a Whirlpool Energy Star-rated DU1055XTVS0 four months ago. Have had intermittent problems with the water not running during the cycle. Have read instructions, done the trouble-shooting, etc. Even when the water runs, very often the dishwasher tablets don't totally dissolve. (And the tablets work better than liquid and Jet Dry -- I've had etching problems using that combo.) Very disappointed with this product so far.


... Dishwashers

PDW9280J10SS dishwasher has been in use for about 3 years. The control panel is not working properly. I use the up/down arrows and it turns on heated dry etc. When I push the heated dry button, it changes the lights to the different cycles (which is what the arrow keys used to do). The normal wash light won't come on, the only setting that seems to wash a full cylce is antibacterial. It seems like something burned out. What should I be looking at as a possible cause/fix. Unfortunately, I don't h


... GE 24 in. Profile PDW9280JSS Built-in Dishwasher

My Whirlpool Gold Quiet Partner III dishwasher will not start. I have installed a replacement control board that worked for awhile. When it quit I put the old control board back and it worked for awhile with a portion of the lights on the control panel lighting up. After switching control boards back and forth, it will not work at all now. It will run through the diagnostic program (Normal, Heated Dry, Normal, Heated Dry) but after that the start button plus other buttons are not lit so it will


... Whirlpool 24 in. GU2500 XTP Built-in Dishwasher

Pld2560lcc1 Dishwasher...Control Panel shows 65 minutes left on lower rack, works for about 1 minute, shuts down. None of the buttons work. I changed the control (major circuit) board, same problem. I wonder if it's the control "panel"? I took that off and looked at it. Seems okay, but could the problem. I've heard this model has control problems, but I'm not sure if they mean the major control board or the control panel that has the buttons.


Pulled the touch pad, go after the middle third with a very small screw driver, cleaned the flex circut with contact cleaner\015\012\015\012powered up fine seems to be working again ... Frigidaire 24 in. PLD2560LCC Energy Star® Built-in Dishwasher

PLD2560LCC1 Frigidaire Dishwasher...Control Panel shows 65 minutes left on lower rack, works for about 1 minute, shuts down. None of the buttons work. I changed the control (major circuit) board, same problem. I wonder if it's the control "panel"? I took that off and looked at it. Seems okay, but could the problem. I've heard this model has control problems, but I'm not sure if they mean the major control board or the control panel that has the buttons.


... Frigidaire 24 in. PLD2560LCC Energy Star® Built-in Dishwasher

I have an 8 year-old Kenmore 665.16912 dishwasher. Worked fine until two days ago. Then it stopped working altogether: nothing lights up on the front panel. I have checked the 120 in the electrical box, the door switch is working, the thermal fuse is working and there is 120 volts at the white and black connections to the timer control board. I bought a new timer control board for $120 and that did not fix the problem. What else could be causing the unit to completely stop working?


If all are really good then the only thing it con be is the display (8269205) $25.00 part, if it's bad dishwasher wont run ... Kenmore 16912 Built-in Dishwasher

I have a Maytag quiet series 300, model # MDBTT60AWW. The front control panel have some green lights on but the start/cancel button won't work. The dishwasher will work for 5 days and quit for 2-3 days then work again. I tried to reset the main electrical panel hoping the dishwasher will reset too but it didn't work. I opened the panel on the front door to see if water is getting into the electronic panel but it is dry. I'm wondering if it is the front control panel itself is the problem. I want


... Maytag Dishwashers

Dishes don't get clean. don;t believe there is enough water pressure. worked early on, but doesn;t work like it did originally. have had for several years and don't find our papers and don't know the serial no., etc. of the brand, etc. we have been unable to get a service person in this area, but understand there is a person who works on dishwashers, which we may need to try.


Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... Maytag Dishwashers

The control panel works intermittently.


HI friend\015\012\015\012it may be also timer problem .....did you touched it with wet hand...better to check timer,,,\015\012thank u,,,,,,,,, ... KitchenAid Dishwashers

Control pad not working


... GE GLD4260MSS Built-in Dishwasher

Maytag Quiet Series 300 - Control Panel doesn't work


I had no lights on my control panel, eventhough power was good.\015\012I replaced the control panel ($265 part), it worked for 2 weeks, then I now have the same problem.\015\012Frustrated, I am probably going to buy new from a different m ... Maytag 24 in. MDB9750AW Dishwasher

I have a Kenmore Elite 665 Dishwasher. The front control display has been partially working but the dishwasher still worked. Today when we tried to start it it will do nothing & it is getting the correct power. Would this be the control circuit board or something else?


It appears your timer/main controller/CCU has failed in this instance.For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.I recommend both sites bec ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

The buttons on my control panel no longer work. At first, it was just one button, then two. Now none of the buttons work. The model is a Whirlpool Quiet Wash Plus #DU920PFGQ2. Do I just replace the control panel? The dishwasher is receiving power.


... Whirlpool Dishwashers

I have a KitchenAid Whisper Quiet Dishwasher. Has been working fine. Circuit breaker seem to be working but control board is now not lighting up and buttons do not respond. Seems like no power to control board.


I may have leaked water into the mother board ciruitry. This can happen when there is a tiny leak or when steam gets in. Check with kitchenaid, that is a good product and kitchen aid will stand by thier equipment. ... KitchenAid Dishwashers

The controls will not work the only thing that is working is the cancel drain control?


Probably have a bad touchpad. Go to servicematters.com to learn how you can test it. ... Whirlpool 24 in. GU2548XTP Built-in Dishwasher

I bought a dishwasher at auction in sound working order - a Kenwood Diswasher KDW12ST3A - but there are no instructions with it. I don't have an idea how to make it work. I need the appropriate instruction manual.


GO TO PARTMASTER http://www.partmaster.co.uk/cgi-bin/home.plSCROLL DOWN TO BOTTOM LEFT AND USE INSTRUCTION MANUAL DOWNLOADAND ITS FREE. ... Dishwashers

I have a GE dishwasher with front control panel and at first the wash and dry lights stayed on and it was beeping every 30 sec. when I turned the breaker off for the required 30 sec. the lights started flashing and it is still beeping. The control panel seems to be frozen as it is not working and wont do anything.. everything was working fine before this. I bought it at Home Depot on 3/14/07 and had it installed by a licened electricion. Help


Call ge @ 800-386-1215 for service ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0830 seconds