Having problems with your Dishwashers ?

Dishlex dx302 won't heat water - Dishwashers


Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dishlex dx302 won't heat water - Dishwashers


... Dishwashers

Dishlex dx302 - not heating water - Dishwashers


If it is the old model about 15 years old (i own one myself) it is the water inlet it may be leaking. \015\012\015\012I had the same troubles and i installed a new pipe on the dishwasher and now it heats fine. All you need to do is get a ... Dishwashers

Dishlex dishwashing machine heating water one day and not the next! If the water does not heat, the fan dry does not operate


... Electrolux 24 in. EDW5505EPS Stainless Steel Built-in Dishwasher

I have a Dishlex DX203WK dishwasher and it is not heating the water as it is supposed to. I have removed the heating element and it measures 26ohms, so I suspect it is OK. What else could be wrong?


The thermostat could be faulty and therefore turning the heater off earlier then the desired cutoff.\015\012\015\012Do you use cold water connection or hot? some dishwashers expect the inlet temperature to be within a range?\015\012 ... Dishwashers

Dishlex DX302SB Dishwasher water not heating, have changed the heating element without any success.


Who posted this comment I am really appreciative. I have had the same problem with my dishlex. I disassembled the plumbing and removed a chunk of plastic wrapping from inside the pump. Then I checked the heater with a multimeter. It ... Dishwashers

My DX302 dishwasher wont heat the water, the heating element is ok.


Hi,Yes I had the same problem with the DX302. One of the solder joints on the relay was cracked but hardly visable. Resoldered it and no problems. How to do it:Make sure you turn off the power at the wall and pull out the plug. To g ... Electrolux 24 in. EDW5505EPS Stainless Steel Built-in Dishwasher

Dishlex dishwasher dx 302 not heating water i would like a wiring diagram so i can find & test heating element or relay switching it .Tony T.


... Electrolux Dishwashers

Dishlex DX302 Hi mate, I have the smae problem with the water not heating . I have checked for the burnt out relay (as is common)but no go. You mentioned you could send the service manual and wiring diagram for this model to the previous user you helped out. If you could please send it to me that would be grate as I want to test the heating element. [email protected] Thanks Jason


... Dishwashers

Hi all I have a Dishlex DX302 dishwasher and the dam thing wont heat, checked the heating element (its 26 ohms) was wondering if i could get the wiring diagram emailed to me. Im thinking it might be the control board. [email protected] Thanks ****


... Dishwashers

Dishlex DX302 : Water not heating


It sounds like the control board is faulty. have you checked for dry solder joints on the control board? also it is important the check the resistance of the taco on the wash motor. last of all don't worry to much about the ... Dishwashers

I have a whirlpool dishwasher DU915WKSO: when I turn the dishwasher on, the heating element comes on but no water comes into the unit. I recently replaced the garbage disposal and th dishwasher worked fine for a time or two. Since then I have only been able to get water in it once. Like I said, the heating element works but no water in the dishwasher. Thanks for any help.


... Whirlpool DU1055XTS Built-in Dishwasher

My electrolux dishlex dx303 dishwasher will not heat water


... Dishwashers

Dishlex dx302wb not heating water - Electrolux 18 in. ESL4114 Slim-Line Built-in Dishwasher


... Electrolux 18 in. ESL4114 Slim-Line Built-in Dishwasher

I am looking for a manual for a dishlex DX403 manual - I have moved into a house with this make of dishwasher and there is no manual and at times it does not seem to heat water or dry dishes. Help please.


... Electrolux Dishwashers

Water not heating in dishlex dx302wj dishwasher


... Electrolux Dishwashers

I have a electrolux dishlex dx302 that will not heat the water and dry ,how dose it work?


Hi,Yes I had the same problem. One of the solder joints on the relay was cracked but hardly visable. Resoldered it and no problems. How to do it:Make sure you turn off the power at the wall and pull out the plug. To get to the circu ... Electrolux Dishwashers

Water leaking from under dishlex dx302 - Electrolux Dishwashers


... Electrolux Dishwashers

Hey all, my dishlex dx302 wont heat the water thereforgiving a **** clean. Have searched this topic for a solution and after removing circuit board from front door i found that the board doesnt seem to have dried out like the pics show in some instance any other ideas


Hi,Check your heating element.. Dishwasher ... Dishwashers

E3 Error Hi My dishwasher is showing error E3, which the user manual states "The appliance is not able to pump out the water.", however, other E3 error states a heating issue. The dishwasher does in fact heat the water but generates the E3 error after 10 minutes or so, then pumps out the water from the dishwasher. I'm a little confused as to what the issue is here and what part I would need to rectify the problem. Any advise you could give would be greatly appreciated. Kind regards


The E3 error is a result of water temperature not getting to a nominal value within a particular time. This could be caused by several factors like heater faulty, wash pump not working well, wash arms not circulating water as required. Need model nu ... Smeg Dishwashers

We have a kenmore ultra wash dishwasher. i am unsure of the model number. i believe it was bought in 2001. the NO HEAT DRY button was blinking, so we replace some panel under the door. now the QUICK RINCE light is blinking. i tried the sequesce of WATER HEAT, NO HEAT DR, WATER HEAT, NO HEAT DRY, but that did not help. any other suggestions?? we have a family of 4, and it STINKS not having a dishwasher! litterally sometimes : )


... Kenmore 15129 Built-in Dishwasher

Bosch Dishwasher I currently own a Bosch dishwasher. One of the selling points, if I'm remembering right, of the dishwasher was it was supposed to super heat the hot water that is coming in from the tap. I have 3 problems. We have to rinse the dishes by hand before putting them in the dishwasher, Otherwise they won't come out clean. The dishwasher will run for four hours sometimes longer. It doesn't seem like it is heating the water any hotter than what comes out of the tap.


Your control board is bad. ... Bosch 24 in. SHU43 Built-in Dishwasher

Do these 'portable' dishwashers 'heat' water prior to washing? i have customer complaining bout the dishes not coming clean..yet the water entering the dishwasher is cold, does not appear to heat water prior to washing.


Most dishwashers require a minimum 120 degree inlet water temp. The heating element will boost this up during the main wash cycle to aprox 140. Do not hook a dishwasher up to inlet water temps above 150. ... GE Hotpoint HDA3500N Dishwasher

Hi, I have a Kenmore 15879 that is basically working except the bottom water spinner...lol (don't know technical name). The dishwasher pumps the water into the bottom of the dishwasher, will heat the water, but not disperse the water in the spinning sprinkler manner it's suposed to. I've opened the dishwasher in time to see that water is spurting out of the holes about 2" high, but it's just not spinning. The water also drains just fine after the whole cycle.


This is caused by the impeller being clogged or the pump is failing, When the pump is woring properly the water will shoot out with force. ... Kenmore 15879 Built-in Dishwasher

Leaking from under dishwasher. Has run great since 1996. Under counter model in manufactured home. Chnaged to drop in pellet dishwasher detergent and it ran great. There is no water inside the dishwasher circular drain. We never use the heating coil to dry the dishes. We have turned off the water supply line under the sink to the dishwasher. Cool clear water is running out from under the bottom right corner. The hot water heater is right next to it and everything is dry and warm under it which i


Hi,Depending on the model you have this could be a couple of things. The most likely suspect is the water inlet valve. What I would recommend to do is take the bottom toe panel off, typically there are either 2 or 4 screws holding this pa ... Dishwashers

Ken wood kdw60w10 dishwasher no hot water, there seems to be no power to the inline heating element, showing 30ohms resistance and power directly applied when removed from the dishwasher and it heats up. No fault codes on panel, works normally apart from no hot water, any other ideas? Many thanks


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2129 seconds