Having problems with your Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher ?

My small boy fell on my open dishwasher door (Bosch) and now it's opening slightly in mid cycle and cutting off. It's not leaking or anything and works perfectly if I clamp it closed. When it's opened down then, it's very slightly slanted downwards. I have taken it 2 a repair shop twice and they've failed to sort it saying that its the sensor may need to be replaced but I think it's the hinges are strained. What should I do?


Answers :

Repair Help & Product Troubleshooting for Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My small boy fell on my open dishwasher door (Bosch) and now it's opening slightly in mid cycle and cutting off. It's not leaking or anything and works perfectly if I clamp it closed. When it's opened down then, it's very slightly slanted downwards. I have taken it 2 a repair shop twice and they've failed to sort it saying that its the sensor may need to be replaced but I think it's the hinges are strained. What should I do?


... Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher

My Samsung DMT800 series dishwasher has had the main control board replaced under warranty three times since I've had it. The problem: The unit won't activate via the touch buttons until I pull the plug for a second and "re-boot" the device. It then works for a few days or a week and fails again. The last board was replaced two weeks ago and it has failed only once. I'm waiting for it to fail again before I call Sears home services again. Has anyone else had this issue? My repair man has said y


... Samsung Dishwashers

We have a Maytag "Dependably Quiet" Dishwasher approx. 17 years old. The door doesn't close properly (after I mistakenly lifted and pulled on it at the same time to pull the machine out slightly further). It seems to have dislodged at the bottom somewhat and I don't have any repair manuals that show how it is secured. Both of the springs and plastic hook mechanisms are in place for either side, however, it has dropped slightly down on the left side and binds on the bottom access panel. Any h


It would be helpful if you provided the model number of your dishwasher.\015\012\015\012See below links to service manuals for a few models of Maytag dishwasher, not sure if any of these is yours. I believe the last one might be the Quiet ... Dishwashers

The door of our Eurotech Dishwasher EDW 254 E when opened and released just suddenly "drops" down uncontrolled. Apparently the "spring" the right lower corner broke. Also, it does only poor, unacceptably thorough cleaning job now. Will you please dispatch a repair person or suggest names and addresses / tel. nos. / e-mail addresses of repair persons / shops that can fix it. If spare parts are needed please indicate the source(s) for them. Possibly send us via e-mail a copy of the manual for t


Hi.Problem is likely the door hinge springs, hinges, stoppers or other part comprised in the door hinge assembly.See parts B ... EuroTech 23 in. EDW254E Built-in Dishwasher

I have a Karcher K3.48M electric pressure washer which used to shut off when you weren't using the cleaning wand. This no longer happens and there is alot of water running out of the bottom of the unit. (This didn't used ot be the case) I expect a leak somewhere inside the unit, but I'm wondering even more if there is a pressure switch which has failed that cased the leak. In other words, if I find and repair the leak and there is a failed pressure switch, it will likely only break again. I can'


Hi you will have a 8 digit number on a silver plate on the machine with a number like 1.141-470.0\015\012Then go to www.karcher.com then on the left click on Europe, then you ... Karcher PSI Electric Pressure Washer

The reset switch on my NS powerwasher has failed twice. the replacement i got from NS was installed by their approved service center in antiock illinois, but it failed to reset the motor. Is there a service center in NE Illinois or SE Wisconsin that can service my washer?


Hi\015\012\015\012I see you are having very bad luck with service on this washer so I'm sorry to hear that. From my knowledge of North Star they usually have fairly good customer support and it irritates me to see you are having these pro ... North Star Pressure Washers

Our LG 6810 dishwasher has stopped cleaning. After the cycle the dishes are wet and covered in greasy clumps. We ran the test cycle and got the following: 3H/U3 11 22 33 44 55 66 04-2 32 33 0 (inlet valve) 35 36 37 38 23 (Thermistor) 3A 3A (beeped twice and showed 3A) 3A (beeped twice and showed 3A) Any advice you could give me would be appreciated. I have the service manual but have never done any type of dishwasher repair. I'd like to not have to replace this dis


1.) Take racks out of unit.2.) put both of the spray arms in the 12 o'clock position3.) Run the washer,once the washer has started wash cycle,open the door and ensure the spray arms have moved off of the 12 o'clock position. Write down re ... LG LDF6810 Built-in Dishwasher

The slide on the upper basket keeps falling out. It's been fixed twice but doesn't hold. The second repair man who put the slide back in the rollers said he couldn't see anything wrong with it, but it still didn't hold, so he called your tech dept. who said they had roller and slide kits at a total cost of $66 for this model. The slide kit had a new part number but the tech department didn't tell the repair man why they'd changed the part. The roller kit was one for dishwashers the sides o


One option is installing stainless steel washers on the rack supports that screw into the side of the tub. The rack falls down because there is too much "slop" with the rack...a couple small washers to space them tighter normally does the trick. ... Frigidaire 24 in. PLD2850 Built-in Dishwasher

My Kitchenaid dishwasher failed to drain. Is there a way to fix this without calling in a repair person?


Check underneath and disconnect the drain hose that leads into the pump to see if there is something blocking it.  I had a similar problem and the technician found a cherry pit that was blocking the hose.  He told my wife that it was a ... KitchenAid KUDK03ITBK Built-in Dishwasher

Buzzing sound we have a gold quiet lll edition , it is now buzzing when we start it. we have had a repair man here twice each time he has taken it apart and cleaned it. he has said because we have hard water, the water oxidized and some sediment has broke though the seal into the motor and now we need a new motor. does this sound right? we have had dishwashers from whirlpool for years prior. never had to change a motor. please can you offer some suggestions? thanks very much desperate in Mexico.


If buzzing while it is washing then probably is a motor problem but mostly not from hard water just poor quality parts ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

Our kenmore dishwasher... 8yrs old.least expensive model stopped draining. Husband tried fixing it and couldnt. Before we paid a repair man 75.00 dollars just to look at it...I shopped on craigslist. A lady was selling a ''6yr old kitchenaid'', that she said she paid 800.00 for and would sell to me for 100.00. She was just ''upgrading all her appliances''. Anyway...I bought it...thought Id rather put 100.00 into an 800.00 dollar kitchenaid as oppose to mine. I ran it last night for the first tim


Only if you choose to think so. I have seen old equipment in better shape that much younger vintage stuff! It depends on how much use it has had and if it has been run to the max with heavy loads to the point of making the machine beat itself up pre ... Dishwashers

The door support on our machine seems to have failed and it has to be manually lowered otherwise it crashes down - can this be repaired?


There is a spring at the bottom of each door connected to the door and the frame of the dishwasher.Slide the dishwasher out to access the side where the spring is. One or both are probably broken. ... Fisher and Paykel Dishwashers

Hi I have a maytag dishwasher and a maytag fridge my fridge has been nothing but problems it has flooded my house twice in the past 9 years, the part on the inside are braking that hold the shelves in place and my dishwasher is on a recall that i just found out today. IT has a part called vent inlet that is cracked and the part is no longer available,so is part can i use it with out it in and I need to have a repair person in to fix what ever the problem is that has caused house fires I have no


... Kitchen and Much More Dishwashers

The circuit board on our Miele G646 dishwasher has failed. do we 1) see if we can get another one second hand and in which case what other models have a compatible circuit board 2) try and get the board repaired and who do you recommend 3) bite the bullet and pay an exorbitant amount for a new board or 4) give up and just buy a new machine Thanks


What is the dwasher doing or not doing and how do you know it's the board. More information required please. ... Dishwashers

Samsung DMR57 We bought a Samsung in June and have been trying to get it to work properly ever since. It is very quite which is great, but like the other person wrote the thing keeps coming on even when the child lock is on. We have had a repair man out twice but it they haven't fixed it yet. The dishwasher is right under the counter we use to prepare food so we often rub up against the controls. The power comes and and it starts the machine on whatever cycle it used last, or rinses the dishes.


... Samsung 24 in. DB5710DT Stainless Steel Built-in Dishwasher

Dishes won't clean and leave a white film. Repair guy has been out twice and says everything mechanical is working good and that its the detergent with rinse aid. I've been using the detergent for 4 years the same way and adding rinse aid as well. Also the water temp was increased to 120 from 115 because he stated it was to cool. Help.


Have you tried just running an empty dishwasher cycle with vinegar? I found this solution on another post and it worked for me. Empty your dishwasher, place a coffee cup securely on the bottom rack. Fill it all the way with vinegar, and run your typi ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

I have a whirlpool dishwasher thats a quiet partner 2. the cancel drain light keeps blinking and nothing else is happening. i try to unlock it and then the normal light starts blinking also and still nothing happens. i called a local repair shop and they said i need to change the control board so i did and its still does the same thing. can you give me an idea of where i need to start to fix my problem?


Can you here the pump running or check to make sure there is no water in the base... ... Dishwashers

I can not get the water to drain during a normal wash cyclr. When I press the start/restart button twice it makes noise but no water comes out the end of the drain hose. I have put a shop vac on the end of the hose and can get water out that way but it appears not to be pumping. The washer sits for up to 6 months at a time without being used. Thanks for any help Ted Berry Placencia, Belize Central America


Teddy,\015\012\015\012Buy a new one...then go fishin!\015\012\015\012Richard Vantine (ret'd Colonel...USAF) \015\012Bingelrade, The Netherlands ... GE GSD5310D Dishwasher

Husky power washer no presure? No presurre when I hit the trigar. only used 3 time found out that other peope where having th same problem I was on the internet to find a repair shop.


... Pressure Washers

I have a Whirlpool Quiet Partner 3. It sat up for a few months because the control panel went out and it took a while to save up and order a new one. Now it blew the thermal fuse. I put a 15amp automotive fuse in it to try it, and it runs until it fills up and blows the fuse again. I am trying to figure out how to test the motor and the heating element to see if they are shorted. My local repair shop told me that they want to replace my new panel with their panel first, and that after that


A 15amp automotive fuse is rated for a 12VDC system in an automobile, not a 125VAC houshold electrical system in an appliance. I don't think your automotive fuse can handle the start current being drawn by the main wash pump as the dishwasher starts ... Dishwashers

Water not coming in. Been seen twice by British Gas engineer (British Gas Homecare appliance cover) and have been told its not fixable, not safe and must be replaced. I would rather repair it.


Hello,\015\012This is difficult to diagnose especially as it has been condemmed by your Insurance cover.The normal cause for these dishwashers to not let in water is an airlock.Now if you know a bit about DIY you could have a go.Firstly remove ... Electrolux 23 in. ESI602X Built-in Dishwasher

I have a Kitchen Aid dishwasher that ha had the processing board replaced twice in the last year. It is not functioning again so this will be the third time in 13 months. Any reasons why the board keeps failing?


Do you live in an area that has a lot of power outages? That could be one reason. Another reason is an area that has power surges. You can have an electrician add a surge protector to your electric fuse box that will help. Otherwise, if a good techni ... KitchenAid 24 in. KUDS25 Built-in Dishwasher

Dishes come out cloudy especially the glasses. Small amount of water remains in unit at end of cycle (which we drain each time before commencing cycle). We have had repair person here twice to clean unit and look over and he cannot seem to fix the problem.


The problem is from hard water. there is a new product out just for this problem. its called the dishwasher filtration system. it filters the hard minerals out of your water before they enter the dishwasher. it has a money back guarantee and works am ... Kenmore Dishwashers

The opening latch on the amana sofsound II dishwasher came loose. To avoid a service call, I would like to disconnect the door and haul the door to the repair shop. How do I disconnect the door? This same problem has happend before and I tried to replace the opening latch myself but I ended up having to have a guy come out and fix it.


... Amana 24 in. ADB2200AW Built-In Dishwasher

Own a KitchenAid dishwasher, model KDC-21AD. Unit stopped shortly after startup cycle began. When cycling thru the various wash cycles, I hear a slight hum when selector switch is at the "pots/pan" selection. About 2" of water is standing in base of dishwasher and it will not start. Checked the KitchenAid site and they do not list my dishwatcher. Would like to be able to repair myself or have it done at reasonable price.


... KitchenAid Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0290 seconds