Having problems with your Dewalt DPD3100 Gas Pressure Washer ?

My DPD 3100 is leaking from a brass fitting on the side of the pump (opposite of the white ??reset?? button. The brass fitting has a star shaped whole in the center. When i remove the fitting, there's a heavy duty spring behind it. Do i need to replace the fitting, or is there another problem? Where do i find parts for this?


Answers :

First things first, before replacing I would wrap this valve with teflon tape and then retighten and see if the leak stops, I checked the entire schematic and found no listing for a spring so this is part of a valve assembly of some type. It might be the unloader or the thermal valve so if there is any doubt about getting the right pressure on the cap I would replace the valve to ensure safety. the valves I saw are less than 25.00 so for the price I personally would replace. check the surrounding area for cracks also. Now as where to buy parts, you can go to Dewaltservicenet.com and download a parts breakdown of the pump assembly and also other areas for this washer. You can also buy the parts online from them. Let me know if you need more assistance
Sounds like a pinched oring
\015\012You can find parts with exploded pictorial illustrations here below at decent prices
\015\012
\015\012http://www.mastertoolrepair.com/dewalt-dpd3100-type-p-59398.html
Repair Help & Product Troubleshooting for Dewalt DPD3100 Gas Pressure Washer

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My DPD 3100 is leaking from a brass fitting on the side of the pump (opposite of the white ??reset?? button. The brass fitting has a star shaped whole in the center. When i remove the fitting, there's a heavy duty spring behind it. Do i need to replace the fitting, or is there another problem? Where do i find parts for this?


First things first, before replacing I would wrap this valve with teflon tape and then retighten and see if the leak stops, I checked the entire schematic and found no listing for a spring so this is part of a valve assembly of some type. It might b ... Dewalt DPD3100 Gas Pressure Washer

I HAVE A CEAN MACHINE 1210 COLEMAN POWERMATE MODEL # pwo701210 MY PROBLEM IS THE SPRAYER HOSE TO THE PUMP DICONNECTED FROM THE PRESSURE OF THE MACHINE I FOUND 2 PARTS A SPRING AND A LIL BRASS PIECE THAT CAME FROM INSIDE THE ADAPTER NEED TO KNOW IF THERES ANY OTHER PIECES MISSING MAYBE A LITTLE DIAGRAM WOULD HELP SO I WILL KNOW WHAT I NEED PLZ HELP !!!!


Need a repair manual where can I find it ... Pressure Washers

What fitting is needed to connect the water line to the back of the dishwasher. It has a plastic 3/4 or 1" pipe thread (I think) out the back side. It came with a standard brass elbow, but it seems to be missing a fitting to adapt to the plastic threads


... Haier ESD210 / ESD211 Built-in Dishwasher

Hi...I have a Westinghouse Freestyle 921 Dishwasher...9 years young...Model SB921SG...that has recently been leaking from the bottom right hand side front corner of the door when performing its usual heavy duty cycle...It appears that the main door seal has significantly perished and is causing the problem...Therefore I have purchased a new Door Gasket part no.0208400069 from a recommended spare parts agent in Brisbane and after several attempts to re-fit this gasket/seal to the door...I still h


... Dishwashers

Assembly plans for karcher 2400 psi pressure i recently had a problem, with my pressure washer. i was cleaning out my hose and took the hose assembly and brass fitting off. run water threw it thought i had cleand it out, put it back together and now when i hooked my water hose back up the water comes out of the despencer instead of the pressure wand. does eny one no what i need to do to revurse this?


... Honda Karcher G2400HH-R Pressure Washer

I have an Optima series G1470 or G2470 dishwasher with a heavy panel on the front to match the kitchen cabinets. I want to tighten the door spring so I can open it more gently. House guests tend to let go of the door part way down and it bangs open the rest of the way. Also, I have not put salt in. Do I need to in Wisconsin? If so, what kind of salt do I use? Thanks, MJ


About the use of salt depending on water hardness, there is a very good explanation on page 11 ... Miele Premier-Plus Built-in Dishwasher

I need to replace the brass banjo fitting on a simpson 2000 psi washer, can't find the part in MD . Mod #dd2000, sn#9605525


... Pressure Washers

My Husky 2600 GCV 160 engine works but their is no water flow. I believe the brass nipple that has a spring behind it is stuck. Where do I get a new one?


... Pressure Washers

Soap (Simply Green) is not being pulled from ciphen hose? I unscrewed the brass male fitting, where the clear cyphin hose is attached, and observed a small spring and ball bearing? Nothing appears wrong, what can or should I do to ensure outgoing stream of water contains the cleaning agent?


... Briggs Pressure Washers

We have an electrolux els4114 dishwasher and I need to fit the spring in the dishwasher tablet door , how do I do it ?


... Electrolux Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher

Heavy duty and normal wash buttons flashing together...4-hour delay button has a steady light. I unplugged dishwasher, I have pushed cancel, cancel and heavy duty and cancel and normal wash together.


Sounds like a logic board problem. You may have to change the logic board! ... Dishwashers

Dishwasher not working. 4 lights flashing- heavy duty, normal, cancel, and start/resume- way to reset. tried unplugging and it then had 2 lights flashing- heavy duty and start/resume. thanks!


... KitchenAid 24 in. KUDI02FR Built-in Dishwasher

I tried to repair my karcher spray gun. I have a small spring and a small white plastic piece which the spring fits onto to find a home for. I'm sure its to do with the trigger handle but I can't see where it fits. Can you help, a diagram would be helpful.


... Karcher Pressure Washer Gun 91120200 91120200

I have a Kitchen Aid dishwasher Model KUD1021RWH1 that is malfunctioning. The display has the Heavy Duty, Normal and Cancel lights all flashing on and off at the same time. This problem has been intermitent. The happens after we fill the washer and want it to start. I push the Normal button and the heavy duty button flashes with the normal button and the dishwasher wont start. So, I push the cancel button and it flashes also.The washer has been cycling fine since we bought it a few years ago unt


... KitchenAid 24 in. KUDI02IR Built-in Dishwasher

Brass part in wand handle because the brass fitting


Bronze breaks, why it does not have flexibility. it substitutes part for steel inox\015\012 ... McCulloch FH180A Electric Pressure Washer

I have the parts to repair door on an ADL347 Ignis Dishwasher but need an exploded view to see how they fit, any help?


What is your model number is then we can get started then ... Dishwashers

Kudi02frss1 Heavy Duty / Normal / Cancel Lights Flashing.


... KitchenAid 24 in. KUDI02FRSS Stainless Steel Built-in Dishwasher

Springs Do I have to pull it out to replace the springs? Is there a bottom panel where the springs are located? If so mine is behind a masonry kickplate so I can't see it. Where can I get parts?


Go please to www. repairclinic.com and get itGod bless you ... KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher

Broken fitting The plastic curved piece that attaches the hose to the white fitting on the back of the dishwasher broke, and I need a replacement.  I have been to Home Depot and they don't have anything to fit it, and I was told to go back to the manufacturer for a replacement piece but have looked online and can't find anything that would allow me to order the part.  Help!??


You don't have to change that piece,just tie the hose (drain hose ) to something that is equal height,this prevents siphoning. Please Rate This ! ... Danby 22 in. DDW396 Free-standing Dishwasher

Hello there, I have a Bosch Logixx dishwasher which I purchased just over 2 years ago. My upper dishwasher tray is not fitting properly into the hose pipe holes on the inside of the back wall of the dishwasher. It has a movable plastic mechanism sort of fitting which is dropping off everytime I open the tray to keep the utensils and unable to close it fully until I re-adjust the plastic to fit into the holes proeperly and then it works. I am not sure how to fix the problem, do I need an En


Hello Deepak,\015\012\015\012You can definitely fix this yourself, but I'm not entirely sure from your description which part is "dropping off". It may be a simple fix where something needs to be clipped back into place or you may need to ... Bosch 24 in. SGS69L02 Logixx Built-in Dishwasher

I found the problem with my dishwasher, a spring in the handle (154556703 Frigidaire Dishwasher Door Latch) had broken. All I need is the spring, not an entire door latch assembly. Is there any way I can get the part number for the individual spring? V/r Matthew Quirk


... Dishwashers

Spring broken in soap dispenser Neff dishwasher. How do you fit new spring. One of the spring arms is stepped-does it go certain way round?


... Neff 24 in. S4456 Built-in Dishwasher

Door spring on dishwasher broke


I have just done this on my own dishwasher, and managed to bend the next curl of the springs to replace the broken ends, see instructions and pictures here:-\015\012 ... Jenn-Air 24 in. JDB8910 Built-in Dishwasher

I need to replace my dishwasher. I need to know size specs to order one that will fit. My measurements are a little dif. Then what is offered. Can anyone help??? Ge model no. Gsd4030y70ww


... GE Dishwashers

Lights blinking - back & forth Heavy Duty & Normal


... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0570 seconds