Having problems with your Dishwasher Moda indesit 2114NI ?
Where to get the parts and can I do it my self.
Timer knob off
Repair Help & Product Troubleshooting for Dishwasher Moda indesit 2114NI
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
I have an electrolux dishwasher dx302wj*03 model. The fault code 50 is showing. Does this mean the control panel is faulty or the pump needs replaced? We have been able to fix other problems our selfs from the past and we have avery good store to get all the electrolux parts.
Bosch SHU43C Dishwasher. Where to get parts - quick? Needs a new control-board / circuit board. All valves, switches, heater appear to work. Won't run open the water inlet valve. Won't run the self-check program. Has a burnt connection on the control 'mother-board'.
1-800-944-2904 That is Bosch Company. They will send out-- next day. ... Bosch 24 in. SHU43 Built-in Dishwasher
I have a Bosch (SHU5302UC/U12). The washer often takes 2 or more hours to run. Sometimes it gets stuck for a long time part way through (e.g. just sits at "43"). Other times, it gets stuck at 1 and won't stop on its own. The latest thing is 2 dots have appeared on the display that I've never seen before. For example, instead of "43", it reads "4.3." Eventually it gets to "C.L." but does not stop running. Also, its been making very strange noises during part of the wash cycle.
... Bosch 24 in. SHU43 Built-in Dishwasher
I have a Danby Dishwasher model # 67638 18052. There is a slight crack in one of the parts underneath that is allowing water to leak out. The part is located in the back corner and it is a pale yellowish elbow shaped connector. Can I get some some kind of glue to seal it, or do I need to get it replaced? It that going to cost a lot? Is it going to be worth it?Thank you for your time.
... Danby DDW1805W Designer Series Free-Standing Dishwasher
Have a dd603 with an issue...took off the arm and the metal silver disk (the ones with holes) to get to the wash impeller-(the thing with blue blades) the wash impeller will not spin-which I think is part of my problem, since i looked at the lower drawer and was able to spin the blue blades easily...was also able to pull it right out. Cant pull out the upper wash impeller!!!! Really want to get this fixed before my husband gets home and I get the lecture about how I purchased a cool looking d
Lol I don't know a lot about dishwashers, just do him good and tell him afterwards, and then hire a mechanic to look at it.Why would you want to pull the propellers off anyway? The top one doesn't pull off because it's screwed on, and the botto ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher
Hi I have a Nemo Dishwasher and the top spray arm is not turning. The bottom one is going fine and there is certainly plenty of water getting into the washer as I opened the door with the washer going and it flood me. I can see the water getting into both spray arms - the bottom one has a excellent upward spray and turns - the upper spray arm has water getting into it but it will not turn. I have cleaned the dishwasher out and any internal parts that I could find so it is spotless - this is so f
... Fisher and Paykel DS602 Dishwasher
I need a small part for the bottom washing arm to attach it to the arm. It is a small round grey plastic part. I have emailed ASKo and not gotten a reply. Does anyone know where I can get parts for
... Asko 24 in. D3350 Dishwasher
A glass shattered in a thousand pieces in the dishwasher. I cleaned and vacuumed everything except the very bottom that I can't get to. I took out 8 screws, removing the round rotator piece at the bottom, but that still doesn't get me into the very bottom where I'm certain there is still glass. Question #1 - Will leaving the glass down there hurt anything? Question #2 - If yes, how do I get the rest of the part off without damaging it? I have a 10+ yr old Model DU920QWDB3 Thank y
The glass should just go down the drain from there. I doubt any piece that made it into there should damage anything as they are would have to be pretty small and as big as any food particle that could fit into there so you should be fine. If you rea ... Whirlpool Dishwashers
I'm working on a deal with a parts company that may allow us internet technicians to sign up with for an account so that when we recommend parts, if the customer clicks on the link and purchases the part, we would get a percentage of that sale. Post here if you're interested. This is for HVAC and Appliance technicians.
Cool idea. ... Fisher and Paykel 23 in. DD-603 Built-in Dishwasher
I have Kitchen Aid Dishwasher Model # KUDMOITJBLO. We began having trouble with the top rack coming out of the brackets on the upper rack track. Kitchen Aid sent me 4 parts # 8268785. The problem is that the brackets that they sent have wheels on them. I don't know how to get them into the track. A call to Kitchen Aid got me no where. They claimed that they don't sell parts so therefore they could not help me (with the parts that they sold me). The situation has gotten progressively worse.
I removed the tracks from inside the dishwasher. Then I was able to carefully remove the endcaps (something I had not been able to do previously) carefully. The existing broken wheels slid out and I slid two new brackets into each track. ... Dishwashers
Upper spray arm and tube assembly. This part fell off the back wall. Can not figure out how to get it to stay on again. Looks like it should clip in, but nothing to snap it in place. The part does not look brocken when compared to the part would order to replace. No info in the manual and their service department was no help, How do I fix this.
Hi,\012Those p[arts wear and even though the parts do not look broken they are not up to the specs. of a new part...\012That is not that hard to fix and you can easily buy the parts yourself online... ... Bosch 23 in. SHU 8805 Built-in Dishwasher
My kitchen aid dishwasher will not start I replaced the interface control board thinking that was the obvious problem. When you go to set the dishwasher to start some of the settings don't always light up then when you push the start button the lights will flash then start but it's not flashing and won't start. I get lucky once in a while and get it to flash then start. I don't know where else to look. I don't want to start replacing parts one at a time till I get lucky. My model # is KUDIO1F
Check all cables especially the ribbon cables from the user interface to the electronic control assembly as steam from dishwashings will create small amounts of corrosion and inhibit signals to and from these 2 components,unplug each,inspect,and reco ... KitchenAid Dishwashers
KENMORE THANKS FOR THE INFORMATION YOU SENT ME R TRENDLER I HAVE TO TAKE THAT AS THE BEST ANSWER I GUSS I JUST DID'T WANT TO HERE THAT.ITS TIME FOR A REPAIR MAN. FROM SEARS OR PUT IT TO THE CURB.BEFOR THIS I HAVE PUT 4 BUTTON PANELS IN THIS MACHINE+4 CIRCUIT BROADS.THE PARTS I BOUGHT ARE GUARANTEE FOR LIFE.DOSENT DO ME ANY GOOD NOW.700.00 FOR UNIT 350.00 IN PARTS CRAZY.I COMPLAIN TO SEARS THEY TOLD ME THEY WOULD HELP AND GIVE ME 10% OFF IF I BUY ANOTHER ONE HA .I DID'T MEAN TO GET DOWN ON YOU GU
Next time come here first we will always help ok dont buy ken more buy whirlpool its the same thing or frigidaire or ge they all make kenmore sears has changed from the old times sorry for your troubles wish we could have talked sooner follow that s ... Dishwashers
Dishwasher problems I have a counter top dishwasher and it's not cleaning things like it used to i think its clogged but i cant get to the drain because it is in the bottom i tried draino but it didn't work i also tried unscewing the bottom but i cant get that part out i think there is somthing stuck in there.
First thing to check water hose that connect at back of machine. pull the screen out and clean it. use a pliers. I run my under water then use a q-tip if its clog to clean the rest.\015\012\015\012Then pour a cup of vingar in machine and ... Danby 22 in. DDW396 Free-standing Dishwasher
Kenmore Ultra wash III will no longer stay connected to faucet after filling...what part should I replace the hose or the faucet adaptor? When we turn the faucet on to start up the dishwasher it falls off...when we finally get it to stay connected with water on...it will fill but then falls off again...get it to stay on, it empties, but then after it has completed filling up again it disconnects from the faucet.
If your adapter that hooks up to the faucet has 4 little white plastic jaws inside it then it can be rebuilt. there is a kit that replaces those 4 jaws, the spring, the attaching clip and the internal seal.. usually runs around 10 buks or so. if i wa ... Kenmore Dishwashers
The upper spray arm on our dishwasher has become detached from the back of the machine, and there is no obvious means of reattaching it. Are there some clips perhaps that have snapped on the part which attaches to the back wall of the d/washer (part number PP-TD20 - it's a 4 by 1 1/2 inch long rectangular shape with rounded ends) or does this piece somehow need to be taken apart (how - i can't see how i might do this?) and the transparent 2nd layer underneath get attached first? Thanks, Sarah.
What exactly the brand / model of your unit.?Let me know.Thanks ... Dishwashers
The rods on the bottom rack of my Sears Model 665.17014401 Serial FS2806667 Stock 17014 Type 57510 have been falling off. Sears parts people say in excess of 145 to get another on just like it. The washer gets dishes clean. The tray is junk? Suggestions
... Kenmore 17024 Built-in Dishwasher
Leaking from the dryer vent on base of door during wash cycle. I know I have water coming down through the dryer vent in the door. I guess it works like a thermostat in a car and opens when it gets hot, but it leaks cold. Can I get that part?
Before try to repair, gather the model and serial number from the unit and contact LG support line. There was a recall on early versions of the (energy saving) condensing drying cycle and specifically most of the components in the door.I ... LG LDS4821ST Stainless Steel 24 in. Built-in Dishwasher
I have a kenmore dishwasher 665.16529000. When I opened the dishwasher this am the pressure tower part number 8268862 was not connected-it was off. The exposed part is a black rubber thing. It looks like a doughnut. I can't figure out how to get the pressure tower re-connected.
The tower attaches to the bottom rack and when the bottom rack is pushed in the tower sits on top of the following part. Check for cracks in the tower. It may explain why you cannot fit it back in place.\015\012\015\012 ... Kenmore Dishwashers
Parts Where can I get replacement parts for McCulloch 1600 psi jet washer? The adapter at the bottom going from the hose to the body is broke.
Go to McCullochpower.com and under power equipt click on pressure washer follow the links till you get to page about ordering parts and you will need your exact model number but the parts can be ordered online or there is a link to find a dealer near ... McCulloch FH160G Pressure Washer
Have a kitchenaid dishwasher KUDS25SHWH1 - the child-lock light came on and will not go off. It is a light and no button to push and hold except all of the select buttons for the type of wash you want, no air dry button. How do I get this light off?? The Child Lock light has come on by it's self and I cannot get it to turn off. I have never used this feature before. I have tried to hold the Energy Saver button for several seconds but the Child Lock light will not shut off. The dishwasher is loc
Unplug the unit for 15 minutes then plug it back in. This should reset all your computer system and make everything work again ... KitchenAid 24 in. KUDS25 Built-in Dishwasher
I need to clear out broken glass from the gray pan underneath where the water drains to, but I need to take the twirling water sprayer off first to get to the next piece that looks like it is bolted down, and I cannot see how to remove the twirling sprayer part. The piece in the center of it does not appear to be a screw off part, so I am at a standstill.
Hold the twirling sprayer part and unscrew the big round nut part just above it, then you will see a 3/8 nut,remove it and sprayer arm will come off ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher
I have LG dishwasher for 2 years now. Working perfectly until one day one glass gets broken during washing cycle. Immideatly we get EO error. We check possible reason of error in the manual then decided to try to fix ourself. We open bottom cover and drain outcoming part. Immideatly we discover a piece of glass that was preventing a small plastic piece to rotate. We remove that piece of glass. Put back covers and machine. We connected it back to outlets and run it. All was working again !!! This
In order to fix problem we disconnected dishwasher, put it on one of side, opened bottom cover - the one that is outside of dishwasher. We find out the part that is\015\012connected to the drain horse. We take of 3 screw and open that part too ... LG Dishwashers
Part missing recently aquired a aqua save dws939 in silver.all in excellent working order but seems to have a flap/ cover missing over the handle area. the door opens fine so its not the handle mechanism but it looks like it needs some sort of silver facing or flap . can you help / tell me where i can get the part ?
... Zanussi Dishwashers
The rollers of the top shelf of my ASKO dishwasher are worn out and catching and likely need replacement. Can I get the spare parts and replace them myself? If not, where can I get ASKO service in Toronto, Canada?
Discount Parts\015\012Major Appliance \015\012& Consumer Electronic Parts.\015\012\015\012TOLL FREE 1-(888)-338-3790\015\0128:00AM - 12:00 MIDNIGHT\015\0127- DAYS ... Asko Dishwashers