Having problems with your GE 24 in. GSD6660GSS Built-in Dishwasher ?

GSD5500G03BB Sensor Error

\015 Wash cycle starts but, then stops and sensor light comes on and we get an error tone.\015

Answers :

Repair Help & Product Troubleshooting for GE 24 in. GSD6660GSS Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

GSD5500G03BB Sensor Error


... GE 24 in. GSD6660GSS Built-in Dishwasher

On my bosch shu66 diswasher the error code indicates a number 1, aqua sensor I think. There is a screw missing in the soap dispensor and it's been letting water into the door interior. could this be repaired by replacement of the screw and drying out the interior insulation and wiring The solution I tried didn't clear the error code on the panel. Is there a reset or do I need to replace the aqua sensor or ? The machine still won't start and displays a #1 on display. There is no water in the whi


... Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher

HOOVER HED60-86 Dishwasher Error Code: Temperature Sensor Failure


... Dishwashers

Intermittent problem with error code E 01, which tells me there is a leak. However, I have turned the dishwasher on its side and back and am certain that the pan is empty. Indicates a false error code or sensor. How do I fix that or disable it?


... Electrolux 24 in. EDW5500DSS Stainless Steel Built-in Dishwasher

On an AEG Favorit 64570 VI we have an error 20. Manual indicates a drainage problem, however when we pour in water, it gets pumped out without a problem. No obstructing in the exhaust tube. Next we checked the pressure sensor, by taking it out and blowing into it. It clicked as pressure was applied to it, so the inner switch worked. Everything is clean, but still we get an error 20. What does seem strange is that the appliance does not take in water. Any suggestions are welcome.


... AEG 23 in. Favorit 86070Vi Built-In Dishwasher

Boash she4amo Getting a Sensor Error (FS) E:06 when running the Customer Service Program....indicated by the CLEAN led status being lit....thought it was a door sensor failure (chart indicates "door" in the chart beside this failure....but further testing indicates the unit knows if I open the door, and stops the program, so it isn't that.


... Dishwashers

Our GE Dishwasher gsd4425 model has an error code of C3 - drain sensor not functioning. We have hit reset several times and this error code just keeps blinking. I believe the dishwasher was purchased in 1997. Tips on fixing?


... GE Dishwashers

Hobart commercial under the counter diswasher LXIC Model Number 130016. DELIME light comes on every day at startup. Machine will immediatly run (in DELIME mode I think) for about 5-10 min and then get E4 error. We unplug power to the unit let it set, replug it back in after 3-4 cycles of this, it will eventually work perfect for the entire day. I have replaced the Sensor that is on bottom front of the unit in the water trough. ( I replace the sensor to the right if you are looking at the un


Q have your run a descaler . to rid the machine of its deposits . in order for the machine to run properly the parts and pump / screens must be clean . / descaling for deliming . dishwasher and icemakers is comm ... Hobart LXIC-6 Dishwasher

E4 error light comes on, dishwasher won't run, this apparently means water is on a sensor, have removed water from collection tray in bottom, tilted machine backward to dry out sensor, left for 24 hours, machine still won't run. Currently a very small new counter top but a useless dishwasher.


The problem is related to the floater assembly inside the dishwasher. It is filling up with gunk and stop working properly. I found out the hard way after a good spill. The solution is easy but takes a bit of time.1. Unplug the power and water h ... Danby DDW497W 22 in. Countertop Dishwasher

Optical water indicator (Turbidity Sensor) failure - FA error code


... Dishwashers

Temperature sensor failed error code kitchenaid KUDD01DSSS


... KitchenAid KUDD01DSSS Built-in Dishwasher

Im getting error 205 in a Meiko DV 80.2. Is there any posibility to solve it fast? Is it related to the temperature sensor? Thanks for your help.


... Meiko DV 80.2 Dishwasher

My asko d3250 thinks the drain hose is blocked. but when i pour water in the dishwasher to see if the water is being drained, the dishwasher is draining properly. Yet the dishwasher after it has drained the water, will shutoff and start flashing the Large Pot icon (drain hose is blocked error code). Is there a sensor that is faulty?


Yes, it sounds like it is to me. I'm not able to pull your model up on my data base,if I could I would be able to tell you where it is located. I would assume that it's located either inside the pump or close to it. Sorry I couldn't be more help. ... Asko Dishwashers

Hobart lx30h replaced all sensors and have no more error codes but the machine says fill but never fills and wont turn on wash cause it thinks its filling...any advice?


Are you sure that you have all the connections rights? Did you check the voltage at the water fill solenoid? ... Dishwashers

My Samsung dmt300 had an leak on the outside hose with water coming out every where. I shut off water and fixed the leak. When I turned on the dishwasher a blinking heavy lite button came on. This error code means leakage How do I reset the sensor. The dishwasher worked fine before the outside leak .Please help, I don't want to call a repair person!


... Dishwashers

My hobart am15 display a p3 error code and i make some test and i didn't have power who goes out of the lectronic car to the tempereture control andthe protection hight limit what sensor do that. Sorry for my englis Larry.


... Hobart 29 in. AM15-1 Free-Standing Dishwasher

On my bosch shu66 diswasher the error code indicates a number 1, aqua sensor I think. There is a screw missing in the soap dispensor and it's been letting water into the door interior. could this be repaired by replacement of the screw and drying out the interior insulation and wiring


As long as it is sealed and you should also make sure there is not water in the white plastic pan under the dishwasher.. ... Bosch 24 in. SHU43 Built-in Dishwasher

I have a hobart lxi dishwasher that has an e7 error code and it dry fires the sump heater between wash and rinse cycle, which seems to have a long delay. we swapped the main board and also the sensors in back and it did not change anything.


... Dishwashers

My question is this: once the flood activation switch (F1 error code) has been activated due to water in the tray, will the switch self-set once the lower board area has dried sufficiently, or does it require a board replacement? I have found (I think), and will be correcting the leak, but wanted to make sure the water sensor is healthy or not.


Hi\015\012\015\012\015\012Thanks for using FixYa. You are right, F1\015\012error means that the flood switch has been activated. You’ll need to res ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Danby Silhouette Model DDW1806BSL receiving error E3, I have ordered element, temp sensor, how do I replace these?


... Danby Dishwashers

Samsung Dishwasher can drain, but gives "drain error"


Sounds like it could be those same water level sensors you worked on before. Only now its telling the thing that there is water still standing in the unit. Try cleaning those sensors again and I know this sounds obvious but check all your conections. ... Samsung DMT400RHS Builtin Dishwasher

OE error code


... Samsung DMT800RHS Dishwasher

SB925 won't start wash cycle, error code i30 (overfill)


... Westinghouse Dishwashers

LG 5811 Error Code


The most likely cause of this is the control panel circuit board has failed, to replace it remove all the screws that hold the door halves together take them apart and the panel is sandwiched between them, the p ... LG 24 in. LDS 5811 Built-in Dishwasher

Pan Moisture Sensor Disconnect


... Viking Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0465 seconds