Having problems with your Hobart Dishwashers ?

It's taking our very old AM6 sanitizer to warm up to temp between uses (up to an hour). We believe it's the heating element. If that's the case, does anyone know where to source another one.

Answers :

Just boil water on the gas (hopefully) stove, and pour it in. (if the thermometer still works) don't put in more than really needed.
Repair Help & Product Troubleshooting for Hobart Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

It's taking our very old AM6 sanitizer to warm up to temp between uses (up to an hour). We believe it's the heating element. If that's the case, does anyone know where to source another one.

Just boil water on the gas (hopefully) stove, and pour it in. (if the thermometer still works) don't put in more than really needed. ... Hobart Dishwashers

HOD6615 Vision one dishwasher - water is not heated, errors after 15-20 mins. Element seems to meter out ok, is this more likely to be the safety switch or control panel, any tests to prove. Could anyone tell me what part the safety switch plays in element connection.

... Hoover Dishwashers

Dishwasher zdt 6053 Heating element not working......sometimes!!!! tried all three cicles nothing, heating element not working then its fine again for a couple of washes ????? anyone ever come across this problem, faulty thermostat ,faulty heating element,gremlin in the circuit board?????

... Zanussi 23 in. ZDT6252 Built-in Dishwasher

I have a Maytag Model MDB7130AWW and it appears the water is not heating up. I am getting white stuff on the dishes. How do I tell if this is a bad heating element, how do I order one, how much does it cost, and can I install it myself? If I can install the heating element myself, is their a repair guide to follow? My email is [email protected]

\012 \012Hi,Check your heating element.. \012A bad heating element causes many problems in dishwashers…Dishwasher Problems The ... Maytag MDB5100A Dishwasher

Our DWF34 is leaving residue on some items (usually the ones which have had mag or oil on. Plus glasses, plastics are not dry at end. I have interrupted the wash a few times and found that there seems to be no heat anymore. Presume the element has gone. Is there one for water heating and one for drying? Thanks

Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... Hotpoint 24 in. DWF34 Built-in Dishwasher

Our dishwasher was taking in water, circulating it but not heating it up or moving through the cycle. My husband took the control panel off and there were some scorch marks on it so we got a new one. He replaced the control panel and the dishwasher went fine for one night. It heated up and washed everything perfectly. The next day when we put it on it was back to square one plus the lights on the control panel are now not working. Just wondered if anyone has any idea what we could do or are

Yes it's time to visit the dump ... Siemens 24 in. SE64A630GB Built-In Dishwasher

Kenmore ultra wash 665 dishwasher heating element melted down in one corner

... Dishwashers

Kenmore ultra wash 665 dishwasher heating element melted down in one corner

... Frigidaire 24 in. FDB510LC Free-standing Dishwasher

Hey, bosch sgs43a18gb/27 dishwasher not heating the water and hence the cycles take ages. ive read that plugging it into the hot water feed is not recomended, so is there a fuse on the element i can test? if not im assuming the element has gone in which case the washer is scrap as an element is £100 cheers

Hi,OK there is a NTC (temperature sensor) which is near the heater in the sump unit.Meter it out and check the wiring. You should get a reading in Kohms.But to be honest i have never replaced 1 of these on these m ... Dishwashers

Miele Dishwasher G579 TurboTheremic is not heating up ? Theres no visable sign of damage to element could it be something else thats stopping it heating up /?

Change heating element .Replace fuse.Push Reset button ,, the red one .. ... Dishwashers

My electolux dishlex 403 dishwasher is not heating or drying. Does anyone know if it has a heating element and if so do you need a servicman to fit it?

... Dishwashers

DWF614SS not heating water, flow through heating element has been replaced and tested but still no hot water. Do I need to check the thermostat, if so, where is this located? Thanks for any help with this one. Owen.

... Smeg 24 in. DWF614SS Stainless Steel Free-standing Dishwasher

I have an Ariston LI45. The stupid thin one. It's not seen much work & is just out of Guarantee. It's stopped working & is showing 2 flashing lights. Stops partway in to a cycle with water in the base, but not enough to cover the element. Tried re-setting, no difference. I have also noticed that it's melted a plastic wheel off the bottom tray at the back. After reading problems with other washers, i'm guessing the water level switch & maybe element too. If this is the case, i'm ok finding the

... Dishwashers

Dishwasher heating element is charred and discolored on one side. Dishwasher is not turning on. Can it just be replaced or are there other elements that could be affected by this.

... Dishwashers

Table top Can the heating element be adjusted on this model? It heats the water at a higher temperature than my portable one. Would like to turn down the temperature setting some.

... Haier 17 in. HDT18PA Built-In Dishwasher

I have a diplomat adp8332 integrated dishwasher showing an F3 fault code.I dismantled the door casing and found that the wiring sheath had split and cut through 2 wires.I have repaired the wires and fitted a new sheath,the F3fault code still appears(no heated water and only rinse cycle)Could the PCB have part blown or the heating element?

... Dishwashers

We have an AM-14 dishwasher. It now will not work on auto. It would sometimes and then not and now only on manual. We have had a couple people in to look at it. One says the main board was bad, so it was replaced and the problem continues. The board that was removed was put into another washer and it worked ok. We were told then that that a wire from the motor was wrong and thats when we called in another person. That person said the board was bad and they couldn't work on it. We are in Lancaste

... Hobart AM14-253 Free-standing Dishwasher

Hi silverdragon, re the dishlex 302 not heating or drying Have replaced heating element but unfortunately still cold. If the control panel has not shorted which it hadn't before, do you have any suggestions. My hubby would rather wait before buying a new dishwasher, but I don't want to throw good money after bad. Is there anyone you can suggest who would be able to check out the circuit board to see if i have missed anything.

Hi\015\012\015\012Check the two thermostats located at the inside bottom front\015\012panel of the dishwasher, if any one of them goes bad it won't heat. Hope this\015\012helps...please post back for further assistance.\015\012\015\ ... Dishwashers

I have a dishlex global 270 i cant find a model no i only have a serial and manufacturers no. What i wanted to find out is does this model have an element that heats the water. I only have one hose and when i used it with cold water it didnt heat up so i am using hot water.

Hi\015\012\015\012\015\012Thanks for using FixYa. I hope you understand that no one can tell you what are the specifications of the product until you provide the model no# however, dishlex usually have element in their dishwa ... Dishwashers

Our SB915WJ doesn't heat water though the heating element is ok, I checked with my multimeter. Is there a mains relay or something i need to change in the circuitry to fix this problem? Does anyone out there have a service manual you can email me? Also the fan drier isn't working, also the relay that is supposed to flip open the soap dispenser doesn't work. The unit is only eighteen months old. I'm not impressed with it's working life.


I have a Bosch Classixx SGS43CO2GB which is working but not heating the water or drying? Is this something I can fix myself, and if so where could I get another heating element? THanks

... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

Dishwasher malfunction I have a Kenmore Ultra Wash Quiet Guard 3 dishwasher. One day, I found it with a blinking green ?clean? light. I went online to search for the manual, almost impossible to locate. Found a website where another using said to hit a 4 button sequence of ?heated dry? ?normal wash? ?heated dry? and normal wash. After this sequence, all lights went on and something that looked almost like a ?demo? sequence began (not sure now what that was). I hit ?cancel/drain? and it proceeded

Hi,The flashing light indicates that the control did not sense a 3 degree temperature rise with an 8 minute test. There are many reasons this could happen with a working heater. I put together a page that shows the reasons and you might b ... Kenmore 24 in. 15689 Built-in Dishwasher

DWI612C wash cycle runs on and on and on. Believing to be a problem with water heating I tried putting a couple large pan fulls of boiling water into machine during wash cycle and this did move it on from wash to rinse. How do I replace the heating element I cant see it it is not in the dish washing compartment? I dont want to call out a repair agent as one can probably buy a new machine for what that will cost. Thank you.

... Smeg 24 in. DWI612 Built-in Dishwasher

GE PDW9700 - Heating Element turns on by itself and Burns my dishes

Have experienced this problem on some zanussi machines. what is happening is that the machine continues thro cycle thinking there is water in machine when there is not. can be caused by:slow pump rate caused by blockage especially near the drai ... GE Profile PDW8400J Built-in Dishwasher


I believe its pressing heated dry, normal, heated dry, normal keys withing 6 seconds. There should be a tech sheet attached to the toe panel at the bottom front of the machine. ... Whirlpool 24 in. GU3200XTP Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0984 seconds