Having problems with your Hotpoint 24 in. FDW60 Free-standing Dishwasher ?

FDW 60 lights 4 and 5 flashin.Select programme,m/c then bleeps 4 times and then lights 4 and 5 flas together and nothing else happens!Any ideas please?

\015 Lights 4 and 5 flashing on my aquarius fdw60.Machine bleeps 4 times then these two lights flash.M/C appears to drain then nothing else happens.Any ideas please?\015

Answers :

Control panel which is a bit sensitive might need re-booting. Mine did the same and had a mind of its own, doing what it wanted, lights flashing all over the place, not completing the wash etc etc.
\015\012Switch off the machine and unplug from the mains. Leave for 10 minutes.
\015\012Plug back in, switch the machine on to your required programme and if ,like me, you are lucky, your machine should work again. If it happens again in the future you know what to do. Failing that go to the Hotpoint website, find the customer service number and ask if there is anything else you can do yourself to solve the problem, before paying for a service call. They are really helpful
Repair Help & Product Troubleshooting for Hotpoint 24 in. FDW60 Free-standing Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

FDW 60 lights 4 and 5 flashin.Select programme,m/c then bleeps 4 times and then lights 4 and 5 flas together and nothing else happens!Any ideas please?

Control panel which is a bit sensitive might need re-booting. Mine did the same and had a mind of its own, doing what it wanted, lights flashing all over the place, not completing the wash etc etc.\015\012Switch off the machine and unplug from ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

The glass xpress light on my Whirlpool GU 2400, Quiet Partner III, is flashing. I tried alternating the sani rinse and heated dry buttons, and alternating hi-temp wash and heated dry---nothing changed. None of the option buttons light up when they are pushed. and the time remaining stays on -- (two dashes), the dashes don't move. Any other ideas?? PLEASE

... Whirlpool GU2400XTP Built-in Dishwasher

Hi my lamona hja 8362 has all its programme lights illuminated when I switch the power button on and does nothing else, any ideas please?

... Dishwashers

Hi I have a fav44050vi intergrated dishwasher and all 4 lights on the door panel flash all the time and it wont do anything else any ideas please

... AEG 24 in. Favorit 44050 Built-in Dishwasher

I have a whirlpool dishwasher thats a quiet partner 2. the cancel drain light keeps blinking and nothing else is happening. i try to unlock it and then the normal light starts blinking also and still nothing happens. i called a local repair shop and they said i need to change the control board so i did and its still does the same thing. can you give me an idea of where i need to start to fix my problem?

Can you here the pump running or check to make sure there is no water in the base... ... Dishwashers

I have a KitchenAid Dishwasher KUDIO1iLBS2 and none of the lights come on and if I press any of the buttons nothing happens. The unit is getting power to it as I shocked myself. I did ordered and replaced the control board and still nothing is happening. Any suggestions or ideas? Is there a reset button or is there a possible fuse that is out that would make the lights not come on? Please help.

... KitchenAid Dishwashers

I have a bosch SHU8815UC dishwasher. It was already installed when i moved into my apartment - so I'm unsure of the age. The dishwasher isn't functioning. When I open the door, the "Clean" light and the PowerScrub button are red. When i close the door, the light go off but nothing happens. One time I closed the door, it started to rev up but would shut off and beep three times after about 1 min. No water comes out. Any ideas? Thanks! June

... Dishwashers

4 years old with light use.fills with water.house fuse blows.reset house fuse & blows every time the door is closed.have striped to a point & can run the mashine if i disconnect the red wire to the heater element.it then fills & will not move on & obviously will not heat.heater element is expensive & looks time consuming to replace. ntc,thermostat,programmer or element ? some ideas or tests please

... Neff 24 in. S5457X0GB Built-in Dishwasher

I have a smeg free standing dishwasher model df612sdx you turn it on and it bleeps once with a green light on one of the programs. If you push the p button nothing happens along with the start button. If you turn it off and on a few times the program light moves and occassionly it will start then stop a few mins later. Any ideas. Thanks

Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. This issue can be either due to a faulty door latch or\015\012door lock switch which is not engaging its ... Dishwashers

I have a kitchenaid kemc308kss04 power went out to house now no lights on control panel or not does the panel work. Light in me comes on but nothing else works. Checked breakers works. Any idea?

... Dishwashers

Elite 665.13933K010 The touch panel is inactive. There appears to be no power to it. It has done this before twice...the first time I bumped the top of the door and the lights came on and it worked. Second time, I took it out of the cabinet, turned it upside down and examined everything looking for a loose wire or blown fuse. When I put it back together it worked. Any idea what is happening?

... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

The "clean" light blinks 8 times, then there is a pause, then it blinks once. The dishes are clean but not dry, as if it has not completed the drying cycle. We had an engineer out to fix it who said it was the circuit board and that the blinking light code indicated "too much suds", he replaced the circuit board, but it didn't make any difference. It's an intermittent problem: sometimes the machine completes its cycle OK. I ran it with just vinegar and nothing else in (no detergent, no dishe

... Kenmore Dishwashers

Have whirlpool gold dishwasher made in Mexico, the control lock light stays on, when i push it and hold it just blinks three times and then stays on steady and then does the same over and over, before it did this I noticed the lights for different cycles flashing randomly, and even pushing cancel button once in a while would start the machine up....I have tried to unplug the machine and then plug back in, but nothing is helping....any ideas??

... Whirlpool Dishwashers

My kitchenaid dishwasher quit working, the hi temp scrub and heat dry buttons light up but nothing else does. The dishwasher makes no sounds and doesn't even try to turn on so I tried bypassing the thermal fuse, safety latch, and replaced the motherboard so to speak and still nothing so PLEASE HELP!?!

... Dishwashers

I have a Miele Dishwasher 2430 Sci. It's been not used for 5 months and when I returned it worked fine for several times (at least 6). NOW the intake/drain light keeps blinking. I have already cleaned out the drain and replaced it properly (there was nothing in there and it was clean). No water is coming into the dishwasher?however I know that the water hook-up is on (the first thing I checked). I turned the water on and off several times and AM SURE it's on now. What else could be

The usual course of events is to check and clean the filter, check and clean the water pump and well, check and clean the waste pipe and any connection to a sink or waste disposal system, then check the inlet warer pressure, then the machine level / ... Miele G2430SCi Dishwasher

I have a 10 year old Electrolux Dishlex Global 300. It doesn't complete a cycle, beeps many times then all lights go off and it stops. Then you cannot select a program to restart. It then beeps consistently throughout the day when not even in use. A repairman has tried adjusting electric wire connections, the door handle and checked for motherboard diagnostic faults (which shows nothing). Any ideas?

Hi mndl, it sounds like what happened to mine, it was the flood switch F1good luck slappa ... Dishwashers

The flashing light blinks 7 times on the clean indicator area , but the dishwasher will not function and when you press cancel it starts running but nothing washes through any cycle at all. please help

Ok well usually it is not sensing a temperature change in the water or\015\012not getting hot enough. so you can reset the dishwasher and try running\015\012the hot water in the sink before starting the dishwasher. if it fails\015\012again there is a ... KitchenAid Dishwashers

I have a 17029 Kenmore Ultrawash Quietguard, type 575-D. It is only a few years old and suddenly the clean light will not go off and I can not do anything with the unit. It went through it's wash cycle yesterday fine , then the next time I used it the "cleaned" loght came on and that is where I am at. Please give me some troubleshooting ideas. Thank you

... Kenmore 24 in. 17029 Built-in Dishwasher

I have a Maytag dishwasher model number MDBTT60AWW. The #3 light on the control panel stays on and nothing else works. Any idea what the problem could be?

... Maytag Dishwashers


Normal\012 0\012 \012 \012 \012 \012 \012 \012 MicrosoftInternetExplorer4\012 \012\012\012\012\012\012 /* Style Definitions */\012 table.MsoNormalTable\012\011{mso-style-name:"Table Normal";\012\011mso-tstyle-rowband-size:0;\012\011mso-ts ... Hoover Dishwashers

Danby DDW1802W - Dishwasher stopped dead in the middle of wash cycle. Lights are on, but absolutely nothing else is happening. Help, please.

... Danby DDW1802W Built-in Dishwasher

Hi i have a smeg df 410 sdx 450 wide dishwasher that is coming up to three years old ,the fault it has developed is that it wont switch on ,press the button and nothing happens,no lights or the normal beep.240v is getting to the button and when the button is pushed on 240v comes out the other side and goes to the various pcb's but the appliance wont do any thing,can you please give me some ideas.

... Dishwashers

I have a maytag dishwasher mdb5601awb. when I hit the start button nothing happens. I have found the instructions to do a manual test which is hitting the heated dry button 5 times and then the start button. Thinking it will run some test which I have no idea what to look for, it actually runs the machine's wash cycles and clean, dries and tells me it clean with the green light goes on. How do I reset/reboot the machine so it starts by just hitting the start button again?

... Maytag Dishwashers

Bosch aquasensor I have just had a plumber install a second hand dishwasher as above, he left after he heard the water coming in, two mins after it stopped and nothing else happened bar the time still going, he has plumbed it into the cold water, is this correct or am I doing something wrong. Please help, thanks

No it should be plumbed into the hot side... it will not wash untill the water is hot enough ... ... Bosch 24 in. SHU43 Built-in Dishwasher

Hi my Tecnik DW2677 repeatedly beeps at the end of (or sometimes during) it's cycle. I have to open the dishwasher door to stop the beeping noise, but then the light on the "START" button flashes 4 times over and over again. Any ideas please?

... Tecnik TDW2677 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1048 seconds