Having problems with your Kenmore Dishwashers ?

Problem - Continuous Blinking LED in DELAY HOURS 4 and no other keys function except CANCEL/DRAIN.

\015 Kenmore Elite Ultra HE - 665.1315K701\015\012Problem - Continuous Blinking LED in DELAY HOURS 4 and no other keys function except CANCEL/DRAIN.\015\012Noticed water in base of tub when doing dishes, so prior to selecting a new cycle I simply hit the CANCEL/DRAIN button. The pump worked and emptied the tub basin. When it stopped I tried to set up a new cycle and no response from any button but the CANCE:/DRAIN. Now power cycling the device makes the DELAY HOURS 4 LED blink continuously. The CANCEL/DRAIN button will stop the LED, but then all is dark and no response.\015

Answers :

Repair Help & Product Troubleshooting for Kenmore Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Problem - Continuous Blinking LED in DELAY HOURS 4 and no other keys function except CANCEL/DRAIN.

... Kenmore Dishwashers

Model no. MDB6100AWW. Just unloaded the dishwasher. Shut the door and immediately heard clicking (regular cadence). All indicator lights (arrow-shaped) for clean, dry, wash and heating delay were blinking. Opened the door, waited a few minutes, closed the door. Now, just the "Clean" and "6 Hour" arrow indicator lights and "Heated Dry" button light indicator are still blinking continuously. Cannot override. What's going on? Dishwasher came with the house when we purchased it 6 years ago. Proba

Hi Thanks for using FixYa. To resolve this you will have to reset the console. Do this by closing the door and press these buttons in sequence...-high temp wash-heated dry ... Maytag 24 in. MDB6100A Built-in Dishwasher

I have a Maytag dishwasher model MDBTT60AWW. None of its wash modes will work when pressing their respective buttons. The Fields Service Test functioned normally with the exception of the "heated dry" and "sanitize" LEDs not being lit. Tried to perform the Manual Function Test, but none of the components would operate upon pressing the respective keys for testing their operation.

Hi, \015\012Sounds like either the control board or the keypad.Try removing power from the unit to see if it will reset.\015\012Now try running the diagnostics…RIBBON CABLE CLEANING ... Maytag 24 in. MDBH955AW Built-in Dishwasher

I have a Kenmore 665.16039401. The 3 right hand buttons on the keypad; Delay Hours, Cancel/Drain and Start/Resume do not respond and I cannot start the washer. Doing the self-diagnostic test by pressing "Heated Dry - Normal Wash - Heated Dry - Normal Wash" results in all of the LED's lighting and the washer starting a full 20 minute self-test cycle in which all functions seems to work properly. Opening and closing the door during this testing stops and then re-starts the washer appropriately

... Dishwashers

I just purchased and installed an Haier ESD 210 dishwasher. Everything seems to work fine except the machine will not shut off. Also, after selecting the "wash program" the LED blinks continually during all cycles. It takes some effort to latch the door but it does lock. Can you help? Thank you. Joel Miller ([email protected])

This can be caused by water temperature.\015\012Please Make sure that the water supplied to the unit is 120 degrees or higher.\015\012This can be checked on the hot water heater thermostat setting. ... Haier Dishwashers

Have Whirlpool dishwasher Gold Series, Model GU9805CGB1 which stops part way through wash cycle with the led indicator blinks on the normal cycle.....if we ope nthe door and shut ...it continues until part way through rinse cycle...stops again....led indicator blinks again.....we open the door & shut and it continues....but then continues to run through the normal wash cycle continuously.....until we open the door again.....what's wrong???

Sounds like the door is losing contact with the door switch, first thing i would check is the door strike.Metal strike plate located on the tub itself that the door latch catches as it closes. its a spring metal striker, i would try bending it down ... Dishwashers

Kudl03fv883 The dishwasher will not start. When I press the Start button, the green LED comes on, but then starts to blink within a few seconds. I close the door, but the dishwasher does not start. The Start LED just continues to blink.

... KitchenAid Dishwashers


... Dishwashers

Kenmore Ultra Wash Dishwasher Model 665.15779 LOCK ON light blinking on control panel, unable to use washer. If buttons were locked, LOCK ON light should be lit continually not flashing. If you press and hold NO HEAT DRY button to disengage lock, nothing happens. If you press the CANCEL button it begins to blink in unison with the LOCK ON light. How can I stop the light from blinking to allow button function again?

... Kenmore Dishwashers

My dishwasher is locked. The 4 hour delay hour keeps flashing. We have pressed the drain cancel key and nothing happens.

... Whirlpool 24 in. DU915PWP Built-in Dishwasher

Hobart lx18h Our commercial Hobart dishwaser stops working after running a few cycles. After pressing start the LED display will continually blink and nothing will happen. We'll turn it off and on again a few times to reset it and it will start up again eventually. We've had an appliance guy look at it multiple times. He's replaced a part or two for it but the problem continues and he isn't much help. Anyone else had any similar issues with this model of dishwasher?

... Dishwashers

Dishwasher has 2 blinking lights. 6 hour delay and the hi water temp wash. When I close and lock the door, they go out. Why are they blinking? Thanks

Www.youtube.com/watch?v=kO2eZNP8FCk -\015\012\015\012\015\012\015\012Yes, usually when you see the buttons flashing like that its a control board issue. ... Frigidaire Dishwashers

I have a Viking Professional dishwasher that is about 5 years old. When I use the delay function, it seems to delay starting the dishwasher for about 12 hours. Is this correct?

Please check the user guide. There may be settings available like sleep timer in TV sets. ... Viking 24 in. Professional Series VUD040 Stainless Steel (Premium) Built-in Dishwasher

I have a whirlpool quiet partner i dishwasher (model DU1055XTSQ2) that has suddenly stopped working. Control panel has partial functionality. All of the buttons on the control panel have a green LED feedback light when depressed. None of them provide LED feedback anymore except the Hi-Temp Wash, Sani-Rinse, and Heated Dry buttons. So there is power to the dishwasher. Any ideas? Please help Scott

The control board has failed.CLICK HERE to see the parts breakdown. ... Whirlpool DU1055XTSQ Built-in Dishwasher

Why does the timer function on the DF62 not work. i simply turn the timer to 4 hour delay and set the washer to come on but when the time arrives it doesn't click on

... Hotpoint Dishwashers

Pots/pans and normal cycle lights flash alternatly...soak/scour light on continuously. dishwasher does not work at all. did disconnect power for 12 hour. lights come back on flashing, still no function.

... Whirlpool DU1055XT 24 in Builtin Dishwasher

Frigidaire dishwasher does not start. but i see the cycle select LED light come on . all of a sudden the dishwasher stopped working. all buttons except the "start" work. i can select 'normal', 'pots n pans', select the delay etc, but the START button will simply not work!

... Frigidaire 24 in. FDBB945DC Stainless Steel Built-in Dishwasher

The dw is blocked with the three led of delay start blinking in sequence. I think that i have to reset the dw, but i lost the manual. Please, could you suggest me in which way i can solve my problem? Thank you!

Hold the start button for about 3 seconds and the blinking led will stop that should help ... AEG 24 in. Favorit 86050Vi Built-in Dishwasher

Kitchenaid model kudso1dl rinse only and add a dish light continue blink. dishwasher will not function

Hi,Before we proceed, I would like to Know that How many Blinks are there? Then, is that Clean light that is blinking? What is the Label on that Light?Let me know, so that we could Proceed.Hope i helped ... KitchenAid 24 in. KUDS01DLSS Built-in Dishwasher

Normal wash led light stays on blinking other function dnt work

... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

Kenmore Dishwasher model # 665.16602300 Control panel push buttons do not function except cancel and delay buttons. No other buttons work at all. Thanks for help in advance Rich Bussmann

... Kenmore 16602 / 16604 / 16609 Built-in Dishwasher

Whirlpool GU1500XTKT0 dishwasher has a Rinse only led blinking. No functions are responding on the control panel. Keyswitch resistance check table on Whirlpool Service Technician's Tech Sheet checks good with digital multimeter. Door switches and thermal fuse near control module check good.

If your keypad tests, door switches, and thermal fuse are all good, the only test left is to make sure you are getting 120 volts at your control board. Test for 120 volts at terminals p8 and p7, and at p2-6 and p7. You will have to activate the doo ... Dishwashers

We have a Bosch SHX43C05UC/40 dishwasher. It did not come with a user manual and I cannot seem to find one online. The dishwasher is great in all aspects except I do not know how to disable the beeping alarm at the end of a cycle. It continues to beep for hours on end until the door is opened. Does anyone know how to disable the alarm? Thanks,

... Dishwashers

DU1145XTP The buttons don't all work--for a while the normal wash and heated dry were the only functions that worked--now the start button doesn't work. I took the panel off and clicked the door switch and held it and got all the cycle buttons to light up except rinse only and only heated dry in the cycles would light up. The delay buttons don't work and neither does start. Also the panel seems hot.

You need to replace the circuit board inside the machine, technically it is possible for you to do it, how long have you had the machine, if it is under warranty you can have it serviced without any cost or less cost to you contact Whirlpool ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

Two LEDs continuously blinking on front panel. Will not reset when "cancel" button is pushed. Will not respond to any buttons pushed on front panel. What to do? Thank you.

Sound like you have a bad touch panel. replace your touch panel and this should solve your problem ... Kenmore 24 in. 15932 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0522 seconds