Having problems with your KitchenAid 23 in. KUDD01DPPA Stainless Steel Dishwasher ?

My Kitchen Aid's upper drawer keeps turning off mid cycle and beeping red. I push the start button again sometimes several times a load. The dishes come out fine but this is a hassle!

\015 I'm not sure of the model #. The machine is approx. 7 or 8 years old.\015

Answers :

Repair Help & Product Troubleshooting for KitchenAid 23 in. KUDD01DPPA Stainless Steel Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Kitchen Aid's upper drawer keeps turning off mid cycle and beeping red. I push the start button again sometimes several times a load. The dishes come out fine but this is a hassle!


... KitchenAid 23 in. KUDD01DPPA Stainless Steel Dishwasher

Not washing Dishwasher was working fine until two days ago. Now it comes on and you hear the water but it only fills up a little in the bottom. Ran the entire cycle and checked several times the dishes never got wet.


Hi,\015\012\015\012There are a couple of things to check:\015\012\015\012Some of the first things to check would be, did the water accidentally get turned off to the dishwasher? You need a volt meter to check for voltage at th ... Frigidaire 24 in. FDB1050RE Built-in Dishwasher

Hi, our new home us the KUDP02CR Built-in and we have two issues: 1) dishes on top and bottom are coming out dirty; unless we scrub very food particle of dishes and cutlery they just won't come out clean. Either food is baked on or cutlery/glasses/plates have a cloudy residue 2) the soap dispenser doesn't always open; we've tried cleaning it ourselves but to no avail. Sometimes it opens, sometimes it leaks out the liquid and other times it's still shut . Any help would be great. We've tried


Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... KitchenAid 24 in. KUDP02CR Built-in Dishwasher

I have a Miele Dishwasher 2430 Sci. It's been not used for 5 months and when I returned it worked fine for several times (at least 6). NOW the intake/drain light keeps blinking. I have already cleaned out the drain and replaced it properly (there was nothing in there and it was clean). No water is coming into the dishwasher?however I know that the water hook-up is on (the first thing I checked). I turned the water on and off several times and AM SURE it's on now. What else could be


The usual course of events is to check and clean the filter, check and clean the water pump and well, check and clean the waste pipe and any connection to a sink or waste disposal system, then check the inlet warer pressure, then the machine level / ... Miele G2430SCi Dishwasher

Gritty dishes My dishes are coming out of the wash gritty. It is as if food has been dried on them. As if the rinse water has particles in it and then they are left on every dish. I have used a dishwasher cleaner several times and I also use the rinse agent in the machine. Nothing is helping. It is getting worse.The inside of the dishwasher. mostly on the top, usually has food residue all over it at the end of every wash. Even the machine is dirty. I'm hand washing everything right now. Any


... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Control Panel is stuck in Pots and Pans. Sometimes I have to hit the start button several times for it to work. When it does start washing the lights that come on are non sensical to the cycle. The drying light comes on immediately but I know it is washing.


It would be helpful to have the make and the full model number of the dishwasher.\015\012\015\012Looks like a problem with the keypad. Moisture etc. Might be as simple as opening up and running a hair dryer or could invovle a replacement. ... Dishwashers

In our church one of our dishwashers is a model WM5H. Sometimes it will work fine. Other times the light never comes on. I have had two service calls and it works fine while they are there.


The door switch, by door hinge, resets the timer for the next cycle. The door needs to stay open for about 8 seconds to complete the reset. \015\012\015\012There is also a switch inside the door at the handle. This can cause a similar ... Dishwashers

I have a Kenmore model 665. It is having an intermittent problem. It goes through the fill cycle, and then stops. Timer does not progress either. Then, at some random moment, it will come back on and finish the entire cycle. This could even be a day or two later. Sometimes it seems a nearby thump will set it off, other times no one is anywhere near it when it comes back on. This happened for a month or so off and on 6 months ago, and then it worked fine for 6 months. Now it's back to it.


Its possible its a door switch thats causing this or the main wire is loose..be careful as you do have 115 volts. i'd turn off power and check where power comes into d/.w and make sure the wire nuts are tight.. the next step is a little more difficul ... Dishwashers

Have to hand wash dishes before and after dishwasher does not clean anything. Food just stays on dishes and glasses come out bad. Use the rinse and have cleaned it with the cleaning solution several times. Works a little better for a day or 2 after cleaning


Suggest you check the salt level. Also open the door part way through a wash cycle (after only opening a small amouny first) to ensure that water being dispersed around compartment correctly ... Dishwashers

My zanussi zdf131 has not caused any problems during the last year or so since i purcheased it, but now all the dishes etc come out with a "bloom" of white over everything. I've checked all filters etc, run several cleaning programmes but I've now noticed that the salt level does not seem to be going down. I check it every week & refil but this time the salt has been in the reservoir for several weeks & doesn't seem to have changed - could this cause the problem & if so why is the salt level not


... Zanussi Dishwashers

My dishwasher emits a dead animal smell immediately after filling. I have a 20-year-old KitchenAid KUDS220T3 dishwasher. The racks are a little corroded, but it still cleans dishes just fine. About two months ago, it started smelling like a dead animal immediately after the dishwasher fills with hot water, during the time the water is being heated, but before agitation begins. The smell appears to be coming from around the door. If I open the door, everything inside the dishwasher smells fine.


This vent that you are describing is to allow air to flow in for the heat/dry cycle. Some times little creatures want to "mark" their territory by "spraying". Spray some type of cleaner like ammonia into it and **** it out with vacuum a few times. Mo ... KitchenAid Dishwashers

We discovered broken glass dish in bottom of dishwasher with some pieces below the bottom pump area. Shortly after the washer is making a louder noise during operation time. The water pump is quite when filling but after fill the noise comes during the wash time. The heat element works fine. What can be done to quite the wash cycle????


Sounds like you have broken glass in the wash pump you will have to remove pump from sump and clear also check the drain pump.good luck let me know how it goes ... KitchenAid KUDK03ITBK Built-in Dishwasher

My dishwasher recently started leaving a white, chalky residue on all the dishes. It wasn't gradual at all. One day everything was fine and all the dishes clean and the next they were covered in nasty residue. We've ruled out any issues with soap, rinse agents and hard water. A appliance repair guy came out and said the float was "tampered" with and said that he fixed it. He said that if the problem came back we need to order a new float assembly kit. My husband has looked at it several times an


Hi, \012I have an older dishwasher also and recently my wife alsocomplained about it not cleaning right... so me being the man I am tried invain to clean the things... Bought new spray arms online and installed them inminutes...now the thing works li ... Whirlpool Dishwashers

Dishwasher Stinks Our dishwasher has recently begun to smell like burning rubber when it is running. Still washes the dishes fine, and we pulled it out several times but can find no smoking, smoldering, etc to pinpoint the problem area. Fumes give me a headache. Can anyone help?


Is your dishwasher less than a year old? if so you need to call bosch and have all the gaskets replaced. they tried a new chemical to make the gasket but now have found that after the dry cycle the gaskets put off a strange odor like your discribing. ... Bosch 24 in. SHX99A15UC Stainless Steel Dishwasher

My dishwasher skips the final drain cycle. The lines are all clean and there is no clog. It drains just fine in the beginning of the wash cycle. Every time I do a load of dishes I have to run the full cycle, then leave the machine open for 3-4 hours and start the cycle again and listen for the drain at the beginning of the wash to drain the machine from the initial wash and stop the machine after it is done draining so it won't fill up again. Sometimes we have to unplug it and wait about an hour


... GE Nautilus 24" Built-in Dishwasher

We built a home last August and our appliances are Whirlpool. We were very happy to know that we would be having Whirlpool applicances bacause we've always heard how great they are. But, we have not been pleased with our dishwasher. We called Metro Builders in Tulsa, Ok who provided the dishwasher for our house and asked several times to come check on it because it will not dry our dishes. They told us to just use Jet Dry and that would take care of it. I told them we use Jet Dry and make s


Hey guys, what is the model number of your dishwasher?The people/person that installed it could have wired it wrong.There is also a high limit (saftey device) that has tripped therefore not letting the element heat.As for the refrigerator it sounds l ... Whirlpool Dishwashers

I have the Fridgeadair Dishwasher FDB1502RGS model. It worked fine for several months but now it does not clean or rinse the dishes properly. It does not get hot any more. It used to be that when you open the door after washing is done it was hot and steam would come out. Now it is cold when you open the door. Please advise what the problem might be.


... Frigidaire FDB1502RGS Built-in Dishwasher

Pots/pan light blinks alternately with the normal wash button. Sometimes the cycle will start and then the lights come on. Once they start blinking, the cycle stops and I can't get it to start again. Unplugging it for a few days has worked a few times. But it just keeps getting more frequent. If it does start up, it heats fine and washes perfectly.


... Whirlpool DU1055XTSQ Built-in Dishwasher

I have kenmore dishwasher model no. 665.1371 I'm getting a leak just under the door area the connects to dish washer are good, there is white plastic unit the water line is hook to is dripping from that area but I can't see were it is coming from sometimes it stop on it's own for a couple of weeks and starts up again. Thank you your time


... Kenmore Dishwashers

OE light comes on, sometimes every wash and other times not for several washes. I have checked the lines and they are open.


Check the drain where it connects to the sink. the small t connection... insert screw driver into the hole under the sink... we found it was plugged creating poor drainage. ... LG LDS4821WW 24 in. Built-in Dishwasher

My fisher&paykel 2 double dish washer works just fine no codes come up at but beeps from top one while running and even if it is not in use any time drawer is shut it beeps


If you find the dish wash makes the noise like the draw has been open and its mainly at night you most likely have cockaroaches. The dishdraws have infared sensors to tell it that the draw is open which works like a beam of light. When the beam of li ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

When I press the start/resume control, the dish washer start/resume light blinks 2 to 3 times, then turns-off. then the dish washer beeps several times; however, the dish washer does not start. when turned the breaker switch off and on, and then I press the start/resume control, the dish washer go through a normal wash cycle. The next day when I press the start/resume control, the same thing happens. 2 to 3 blinking lights followed by beeping for several seconds. Dish washer does not start


... KitchenAid KUDC10IXSS Builtin Dishwasher

We have run our dish washer several times, however, the dishes are not getting cleaned. We first ran it on "normal wash." The second and third time we ran it on "pots and pans." Not only are the dishes not getting cleaned, but the soap is hardly getting dissolved. We use liquid dish soap too. I noticed this last time, at the end of the wash, the soap was getting built up on the front-right (when facing the machine) and had turned into a solid clump; almost like plaster. I don't have a manual so


First idea goto your local home depot they make a product called AFFRESH for front load washing machines and dishwashers run this tablet inside your dishwasher with no dishes on the inside on the hotest setting this usually takes out all build up wit ... Dishwashers

We have a built in GE dishwasher. It has worked fine for about 4 years but now the glasses in the top rack will not come clean. I have cleaned all the holes where the water comes out but I think the sprayer that is beneath the top rack (the one that is attached to the bottom of the top rack) is not rotating. We had someone out to take a look at it and they said it was fine. It isn't fine as it is not cleaning the dishes. Is there a reason that the bottom sprayer is not turning?


Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... Maytag Dishwasher

Kenmore washer 8269644 won't start all the time. Sometimes if we hit the cancel/drain button several times and then the start button will will start but the other times we just have to wait several hrs before it will start when we push the start button. Suggestions?


... Kenmore 24 in. 15932 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1459 seconds