Having problems with your KitchenAid 24 in. KUDI02IRBS Stainless Steel Built-in Dishwasher ?

My kitchenaid dishwasher has a bottom rack allignment problem. Especially when it is fully loaded the right rear pair of wheels often slips down off the bottom track and makes rolling the loaded rack fully in very difficult. I've already had a serviceman come out and he sent me a new bottom rack and set of four rollers and that improves the situation but does not eliminate it. Any similar complaints? Any easy fix before I call the service guy again?


Answers :

Hello. If you have a new rack and new wheels the only fix to your problem is to either replace the dishwasher all together or NOT put as many items in the bottom rack. I am always bothered when anyone tells me they were sold a new rack because they are so expensive [usually over one hundred dollars] and generally once the racks start to go, the rest of the dishwasher is not far behind. j.
Repair Help & Product Troubleshooting for KitchenAid 24 in. KUDI02IRBS Stainless Steel Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My kitchenaid dishwasher has a bottom rack allignment problem. Especially when it is fully loaded the right rear pair of wheels often slips down off the bottom track and makes rolling the loaded rack fully in very difficult. I've already had a serviceman come out and he sent me a new bottom rack and set of four rollers and that improves the situation but does not eliminate it. Any similar complaints? Any easy fix before I call the service guy again?


Hello. If you have a new rack and new wheels the only fix to your problem is to either replace the dishwasher all together or NOT put as many items in the bottom rack. I am always bothered when anyone tells me they were sold a new rack because the ... KitchenAid 24 in. KUDI02IRBS Stainless Steel Built-in Dishwasher

I have a three-year-old Sears Kenmore Elite dishwasher. I find that despite the fact that we scrape and rinse our dishes before loading the machine, after each three months of use (two loads a day) or so, I have to take the machine apart (spray tower, racks, bottom impeller, bottom screen housing, food grinder cover) and clean-out the food grinder area, for it fills-up with sludge. The sludge restricts the water flow and there isn't enough flow to turn the impellers via that steering jets.


Have you tried different detergents? Some detergents after getting wet and going through the wash cycle with the debris from the wash turns into a grease substance that grimes up in some dishwashers. Try running the machine with hot water this someti ... Dishwashers

Have dishwasher does not dry dishes fully top rack wet bottom rack semi dry heat ring on bottom is rough not smooth


Hi,Check your heating element.. \012A bad heating element causes many problems in dishwashers…Dishwasher Problems The ... Frigidaire Dishwashers

Plastic Rollers for bottom dish rack in Viking Professional


... Viking 24 in. Professional Series VUD040 Stainless Steel (Premium) Built-in Dishwasher

My dishwasher cleans the bottom rack but doesn't get the top rack clean, and I'm not blocking anything or over loading. Any ideas?


There is a trap in the bottom of the dishwasher. Have you made sue that there is nothing stuck in there or anything blocking from the bottom? ... Dishwashers

Re: Thermador Dishwasher DWHD64E I love the dishwasher as it performs well and quietly. My problem is with the flip tines in the bottom rack. It was a great idea that allows for different configurations when loading dishes BUT the tines do not stay in place. I will load plates, for example, and as I add a plate in the established configuration, the tines move collapsing the entire row of plates. The repositioning notch does not hold up with the weight of the dishes. I prefer the old station


... Thermador DWHD64E Built-in Dishwasher

I have a Whirlpool Gold Quiet Partner III that is 8 years old and recently stopped cleaning top rack dishes. I remember finding a mylar like piece in the bottom of the tub and threw it away thinking it came off of something we washed (I know, bad thinking.) The mylar piece measured roughly 3-4inx2in and was folded in half. Anyways....the upper arm does not spin and the detergent doesnt get fully dispensed so dishes dont get fully cleaned. I am guessing not enough water pressure to upper arm. Wou


I'm having a similar issue. Are you sure the arm isn't moving at all?\015\012\015\012Generally what I'm finding is either you have a clog or the pump motor is bad.\015\012Hear is the service manual.\015\012 ... Dishwashers

After running our dishes through a wash cycle we noticed there was still a lot of food stuck on the plates & glasses etc. We cleaned out the trap but due to the murky water in the well, we also pulled out the racks & removed the bottom plate. The underside was greasy and had a lot of grim stuck to it as well as the bottom of the drawer itself. We washed the filter trap, swing arm and plate in the sink. We loaded it with the dishes that previously did not come clean and ran a full cycle. The


Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

The top rack on my dishwasher won't stay back like it did when it was new. It keeps slidding out making loading the bottom rack difficult. Can I replace the wheels or something else?


... Maytag MDBH985AWB / MDBH985AWS 24 in. Built-in Dishwasher

Dishwasher Racks The dishwasher rack supports for the rollers do not hold when there is any load on them. Do they make new supports to stop this problem?


... Equator SB72 Built-in Dishwasher

My dishwasher stopped cleaning my dishes when it was just under 2 years old. I hadn't changed the type of detergent, or how I loaded/ran it. We have since tried different detergents and different wash cycles to no avail. If I want to use the dishwasher, I must first completely rinse off any food--and I cannot load dishes as tightly as I used to be able to. Yesterday I noticed that a dish in the back left corner--bottom rack was completely untouched---the residue was as if I had put it in the


Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... Whirlpool GU3600XTV Dishwasher

One of the rollers on the bottom rack came off and the clip was lost! Can I glue it on to hold it?


No, the wheels must turn, and the glue will eventually degrade in the dishwasher. You will have to find the appropriate clip and reinstall to make it right again. ... GE 25 in. Nautilus GSC3400J Free-standing Dishwasher

GE Triton model Dishwasher does not drain fully, there is always some water (1") left in the bottom. I have removed the cap over the air gap to see if it was blocked - it does not appear to be. I removed the fileter housing immediately to the rear of the lower spinner and cleared all the junk out. no improvement


Check entire drain including the pump. The pump may have a little debris lodge in it. ... Dishwashers

Bottom rack stopping soap dispenser from openning fully Model #DU810SWLUO


Hi.The bottom rack preventing the soap dispenser from opening is quite unusual. It would mean that either the rack or the dispenser door is not mounted correctly. Inspect both parts. Help yourself with the diagram below.Also e ... Whirlpool Dishwashers

I have a Whirlpool Quiet Partner II model DU1100XTPQ7. The top rack is not clean after the dishwasher runs. We cleaned both sprayers with pipe cleaner & ran water through the lower sprayer with a hose. Then we let the dishwasher soak overnight with a gallon of vinegar in it. After running that through a cycle, we still see no improvement. We do have very hard water here; I add 1/2 cup of vinegar to every load. Any suggestions? Heather


... Whirlpool GU2400XTP Built-in Dishwasher

I am getting a build up of black mold on the inside of the rinseaid compartment and all plastic pieces. Even in the bottom of the utensil basket. This has been happening for the last two months. Once I clean it, it comes back. The dishwasher goes on once a day fully loaded. hope you can help me because its gross. Thank You !


The first problem I believe you have is your hot water entering the unit is NOT hot enough. Turn up the temperature setting on your hot water heater. The water in your pipes should come out around 120 degrees Fahrenheit. That should be hot enough ... Gaggenau GI966-760 Built-in Dishwasher

I have a problem with a white dust on some of the dishes in each load both top and bottom racks and the dust is hard to get off, also with etching and scratching of glassware


Usually a sign of hard water deposits that are baked on when the heat comes on, try running an empty load with C.L.R ... Bosch 24 in. SHU43 Built-in Dishwasher

I have the steam LG Stainless Steel dishwasher it stinks when I open the door (smells funkey)& the inside frame that holds the rubber weather strip has been caught so many times by the roller guide that is wont let me roll the bottom rack in & out anymore without a fight;-(


... LG LDF6810ST Stainless Steel Built-in Dishwasher

Whirlpool Gold Dishwasher - GU2700XTSB The top rack of the dishwasher is not cleaning. The bottom rack dishes clean fine. There are no clogs in either the bottom or top spinner arms, the plastic tube feeding water from the bottom pump to the top rack spinner arm is clean, the spinner arms all rotate freely and do not bind. Water pressure is correct and water temperature is correct. There are no lime or hardwater deposits or clogs. What could be the issue?


Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... Whirlpool GU2700XTSB / GU2700XTSQ / GU2700XTST Built-in Dishwasher

I have a Maytag model DWU9502AAM dishwasher, took out the top rack (easy) to wash furnance filters, and cannot get the rack back in rightly! Where are the rollers on each side supposed to be placed to hold the rack? Do the snap supports face up or down on the rack? I broke two of the roller snaps and replaced them, still no luck. Does anyone have a schematic??? Maytag has nothing on this I can find. Thanks!


Hi there,\012Well you can try from upside face...... there are some plastic lock type grips... for more information you can download the repair manual, please follow the below link -http://cgi.ebay.com/_W0QQcmdZViewItemQQitemZ ... Bosch SHU9915UC Dishwasher

Kenmore dishwasher type 573-D, model 665.16034402. Items on top rack don't get washed. Items on bottom rack are washed fine. Appears top sprayer and maybe middle sprayer aren't getting water. At rear of washer, top rubber flapper valve (which feeds middle sprayer when top rack is in raised position) is stuck open, bottom flapper valve looks OK. We use top rack in raised position so this doesn't seem to be the problem.


... Kenmore Dishwashers

My Kenmore 13743 is 3 years old and was washing perfectly until a couple of months ago. It has become so bad that it won't clean anything on the top rack and barely anything on the bottom rack. In fact, I just pulled a butter knife out of the rack that still had butter on it! Not normal... I do not know how to remove the bottom washer arm to get at the chopper, filter, etc. Please help


Hello,\015\012\015\012Welcome to FixYa,\015\012\015\012You are likely right on, this is very common with these unfortunately. Hopefully this will help.\015\012\015\012**Unplug the unit or turn off the powe ... Kenmore 13743 Staimless Steel Built-in Dishwasher

We have a built in GE dishwasher. It has worked fine for about 4 years but now the glasses in the top rack will not come clean. I have cleaned all the holes where the water comes out but I think the sprayer that is beneath the top rack (the one that is attached to the bottom of the top rack) is not rotating. We had someone out to take a look at it and they said it was fine. It isn't fine as it is not cleaning the dishes. Is there a reason that the bottom sprayer is not turning?


Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... Maytag Dishwasher

Maytag MDB7100AWW Is not throughly cleaning dishes on both top and bottom racks. Some food particles may be flicked off with a finger after the wash cycle. Some dishes are cleaned and in other locations on the same rack it is not. It is not throughly rinsing and leaves a film. The top and Bottom spray arms and bottom filter have been cleaned


Hello there:I will post this in 2 seperate post's due to the length of this answer and possiable solutions ok?\015\012\015\012 \015\012 If your dishwasher is cleaning poorly, check these:\015\012 ... Dishwashers

My Frigidaire Dishwasher, leaks when "not" fully loaded.


... Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0614 seconds