Having problems with your Maytag MDBH985AWB / MDBH985AWS 24 in. Built-in Dishwasher ?

The top rack on my dishwasher won't stay back like it did when it was new. It keeps slidding out making loading the bottom rack difficult. Can I replace the wheels or something else?


Answers :

Repair Help & Product Troubleshooting for Maytag MDBH985AWB / MDBH985AWS 24 in. Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The top rack on my dishwasher won't stay back like it did when it was new. It keeps slidding out making loading the bottom rack difficult. Can I replace the wheels or something else?


... Maytag MDBH985AWB / MDBH985AWS 24 in. Built-in Dishwasher

My kitchenaid dishwasher has a bottom rack allignment problem. Especially when it is fully loaded the right rear pair of wheels often slips down off the bottom track and makes rolling the loaded rack fully in very difficult. I've already had a serviceman come out and he sent me a new bottom rack and set of four rollers and that improves the situation but does not eliminate it. Any similar complaints? Any easy fix before I call the service guy again?


Hello. If you have a new rack and new wheels the only fix to your problem is to either replace the dishwasher all together or NOT put as many items in the bottom rack. I am always bothered when anyone tells me they were sold a new rack because the ... KitchenAid 24 in. KUDI02IRBS Stainless Steel Built-in Dishwasher

Model # PLD2850RDC2 has a leak at the bottom of the door. i have replaced the gasket in the vent. Had to remove door cover and seal at bottom of door. Had difficulty replacing bottom seal. How do I replace seal correctly? It is still leaking. Could it be something else?


The side baffels are bad. look on each side on the bottom in the corners and that is were their at just pull them out and get new ones ... Dishwashers

Our Whirlpool dishwasher, DU1145XTPBA, has almost quit cleaning the dishes. It started with dishes on the top rack. My husband was told by rep to replace the top unit. That did not help at all. Now the bottom dishes are almost as dirty and gritty as the top rack. This dishwasher is too new to have to be replaced and we've already spent $50 on the top rack. Is there anything else to check at this point?


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

I would like to know how old this dishwasher is? Mod HDA2000Z05WH and serial is SV826876Y. Would the wheels coming off bottom rack cause the motor to burn up causing washer to not work. There is a hard cap over something in the left corner on the bottom . Imwould like to know what is under that cap?


... Hotpoint 24 in. HDA2000Z Built-in Dishwasher

The bottom rack of the dishwasher is always coming off the "track" or what passes for one. The wheels seem too small or the rack isn't wide enough Makes it very diificult to push in or pull out.


Hi\015\012Problems with the dish racks usually occur because the racks have been jammed back into the tub housing after they're fully loaded. Careless handling can exert enough force to crack or break the roller wheels or throw the racks off th ... LG Dishwashers

Bosch dishwasher SHX46A05UC/40 is making noise when draining. I have cleaned the screen and hose back to the drain and removed all debris. So it seem to be the 'drain pump'. But replacing it - now that seem complex - is it? Looks like I would have to stand the DW on its head and remove the base and then replace the pump. Anyone know if I am on the right track? Could it be something else?


... Dishwashers

The unit goes through its cycles but the top rack is not getting clean. The bottom spray wheel works, the middle and top spray arms are getting water but it seems not enough to make them rotate. The pump screens are clear and there seems to be enough water. Whats going on?


The problem is likely to be that the jets in the rotor arm are blocked.\012\012To check this, remove the arm (it is easy to do, as it is intended for the user to do this) and clean out all the holes. Try running water from you tap through ... Dishwashers

My 12 yr old KitchenAid -Sculptura-Model KUDR24SE starts to fills with water and then does nothing else. It will eventually go through the cycles on the panel, but nothing is happening inside. End result is still dirty dishes with water sitting in the bottom that has to be baled out. Cups on top rack don't have any water on the indentations, so it's obvious that the thing filled with water and that's it. I had the motor replaced (supposedly with a new) one 2 years ago so I find it hard to bel


... Dishwashers

DIrty Dishes SO i run a load a dishes through the diswasher and they dont come out clean. The original waste is gone but has been replaced by what looks like blended waste from the garbage diposal. I am wondering how you can declog the hose??? Or is it something else??? Thanks for your help.


Try running it through empty with some cleaner in it check all the in side for anything clogging it and then if you can put some hot water in it to loosen any grese ... Hotpoint HDA2000G Built-in Dishwasher

The dishwasher was recently removed for floor refinishing and reinstalled. The bottom rotor works but the top rotor does not. I asked the re-installer, who worked for the moving company, if he had connected everything properly and he said there was just one water line going into the machine and assured me he had connected it properly. Is there something else that needs to be done to make the top rotor operational? Thanks. John M


... Jenn-Air JDB3610 Built-in Dishwasher

The flimsy plastic guide wheels on the rack for my (ca. 2000) GE monogram dishwasher have been breaking. Six so far. GE wants $25 - $30 per wheel to replace and $235 for a whole new rack!! I will not reward this rapacious corporate behavior. Is there an appliance graveyard (like an auto wreck yard) where one can get a used rack? Are there wheel manufacturers/suppliers that will sell reasonably wheels of similar dimensions to the breaking wheels? Preferably in nylon or stainless steel, not the cr


We have just solved the problem with our wheels falling off! For .75 cents a wheel we purchased new wheel "clips". The connect straight into the wheel instead of "rotating" on. Big differnence and so easy to change out! 5 minutes and the problem is g ... Dishwashers

Maytag Dishwasher Model #MDB7600AWB One of four plastic WHEELs mounted by screws to a 10 inch metal bar located on either side of the top rack has broken where the wheel meets the screw shaft. (These wheels run along the guide tracks for the upper rack mounted on the inside of dishwasher.) Please provide me with a part number so I can order a replacement part. Thank you.


Call Maytag with information of the tag on machine ... Maytag Dishwashers

The same problem as everyone else with the motor continuous running, but it keeps happening about every 5 months. Know I have done the normal procedure it is making a fairly loud noise while running.


... Asko 24 in. D3112 Free-Standing Dishwasher

I have a kitchenaid Model KUDW03CTBL2 dishwasher. It is pumping water, but the top sprayer and the one under the top rack just have a little water coming out. Not enough to make them spin. We also noticed the water in the bottom when opened is not as much and it is cool not hot. The dishes on the top rack will not clean, and the bottom is not completely clean. We have checked water pressure and water tempurature through the house, All is operating fine. This dishwasher is only 1 year and 10month


... KitchenAid Dishwashers

Had my Maytag dishwasher for just over 2 years. Lately is has been making a loud grinding/vibrating noise - like something is stuck. I actually pulled out a piece of a plastic twist tie or something and thought I had solved the problem. Worked like a charm for a couple of days and suddenly the sound is back - and worse! I've read here that you should remove the bottom piece and make sure nothing is stuck before calling service. I'm the woman that's going to do this and could use some guidance ..


... Maytag 24 in. MDB4651A Built-in Dishwasher

I have a Bosch SHU9955UC/14 dishwasher. I am having problems with the top rack not cleaning. The dishes on the bottom rack are cleaning just fine. I have taken the rotating spray arm off and cleaned it out and replaced it. I have also taken all of the filters out of the bottom of the unit and cleaned them. Any other suggestions for fixing this problem?


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Bosch SHU9955UC Built-in Dishwasher

I have a Maytag Quiet Series 300 Model # MDB8601AWS and serial # 10142983NA. I need to replace the bottom rack as many of the prongs have broken off and I need a bigger utensil holder. I know it has a safty recall and a local repairman is coming on Saturday. Where do I buy the replacement racks and holder?


... Maytag 24 in. PDC3600A Built-in Dishwasher

I have a three-year-old Sears Kenmore Elite dishwasher. I find that despite the fact that we scrape and rinse our dishes before loading the machine, after each three months of use (two loads a day) or so, I have to take the machine apart (spray tower, racks, bottom impeller, bottom screen housing, food grinder cover) and clean-out the food grinder area, for it fills-up with sludge. The sludge restricts the water flow and there isn't enough flow to turn the impellers via that steering jets.


Have you tried different detergents? Some detergents after getting wet and going through the wash cycle with the debris from the wash turns into a grease substance that grimes up in some dishwashers. Try running the machine with hot water this someti ... Dishwashers

The top rack isn't getting clean. Is it needing something cleaned out, or is something not sealing and taking the water pressure up to the top rack? How do I trouble shoot this. I already tried running an empty load with white vinegar...


Good evening. The white vinegar was a good start. It may not have helped the problem described, but will help clean out the lower end of the unit. Look for plugged nozzles and slots on the arms. Remove the arms and wash backwards through th ... Maytag 24 in. MDB6601AWS Stainless Steel Dishwasher

Code F2 I just replaced the door switch on an inoperable DD-602. My top drawer was working fine, but my bottom one has been offline for a while (door switch failed and I never got around to fixing it since I had the top). Well, my top finally failed too so I replaced both switches. Looks like everything is good on the top, but my bottom is erroring with an F2 code now. Kindof makes a thumping noise as it starts the cycle -- maybe 3-5 short thumps and then a 10 second delay, repeats. Any ideas? C


F2= \015\012The motor has not\015\012been sensed rotating\015\012\003 Foreign object has jammed the rotor\015\012\003 The rotor has failed\015\012\003 The hall sensor has failed\015\012\003 The electronic controller has ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Only bottom rack cleans. Re-plumb or replace?


Do you have a garbage disposal? If I run mine while the dishwasher is running, dishes do NOT get clean! ... GE 24 in. Profile PDW7800 Built-in Dishwasher

I have a kleenmaid dishwasher DW35X. The racks are breaking so it can't hold the dishes. I have an estimate of nearly $400 dollars to replace the racks. Not the bottom basket simpley the racks. I was wondering what model Brant that would be and I may be able to get it in from overseas much cheaper.


I usually keep an I out for racks by looking for dishwashers that have been discarded or are being sold cheap but still have good racks, you will have to make sure they fit though some do some don't.\015\012you can also call around to used appliance ... Dishwasher Accessories

I have a GE dishwasher and it seems as if the top rack is getting clean and part of the bottom but the back left and front right of the bottom is not cleaning. Something must not be moving for the bottom? Please help! I just got this and was so happy to have a dishwasher and now it is useless :(


Hi, \012 \012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms onli ... Tappan 18 in. MDR251RE Built-in Dishwasher

I have a ge dishwasher and it seems as if the top rack is getting clean and part of the bottom but the back left and front right of the bottom is not cleaning. Something must not be moving for the bottom? Please help! I just got this and was so happy to have a dishwasher and now it is useless :(


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Tappan 18 in. MDR251RE Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1388 seconds