Having problems with your Meiko Dishwashers ?

HI, We have a Meiko DV 80.2, with a recurring error code of 204. I changed the booster level switch, and it worked for a while, but is now showing the same error 204. Any ideas Please ?

\015 Hi, We have a Meiko DV80.2 commercial dishwasher. It has a recurring error code of 204. I changed the booster level switch and it worked for a while, but is now showing the same error 204.\015

Answers :

Repair Help & Product Troubleshooting for Meiko Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

HI, We have a Meiko DV 80.2, with a recurring error code of 204. I changed the booster level switch, and it worked for a while, but is now showing the same error 204. Any ideas Please ?


... Meiko Dishwashers

Bosch dishwasher SGS45EO2GB/45 does not complete washing cycle. It stays at 1 min left with pump running. I have reset the machine twice at which stage the pump empties the machine and the display shows 0 mins. However, have tried it agin and same problem. Any ideas, please?


... Dishwashers

Showing Error 2 but on model DMS500 any idea please?


... Samsung DMT800RHS Dishwasher

Hi There, I have a F&P 918td dishwasher which has stopped working. Whenever I press any of the buttons I get 5 very quick beeps and then nothing - no error message, nothing the display is blank. If I turn it off at the wall and then back on again the display briefly shows two characters that do not show up in the manual as valid errors. Any ideas anyone?


Sounds like a fried board. ... Dishwashers

Belling IDW604 Hi, I have an error code E4 showing on this machine any ideas on how to fix it?? it seems the pump is wanting to start but then does not I cant see a block in the tubes and I want clean dishes!! Any ideas would be gratefully recieved Rebecca


I found the solution myself. On the bottom plate, there is a float and a microswitch, when the water leaks onto the bottom plate it raises the float and activates the microswith which shuts down the machine and shows E4 on display. To get rid of the ... Belling 24 in. IDW603 Built-in Dishwasher

Error E1 Just moved to a house where a Fisher & Paykel EZKleen Stainless Steel DD605SS - 2 drawer is installed. Tried to get it going and both drawers show a plate icon and 38 and 45 mins respectively, then there are some sounds and we get Error E1 on both of them. There was no manual and the video they left didn't help. Any ideas? I would also be interested in a link to a User's guid. Thank you, Julia.


There is no e 1 error in dd603 , maybe u1 or f1 , u can call 1800650590 nd ask hem to send the use nd care manual , or download it from fnd p website ,\015\012If it is U1 its saying taps not turned on , more than likey u have a F1 fault which i ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

My dishwasher a favorit 65070 is showing an error code of i30. This shows the anti flood system has triggered. How do I fix this please!


... AEG Dishwashers

Our 2 drawer Fisher and Paykel dishwasher is automatically starting its own washing cycle (well, motor starts, but no water appears to be entering), then it shows F1 error message and a spanner icon flashes. Within 30 secs of this occurring on one drawer, this starts on the other drawer. Only way to stop is to switch off at power socket. Any idea what the error message is telling me?


... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

I have a similar problem to another person. The drain on the dish drawer was blocked. The unit now shows an F1 error code ( flood?) and the pump runs continuously even after I've unblocked everything. I've tried switching it off for ages and drying everything out. When I switch it on again it shows the wash programme but then reverts to F1 and the pump motor runs continuously. Any ideas to cancel the F1 code?


The flood sensor on this unit is a PC board in the base, so you would need to remove the lower drawer and dry it out under there. If the base is dry and you still have the error, you can take a look at that sensor and clean any corrosion/minerals off ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Error Code dishwasher is 14 years old, model number 47918 - error code has appeared in the LED panel inside the door but only shows the letter F, any ideas what the problem may be?


... Creda Dishwashers

LE error my new ( 2.5 years old )dishwasher just broke it is LG model LDF 7810ST I got the LE error dont know what this mean and what can be worong with it ....it starts for few minuts and stop any idea please help


The first thing to check with an LE error on an LG LDFxxxx dishwasher is the drain hose. Start at the point where the drain hose connects to the drain pipe or garbage disposal. Make certain that the hose rises as high as it can. That will form a h ... LG 24 in. LDF7810 Built-in Dishwasher

I have an Asco D3350 dishwasher. When the cycle starts the machine fills with water and when there appears to be the right amount of water in the machine an error code F4 shows on the panel. 3 clicks can be heard during the first 5 seconds of the F4 code showing. If I cancel the cycle and start it again it pumps out the water and then fills again and the code returns. Any ideas?


... Asko 24 in. D3350 Dishwasher

I have kelvinator washing machine, E11 shows when on the screen when I start it. ask me to restart the washing machine but when I restarted it disaply error. Any help please


... Kelvinator MDB121RF Dishwasher

I have a Kenwood Dishwasher KDW12ST3A. P1 cycle stops after about 40 minutes and shows on the screen an error code of 'E3', Not sure what this means as I have mislaid manual. Can you help please?


... Kenmore 15762 Dishwasher

I have a Candy dishwasher. Door is open switch on sounds like something (possibly pump) is running and error E4 shown on diaplay. Any ideas please?


Overflow tray (bottom dishwasher). Tilt your dishwasher, pour water and see the reason for the overflow. I blew off the top hose from the pump. ... Candy 17 in. CS455 Built-in Dishwasher

Machine is Hotpoint BF72 Int D/washer: Press Power button and machine shows P0 and beeps twice - press P button and nothing happens - press Timer (clock) button and digits 21 appear - press again and reverts to P0 etc... - all other buttons are dead. No error code and NO info in handbook as to how to set (or guessing at "unset" in this case!) timer - help please


3 instances of this problem and no fix? ... Hotpoint 24 in. BF72 Built-in Dishwasher

Display shows error E24 . What does this mean please?


E24 means the water supply isn't getting in ... Bosch SHE5AM02UC Stainless Steel 24 in. Built-in Dishwasher

Hi, My Mieko FV 40.2 Glass washer is showing fault 722, any ideas please as Ive not seen this one before.


... Meiko FV 40.2 Dishwasher

Zanussi LS6 undercounter dishwasher showing a C3 error. Any ideas?


... Zanussi 24 in. LS6E Free-standing Dishwasher

I have a kenwood kdw12st3a dishwasher (just out of warranty grrr). When turning on I am unable to select a programme. It beeps and shows "---" but nothing happens when selecting the program button. I have checked the door catch, seems fine. Any ideas please?


... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

My Prima LPR 600 shows the fault code of four flashes followed by a pause. Any ideas please?


... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

My Bosch integrated dishwasher(model SGV56A03 GB/12) runs through the cycle but doesn't stop at the end of the cycle. It continues to heat water and it sounds like the motor is running even though the time indicator shows 0 minutes. I have to manually switch it off. Any ideas before I call out an engineer. I have checked all the filters etc included in the troubleshooter info anf there are no blockages.


... Bosch Dishwashers

Hi, my AEG 40850 Dishwasher has an error code .10 after about 2 -3 minutes into the cycle. Any ideas or suggestions please?


... AEG 24 in. Favorit 40850 Free-standing Dishwasher

I have a fridgidaire dishwasher, model PLD3460. Getting no water, cycle selector is stuck on on china setting. It did show an error code of EE. Any ideas?


... Frigidaire 24 in. PLD3460 Built-in Dishwasher

Have a 2+year old LG LDF6810ST dishwasher that shows no error codes but is not cleaning like it used to. Have city water, do not leave excess food on dishes when loading, am only using powder after reading other tips about the use of gels. There is excess moisture in the tub and on dishes after the cycle. Does not appear to be drying as it previously did. Any ideas?


Try these things in order:-Try to use a name brand powder, rather then a generic. Even a small box. I had similar problems with my LG dishwasher when I tried to save money by buying a generic powder. My dishes did not get clean and whi ... LG LDF6810ST Stainless Steel Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0587 seconds