Having problems with your Samsung DMT400RHS Builtin Dishwasher ?

Samsung dishwasher low water code

\015 Dishwasher has been siting unused for a couple months ( waiting for a back ordered drain hose) now the low level water error code is on there is some dirt build up in the side reservoir where the water goes in, would this be causing my problem if so can it be cleaned how? replaced? or should i be looking at something else\015

Answers :

Repair Help & Product Troubleshooting for Samsung DMT400RHS Builtin Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Samsung dishwasher and a code comes up that says that there is a low-level water function problem. The solution in the manual says to run it empty to clean it. I suspect that the water level chamber may have food deposits in it causing the low-level sensor to misfunction. Where is the water level chamber and how do I clean it?


... Samsung Dishwashers

Samsung dishwasher low water code


... Samsung DMT400RHS Builtin Dishwasher

I have a 11 month old Samsung DMR57 dishwasher that is displaying an E9 Error code (low water level). However there is water in the machine. Does this machince use a thermistor or pressure switch to sense the water level? Where can I get a wiring diagram for this machine?


... Samsung Dishwashers

My Samsung DMR57 Dishwasher gives me error code 9e, telling me its a low water level error. Anyone know what this is and how to fix it ?


Our unit started displaying code 9E after filling, draining and filling again. At the beginning it was enough just to restart it. Finally this trick didn't work anymore. Before calling service for out of warranty I decided to take the unit out of the ... Samsung DMR77LHS Tall Tub Dishwasher

Samsung dishwasher low water level - Samsung DMT400RHW Builtin Dishwasher


... Samsung DMT400RHW Builtin Dishwasher

My Samsung dmt300 had an leak on the outside hose with water coming out every where. I shut off water and fixed the leak. When I turned on the dishwasher a blinking heavy lite button came on. This error code means leakage How do I reset the sensor. The dishwasher worked fine before the outside leak .Please help, I don't want to call a repair person!


... Dishwashers

Samsung dmt800 dishwasher error code 4e. Water valve is open, pressure and temp correct, flex water hose not kinked, water inlet valve is free of debris. next steps? replace water inlet valve?


... Samsung DMT800RHW Built In Dishwashers

Error Code E1 means longer inlet time. possible causes faucet is not opened, or water intake is restricted, or water pressure is too low, according to the BRADA portable dishwasher model EP9242AWW What does that mean and how do I fix it? I have shut the water faucet off and the error message still shows.


... Dishwashers

Samsung 9E Error - Low Water Level. Dishwasher has worked fine (10 months old). Confirmed adequate water supply/availability. When opening the dish washer after error, the inside has no standing water. I can hear the dish washer initially fill. This happens later in the cycle (maybe 10 mins in) Should I replace the fill switch/sensor. Is there any info available on how to fix it my self. Appreciate your help!


... Dishwashers

Samsung DMT300RFS dishwasher; low-level water error


A Samsung service tech showed me how to fix this one. You can take that float and the white box apart from the dishwasher and once opened, if its like mine, there will be gunk on the float and in the box at the line where it fills with water. This gu ... Samsung DMT300RFS Builtin Dishwasher

Serial #88445-B Rym 717881 model # fpdd 603 We are getting a fill fault code when we start the dishwasher. When the alarm goes off we have to pause the wash cycle open the door and then close the door if we do this about 2 or 3 times it will wash. It seems it fill with water but it seems to be low on water Dave Heller


... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Zanussi DA6141. Dishwasher will not progress from turning on at wash code c1. Test 1: No kinked hoses Test 2: Put water in by hand and it empties it. Lift out the central sieve/filter and it all appears very clean. Test 3:Inlet water filter clean. No actions except low buzz (?solenoid?) after emptying. (Possible Hint: Previously this washer sometimes stalled with knob rotated 15 degrees clockwise from C1 position and would continue to wash dishes indefinitely, if unattended. This was


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. If the\015\012cycle doesn't complete, check these:\015\012\ ... Zanussi Dishwashers

Our dishwasher won't start (model number 665.16049401). We had a similar problem last summer and a repairman came and fixed it. The problem was that the water level had gotten too low and so the machine locked itself off. This made sense as, at the time, I remembered filling the pool, running laundry and someone taking a shower all at the same time that I turned the dishwasher on. I am guessing this is the same thing that has happened now. The repairman put in a code and the machine worked. Can


Hello,\015\012\015\012ahhhh, you're taking about the reset sequence.\015\012okey dokie :)\015\012\015\012Here it is:\015\012Push the NORMAL WASH then HEATED DRY buttons in that sequence two to three t ... Kenmore Dishwashers

Samsung dmt400 low water level error message - Samsung DMT400RHS Builtin Dishwasher


... Samsung DMT400RHS Builtin Dishwasher

Samsung dishwasher low level water - rubber check valve ?


... Samsung DMT400RHS Builtin Dishwasher

Low-level water error Samsung DMT400 dishwasher


... Samsung DMT400RHS Builtin Dishwasher

I start the dishwasher & after about 2 minutes 9E code comes up which manual says it means low water level error - we shut off circuit breaker & then turned back on & didn't help - HELP PLEASE


... Samsung DMR78AHS Builtin Dishwasher

Samsung dmt800rhs dishwasher 9e code water level


... Samsung DMT800RHS Dishwasher

Samsung dishwasher will not cycle, keep getting low water level warning


... Samsung DMT300RFS Builtin Dishwasher

Samsung dishwasher Error code 9E, fill water after that drain out, and the same action without stop.


... Samsung Dishwasher - Model Dmr57lfs

My samsung dmr77 dishwasher has a SE (or 5E) code, won't run, there's water in the bottom. How do I get it apart to see if pump has something stuck in it?


... Samsung DMR77LHS Tall Tub Dishwasher

Samsung dishwasher dmr57lfs, is saying 9E, low water level. how do i fix this or reset it


... Samsung DMR57LFS Stainless Steel Builtin Dishwasher

Low water reading on SAMSUNG DTM800 Dishwasher


... Samsung DMT800RHS Dishwasher

My dishwasher displays 9e on the front panel. Its error code for low water level. I already reset the breaker, and that did not do it. what else could I do to fix it before calling someone for repair? I am handy with fixing things.


There is nothing wrong with the solutions detailed above however, there are no permanent fixes to the 9E error code and the sticking float/micro-switch actuator. I removed the "float box" by first removing the tub filler, or whatever the splash/bubb ... Samsung Dishwashers

How do i fix low-level water error on a samsung dishwasher


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1595 seconds