Having problems with your Whirlpool 24 in. DU1055XTPS Stainless Steel Built-in Dishwasher ?

I just purchased a whirlpool dishwasher DU1055xtvs. ran for three hours for the first time. Is his normal running time?


Answers :

No check warranty
Repair Help & Product Troubleshooting for Whirlpool 24 in. DU1055XTPS Stainless Steel Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I just purchased a whirlpool dishwasher DU1055xtvs. ran for three hours for the first time. Is his normal running time?


No check warranty ... Whirlpool 24 in. DU1055XTPS Stainless Steel Built-in Dishwasher

Crosley CDC610B Freestanding dishwasher The dial hums when I try to start the dishwasher. If I open the door and bang on the inside of where the timer is a few times, then slam it shut, the dishwasher kicks in and runs the cycle normally. This has been happening the last three times I've run the machine. Any ideas? Thanks!


... Crosley CDC610 Free-standing Dishwasher

I just recently purchased a new fridgidare dishwasher and have tried it four times. the first three times i tried using a tablet and it didn't dissolve at all. this last time i used liquid and it all was piled up by the drain in the front left corner...is there something that i'm doing wrong? or is it a problem with the dishwasher...


Your water is not entering the dishwasher. Could be a kink in your water supply hose or the water supply is not fully on. Perhaps during installation the wires came loose from the water valve underneath.Check these things and report back. ... Frigidaire Dishwashers

I have a Frigidaire dishwasher, Model FDB15000LFCO. Serial No. TH74135326 purchased 10-19-07 from Lowes. The washer stopped working almost immediately. On December 5, 2007 the computer brain for the washer was replaced by Able Appliance Service, LLC, Swannanoa, NC (828) 296-1017. Four months ago my electric bill for three months was almost twice my average use for the time period. We stopped using the dishwasher for one month, and the bill returned to normal. Was one part in the dishwasher in


I think you have one 0 too many in the model no. should have been FDB1500LFCO. The user manual is available here.\015\012 ... Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher

My KitchenAid dishwasher model # kudp01ilbl2 won't start. It is the first time we're trying to start it since we had our water heater replaced (three, maybe four days ago). Not sure how much that may matter. I tried turning off electricity to the dishwasher at the fusebox (overnight), but that did nothing. Normally, you just need to hit the start button and the washing begins. Now, nothing happens. The dishwasher is about six years old.


... KitchenAid Dishwashers

Dishwasher We are having a problem with our Whirlpool ADP5540 dishwasher. We have just moved into a new house with this model dishwasher and have tried running it on a number of cycles. It always seems to stop part way through and the start button then flashes three times. Any ideas what the problem is or how to fix it?


If\015\012this is a blinking "clean light", this is a common problem with some\015\012of the Kenmore\015\012and Whirlpool models. I believe the problem is attributed to water supply\015\012temperatures being too low when filling. Apparently, th ... Dishwashers

There is a slime that builds up on the bottom of the dishwasher. I have owned dishwashers for over 30 years and this is the first time I have ever experienced this. I have run a cycle with just vinegar but it does not help. This is the worst dishwasher I have ever owned, I should have remained with Whirlpool, it is a much better product.


... LG 24 in. LDF 7811 Stainless Steel Built-in Dishwasher

I have the Whirlpool DU 1100 dishwasher and the clean light kept blinking. I did the heated dry, normal combination and got it to run through the diagnostic check and sure enough it cleared the lights and appeared ready to run. When I would start it up again it would run the water and then get to the soad wash cycle and stop. No more lights it just stopped. I have been through the diagnostic process 3 times and still same problem. HELP


... Whirlpool Dishwashers

KitchenAid KUDP01DLBS2 dishwasher. Runs for a very long time on any cycle; time does not seem to advance. (takes 2.5 hours or more for normal cycle. "sensing soak", "water heating" lights on for a long time, even though it appears that water is not being heated. Checked incoming water temp, is hot. Did not do this when new, something has changed. Typical cycle was 1 hr 10 min. before.


Sounds like the heater inside the dishwasher is not working. The machine is trying to get the water up to a preset temperature, probably in the neighborhood of 140 degrees. That is one of the things that it is sensing.After the machine fi ... Dishwashers

RUN TIME ON NORMAL WASH IS ABOUT 3 HOURS


Common failures on that usually are the heating element. Look at the botton and see if it is broken anywhere. ... Whirlpool GU2400XTP Built-in Dishwasher

Hi, I have a Kitchenaid KUDI01TJWH0 dishwasher that failed. Any of the front control buttons like Heavy-Normal-RinseOnly or even the HiTemp-EnergySaver .... when you press any of these, the corresponding light for it will blink three times and go off. Normal operation that light for that button will come on and stay on. but none of the lights stay on. If you press start, the 'water heating' light will come on and you will hear the pump run for about 10-15 senconds, and then everything goes off


Hi Your Problem is Probably The Control Panel. Not The Electronic Control. The Plastic Piece Across the Top of the D/W, Which Tells the Control What to do But You Must Realize These Parts Can Be Very Expensive. John H. Been in this Business 35 Yrs ... KitchenAid Dishwashers

I have a Kenmore Quietguard Standard model 587 Dishwasher. It's about 3 years old. Lately, it has been running fine through the first hour and then towards the end, it will pause and the "Hi Temp" and "Heat Dry" like will start blinking at the same time. It's like it is stalled. When this happens, I open up the door and look at the bottom of the dishwasher were the screen is, and I see there is standing water. I press the "Start/Cancel" button to help it drain all the way, which it does, but th


Hi,My take on that would be a bad heating element....the dishwasher is looking for the heat from it and that never happens....so it goes no further and gives the alarm....I would get someone to check that heating element out and replace i ... Kenmore Dishwashers

I have a Dewalt 3800 pressure washer fitted with a 67DX39G11 pump. Started unit up for the first this year, has pressure for 15 seconds then nothing. Water is flowing through okay, everything seems in order but no pressure. Unit is 2 years old but has only 15 hours of total running time. I think the pump has failed, is it normal for a pump to fail with only 15 hours on the clock?


... Dewalt 3800 PSI Pressure Washer

About thirty minutes into the dishwasher running it starts to make a heavy woo, woo, woo sound, almost like a grind. It is only for about two sections of the time and then it stops and sounds normal again. It has been happening for the last week. The dishwasher is three years old.


The sounds it is making most possibly are coming from the drain cycle. It is probably finished with the prewash, or the first cycle (depending on what cycle you use). You may have some foreign object down inside the impeller which is why you hear i ... Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher

LG DISHWASHER, MODEL LDF6810WW, SER #706KWTA00393 ON STARTUP PUMP RUNS 10 TO15 MIN. BEFORE IT PROGRESSES TO NEXT STEP.THERE IS A LOUD HUM DURING THAT TIME. ALSO THE NORMAL WASH CYCLE TAKES ABOUT 3.5 HOURS. THE REPAIIRMAN HAS BEEN HERE 3 TIMES WITH NO RESULTS.


... LG LDF6810ST Stainless Steel Built-in Dishwasher

We have just purchased and installed our dishwasher. Towards the end of the cycles it has a very high pitch noise when the heated drying cycle. Is this normal, or is there something wrong? It is VERY annoying - it reminds us of a 'ringing in the ears' noise. Also - is there a listing of time for each cycle? It seems that it runs a LONG time in each cycle that I have tried - with or without any specific instruction, i.e. heated dry. Thank you.


Hello. This dishwasher is definitely not functioning properly. Call the store where you purchased it and report the problem. Because it is under warranty you have rights. You should return it [this would be my choice] or have the store sen ... Dishwashers

Model: Whirlpool ADP 4501/5 (4 years old) Problem: Dishwasher won't start wash cycle. Green light flashes 11 times. After adding a bucket of water to the dishwasher it runs normally. Checked the inlet valve and it appears to be fine. Filled the salt container and it solved the problem for a while but having the same problem again. Any suggestions would be appreciated.


... Dishwashers

This dishwasher is older than most living people in this business. It works great except it is a 208 three phase unit. It is in St.Peter's church in New York Mills, MN. We bought it used during our remodel project in 1994 for a price of $800.00. That was our mistake. We had a converter installed to accomadate the 3 phase power supply. So we have this converter running 24 hours a day using up electricity and we use the dishwasher four times per year. I am wondering if we could replace the motor o


This unit is a dinosaur. The 3-phase converter had to cost twice as much as the unit. Best solution - turn the power off to the 3 phase converter when not in use.Better best solution - find a newer unit that will be repairable should it n ... Hobart AM14-253 Free-standing Dishwasher

I purchased a Whirlpool dishwasher in either July or August 2009 from Best Buy. It is not cleaning all my dishes. I have tried 3 different types of soap--the packets that came with it; powder; and liquid hoping that it would work. I have loaded light and heavy. I have tried the normal and light settings with rinse, hot water or not. They are just not getting clean. And the dispensers are not totally emptying. I already had to have a new dishwasher sent because the first one was damaged on


I fixed this problem by calling Whirlpool directly which I should have done to begin with. I wasted $20 on your person. I waited and waited while the screen said everyone was busy. And then I was cut off. When I went back to the website, your per ... Whirlpool Dishwashers

Bosch built in dishwasher shu4302uc The dishwasher appears to run through the cycle but the cycle takes over three hours. When the cycle finally finishes the dishes are not completely dry. Is there a way to adjust the timing for the cycles? I have checked the screens and they were clear.


\015\012There are no adjustments for cycle timing. What does affect timing is temperature of the water coming into the DW. The hotter your supply water, the shorter the time to cycle, BUT if your water is too hot, the cycle time may become too ... Bosch 24 in. SHU43 Built-in Dishwasher

AS PER DIRECTIONS FROM TECH, I PURCHASED AND INSTALLED A NEW CONTROL UNIT. THIS WAS BECAUSE MY WHIRLPOOL DISHWASHER GOLD GU2300XTLB3 QUIT WORKING IN ALL CYCLES EXCEPT SHORT CYCLE. PUT EVERYTHING BACK TOGETHER AND TRIED TO GET THE DIFFERENT CYCLES TO WORK. NOTHING WORKED EXCEPT THE CLEAN LITE FLASHED A CODE 7.(FLASHED 7 TIMES THEN QUIT. THEN IT WOULD FLASHED 7 MORE TIMES THEN QUIT) iT HS BEEN DOING THIS FOR WELL OVER 24 HOURS. WHAT MUST I DO TO GET BY THIS ERROR CODE AND GET IT TO START W


Hi,This is a common problem with Whirlpool washers.If\015\012the clean light is the one flashing then your dishwasher could have a\015\012heater circuit problem (depending on the age) or this could simply just\015\012be water colder ... Dishwashers

I just installed a new Whirlpool dishwasher (model DU1301XTV) and have run three loads. Each time, the glasses, silverware, and plastic, come out with white, chalky residue. There are also water spots. I have tried it with both Cascade detergent, and with a Quantum Finish tablet. I have also filled the reservoir with Jet Dry. Do I have a defective dishwasher? Do I have a clogged line?


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. First of all please check the water\015\012temperature by using a thermometer inside the dishwasher to measure ... Dishwashers

We have a Bosch Diswasher Model SHX-46A05UC that we purchased three years ago. We have loved it! This week it started running a long long time and won't finish on its own. Also the santitized cycle is not working. We live in a remote mountain town and our local appliance repair man refuses to work on it because it is a Bosche and he hates them. Please help! Can we do something on our own before having to pull the dishwasher and take it out of town for repair? Thank you...Jackie


... Bosch Dishwashers

I have a Whirlpool dishwasher GU1500XTL53 that has a sensing problem. When I start in "normal" or "antibacterial" the sensing light turns on and the unit constantly runs without a number showing up on the time left. Is there any fix to this? Thank you


... Whirlpool 24 in. GU1500XTLS Stainless Steel Built-in Dishwasher

Whirlpool gold, quiet partner III, My dishwasher is not cleaning very well and when it is done it flashes clean. The clean flashing light wont stop. It flashes 7 times and stops for 3 sec then starts again. I know how to reset washer using heated dry and normal buttons but when i run it again when it is finished it goes back to the clean button flashing


... Whirlpool Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2113 seconds