Having problems with your Whirlpool GU2400XTP Built-in Dishwasher ?

My GU2475XTVY0 built-in dishwasher has the "Normal" light flushing since yesterday morning. We pressed "Cancel" button, other buttons, and finally turned the power off and on, but it didn't do anything. Do we need to call for a service? It's less than 1 year old. Thank you!


Answers :

Whrilpool Gu3600XTSB1
\015\012\015\012After a power surge the control panel pot scrubber and\015\012normal lights were flashing. I replaced the circuit board, thermal fuse and\015\012control panel. However, the lights are still flashing. what is the sequence of\015\012buttons do I push to reset the system.
Hello- The touch control pad is failing and must be replaced. If unit is under warranty, get it serviced. This control is about 125$. Let me know if this info helps. Thanks-Ed
Repair Help & Product Troubleshooting for Whirlpool GU2400XTP Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My GU2475XTVY0 built-in dishwasher has the "Normal" light flushing since yesterday morning. We pressed "Cancel" button, other buttons, and finally turned the power off and on, but it didn't do anything. Do we need to call for a service? It's less than 1 year old. Thank you!


Whrilpool Gu3600XTSB1 \015\012\015\012After a power surge the control panel pot scrubber and\015\012normal lights were flashing. I replaced the circuit board, thermal fuse and\015\012control panel. However, the lights are still flashing. what i ... Whirlpool GU2400XTP Built-in Dishwasher

Hi I have a bosch diswahser smu 7000. No power when I push button. Manual says its could either be fuse or circuit breaker. Checked breaker its ok. My manual does not say anything about location fuse. Called bosch. And they said they cant tell me. I nee to have a service call. Any help. Thanks.


... Dishwashers

Bosch dishwasher (SXH55MO6UC/46): The power comes on and runs normal, but no water is coming into the unit. I was told that it was a water inlet valve that needs to be replaced (part #263833). I need to know if this is what needs to be replaced and if so, is this something that I can do or do I need an expert repair service to do it? If it is something that I can do, I need instructions. I am handy, but this is something that I have not done before, Thank you, Craig Covey


Hi Craig,Yes it may be the fill valve...but first take off the pipe or hose and check the screen just inside the fill valve...some do not have it but most do...also check that water comes out of the hose or pipe at the valve....THEN ... Bosch Integra® 500 SHX55M05UC Built-in Dishwasher

No Power Hi Timon90, I used the dishwasher like normal yesterday today I went to use it and there is no power at all. I have checked our electricity box and none of the switches are tripped. I have put the door in as hard as I can and have checked whether the electricity plug has been pulled out by accident. Can you suggest anything or should I call a serviceman. Thanks from Julie


Remove the door skin dont forget the two screws under the door in the middle,the control panel will lift off remove the power board(unclicks)remove the plastic case and see if its blown.But first also remove the lower kick plate at the front and chec ... Asko 24 in. D3350 Dishwasher

Our two drawer dishwasher model 603dd was working - it showed the "flood button" and then the power cut out and now there is no power to it. Its two years old. Id it worth fixing?? id there anything we can do to fix it or do we need the Fand P repairer out? Thanks


I have a the F&P double drawer d/w. When I use only the top drawer, the bottom one fills with (dirty) water; and when I use only the bottom drawer, dirty water fills in the top drawer. When I use both at same time, there's no problem. Any sugg ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Model mdb8959saso. Recent power failure caused cancel/drain light to blink rapidly. Only way to get it to run is by putting it in diagnostic mode and waiting for codes to stop.Do I need to call for service every time power is interupted?


... Maytag Dishwashers

3 PROBLEMS 1. SPRAYER ARM LIGHT ON BUT WHEN I OPEN THE DISHWASHER THERE IS NOTHING BLOCKING THE ARM FROM SPINNING. 2. SALT LIGHT IS ALWAYS ON. HOW DO I ADD SALT. 3. I NEED NEW TRIM FOR THE OUTSIDE OF THE WASHER. WHERE CAN I GET THAT. OH ONE MORE 4. IS THERE A WAY TO HAVE THE WASHER SERVICED SO I KNOW IT'S IN GOOD WORKING ORDER. LIKE A CAR TUNE UP? WHO DO I CALL? THANKS!


This is just to let you know that the internal water softener needs water-softener salt. If you do not use the softener (I do not at my house) then the light serves as a convenient on/off light.The other issues you have can ... Miele 24 in. Incognito G843SCVi Built-In Dishwasher

Smeg df612sdx Until last week I enjoyed several years faultless service from my SMEG Stainless Steel dishwasher, with the exception of needing to replace 2 x spray arms. The unit has now stopped working altogether. Despite powering up several times, I continue to get both the start/pause and selection programs buttons constantly flash (green lights) when the unit is switched on; previously this only occurred once the wash cycle was complete. Any thoughts would be most appreciated. Thank you


... Dishwashers

I have a whirlpool du1055xtsq3 dishwasher that is not working. Start button does not light and can not run wash cycle, but other buttons do light up when pressed. Can I fix this myself or do I need to put in for a service call? Thanks!


... Whirlpool Dishwashers

Hi There, I have a frigidaire FDB1502RGCO dishwasher and I have power and water going to the macine however when I turn it on it will not start its cycle. Washing light is lit and all functions are lit up as normal on the front panel however the cycle does not start. Is there a simple fix or reset for this machine or will I need to call technical support to have a technician come to look at it? Please let me know. Thank you


... Frigidaire FDB1502RGC Built-in Dishwasher

Maytag Quiet Series 300 Dishwasher - MDB96000AWQ - Panel flashes '9' from time to time. Sometimes you're unable to start it. Did ewset the unit (powered off for 15 minutes and also for 1 week). What needs to be fixed / replaced if anything. Thank you in advance.


... Maytag MDB9600A Jetclean II Built-in Dishwasher

My LG dishwasher is flashing LE. What does that mean? Is there anything I can do or do I need to call a technician? Thank you for any help you can give me. Colleen


... LG LDF8812 Stainless Steel Built-in Dishwasher

Doesn't appear that the washer is running through its cycle. The soap packet isn't desolving and no water is on the plates. There was an incident when the washer tripped the circuit breaker, reset breaker and now it doesn't work. Is there anything I can do, or do I need to call service?


I think something went wrong with your motor or the inlet Solenoid valve. That was the reason for the trip.Take service center help!Hope you are getting power after resetting the trip. ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

My gas power washer will not start. I filled the gas, checked the oil, set the choke, made sure it was on, changed the spark plug, checked the air filter, and drained any water. When I pull the cord to start I don't even get a putter. Anything else I can try or do I need to take it to a service place.


Will it run if you pour a small amount of gas in the carb? If so, it's a fuel supply problem. Most likely a stuck closed float needle. ... Honda Maxus Pressure Washer MX5222

My dishwasher will not turn on and the Start/Resume light will not stop blinking. Is there any thing you can suggest to fix this without my calling and paying for a service call? We have stopped, restarted and reset the unit as well as cleaned out the soap tray. We have also switched off the electric to the washer as well to no avail. Really cannot afford another service call again so please help us out. Thanks. Chris


Reset the control again. Then change out your heating element.\012\012That should fix it good.\012\012Have a great day! ... KitchenAid 24 in. KUDP02CR Built-in Dishwasher

I bought a Frigidaire Dishwasher on November 2006. Model #PLD4375RFCO. (I paid K&N Sales $549.00) In October 2008 I called your toll free Number to report Er code was flashing. You recommended Best Service. I called them and the repairman said the"vent was not closing - fault on Drying fan - vent is closed. Sensor bad on assembly." I needed a new drying fan assembly (for $148). With his service fee and labor after he returned to put in the new assembly, the total paid to Best service was $318.25


... Dishwashers

MDB6709AWW1 Poor Quality Control Panel Our dish washer is 2 years old this month and the control panel broke!!! My service technician told me that he has seen DOZENS of new Maytag dishwasher control service panels break and is convinced it is a design flaw. When I called Maytag the customer service rep had the NERVE to tell me "that because the house is near the beach, I must get a lot of power outages and power surges, that is why the control panel broke." I told her I wasn't born yesterday


... Maytag Dishwashers

Dead dishwasher? I have an Prima LXP600 dishwasher that doesn't work - no power light, no beeps, no anything. I've changed the fuse and used different power sockets. Is there anything that I can investigate, or alternatively is it likely to worth calling an engineer? The machine looks almost unused (was in a repossessed house that I bought, so no history), so I'd like to think that it's got some life left in it!


Please find some help from the link below;\012\012\012http://www.repairclinic.com/Dishwasher-Repair-Help ... Dishwashers

I need to get a manual and a power washer hose. I have a blue max washer and I have lost the manual ,I need a manual and a powerwasher hose. It has a 2.4 horse power OHV enginStock #PW2200/03435 Hongcheng water cleaning hose 150bar [15 mpa] Thank you for your help. Marty


... Psi Blue Max 2200 High Pressure Gas Power Washer

2000 epw Northstar Item # 157942E 230v 2000 psi 3.5 gal/min #5 nozzle Problem: No pressure. Motor running...seems to be in bypass. Checked starter...but not finding power to the pressure regulator. May need a new starter/relay/contactor. Was working fine..May wish to order a starter and a possibly a pressure regulator...I have photo's of the complete set up if needed. Need to know part numbers to order and what company to order from. Thanks, Greg Scott


... North Star Stainless Steel Under Car Cleaner 16in

My mother has cancer so needs me to research her problem with her dishwasher. My mother's sink drain water is emptying into the dishwasher. It has to be manually removed since she does not cook much and therefore no longer uses the dishwasher as much as she used to. Is there anything I can do without calling a repair man or plumber? And if I must call a repair man, which should I call, a Maytag repair man or a plumber?


Problems associated with water from the kitchen sink back filling into the dishwasher are caused by the drain line on the dishwasher not having a high end loop. In simple terms, the dishwasher line is too low and is providing a path for the water to ... Maytag Dishwashers

I have a Honda GX390 power washer and need to know what special fluid to use for inside the power washer itself. Thanks.


30w non detergent pump oil, not motor oil. ... Honda Pressure Washers

I have bosch shv57c03uc/40 built in and the water is not draining on the bottom I already took the spout in the center out to see if anything was stuck but I did not see anything would you kindly suggest something else before I call someone to service it?


Hi,Here is a tip that I wrote that will help you with your dishwasher not draining problem...Dishwasher ... Bosch 24 in. SHV57C03UC Built-in Dishwasher

Service Manual Hi I need a service manual for Kleenmaid DW22i dishwasher Thanks Caroline


Http://www.tradebit.com/tagworld.php/dishwasher\015\012\015\012\015\012\015\012Above is a link for your service manual, below is another generic servi ... Dishwashers

The electronic panel on the top of the door doesnt light up anymore and is unresponsive, when the power is turned on, the machine makes a sound like its running or draining or something, but nothing is happening. This all started after a potential electrical disruption following a power outage. Perhaps there is a fuse or some relatively easy way to fix this? or am I screwed and should just call a repair man. Thanks for your suggestions, Brodie


... Bosch 24 in. SHX56B05 Stainless Steel Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1257 seconds